Club126UK
Fiat 126 Chat => Fiat 126 Chat => Topic started by: f40fanatic on January 10, 2011, 10:51:06 PM
-
does anyone know if these will fit straight onto a bis? or are will they need adjusting etc?
Dave.
http://www.126fan.sk/eshop/index.php?main_page=product_info&cPath=20&products_id=561
-
They bolt straight on! :D
-
awesome. buying them then! theyll look great!
cheers.
-
just make sure you buy the bolts and rear bracketty bits, cue ciaoflyer.
-
Ditto
Bumpers are easy to find but without the brackets..... >:(
-
if you have a problem with getting the brackets, just make them they are quite easy to produce and bolts are easy to get in metal shop, it is just a bolt with round head and squere lock as is doesnt turn whiele screwing the nut
-
klkl, cheers guys, ive noticed on the side of my fiat on the rear bumper there is another bracket, the chrome bumpers dont go round the side, does this bracket come off?
-
The side ones are not used, just fill the holes (weld, filler, chewing gum)
It will still show it was a conversion.
-
I like to see chrome bumpers on a 126 with the standard body it gives a more retro look like the 500. The black bumpers that followed on just had the same two bolt holes and a sturdy steel backing (got a spare front one if anyone needs one) . The bis bumper is deeper & has that wrap round but in my opinion is the least sturdy of all being just a plastic shell.
You will have those side holes front & back and all you need is four blanking grommets which will probably cost less , last longer and look better than chewing gum [-/
-
Forget the chewing gum and grommets, what you need is a grinder. I'm all for the retro look too but the chewing gum and grommets still leave the dimples/pimples in the bodywork - not very retro looking ;D
-
Bugger the look of the thing!
The Plastic bumpers that followed the chrome weigh like must be close to 10kgs!
One could re-distribute weight on the car just by leaving the front bumper on and removing the rear one!
I think the BIS bumpers were good and light but consider there is alot of work in the conversion to chromies for a BIS. Thats remove corner bracket points from wings front and back. Re-locate fog light and reverse light.
Doesnt sound alot but angle grinding and painting and filling etc involved, so if you work shy and a DIY disaster might not be the thing to persue..
Sturdy?
Who cares drive into something with any of the bumpers and you throwing it in the skip! :P
-
or just get them to hit you sideways...
-
How is that going with sorting that out Mick?
-
and guys don't forget if you go for retro look 126 which originally came with chromes had also narrow arches, and about the weight i have both types , i have to weight them
-
I did mine with the standard bis mounts I just cut and welded them and they fitted a treat, just cut out the dimples and weld a small repair panel where the dimples lived and paint..
just dont start going for boltless bumpers with flush indicators like I did gets complicated.... :)