Club126UK

Fiat 126 Chat => Tuning & Customising 126 Models => Topic started by: backinblack on November 19, 2010, 10:19:03 PM

Title: 126 Disc brake conversion possibility?
Post by: backinblack on November 19, 2010, 10:19:03 PM
A few years ago i finished off a couple of these buggies from unfinished projects, and remembered today that they did a disc conversion for their earliest model the blitz 1, which was based around a 126.(guilty of hoovering up a good few of the 126's i'll bet) Can anyone tell me if this would be a viable conversion? any thoughts are much appreciated. http://www.blitzworld.co.uk/disc-brake-fiat126-blitz-1-kr2-i44.html
Title: Re: 126 Disc brake conversion possibility?
Post by: dajwid on November 19, 2010, 10:25:02 PM
See the many many many post on the subject on the forum. Use search facility.
Title: Re: 126 Disc brake conversion possibility?
Post by: backinblack on November 19, 2010, 10:30:00 PM
Aye, I had been searching all over, but the cost was huge and these do seem ridiculously cheap [-/
Title: Re: 126 Disc brake conversion possibility?
Post by: skelz on November 20, 2010, 12:38:16 AM
mmm looks too good to be true... anybody fitted these ?
Title: Re: 126 Disc brake conversion possibility?
Post by: Rusty's Uncle on November 20, 2010, 07:52:35 AM
I wonder if either of you guys read below the top line to see what you get for just over £35 plus carriage or did you use the search facility on the forum  ???
Title: Re: 126 Disc brake conversion possibility?
Post by: skelz on November 20, 2010, 08:46:43 AM
yep did both still none the wiser !!!  :- :oops:
Title: Re: 126 Disc brake conversion possibility?
Post by: Eklipze3k on November 20, 2010, 09:06:59 AM
All that is is just adaptor plates and the relevant bolts. You still need to get calipers + carriers, discs and pads and probably longer flexi hoses too (?). Now to be fair, the calipers+carriers should be easy enough to find as plenty of Cinq/Sei owners upgrade theirs to Punto GT, and it the Cinq/Sei or low spec early Punto ones you need for the conversion (240mm disc), and depending where you look the discs and pads can be had for cheap too.
Title: Re: 126 Disc brake conversion possibility?
Post by: ciaoflyer on November 21, 2010, 10:49:29 AM
I have a complete set from Rusty but not fitted yet but I know it is made up from parts of other fiats........
Title: Re: 126 Disc brake conversion possibility?
Post by: Darrell on November 21, 2010, 03:21:51 PM
Probably said this in one of the original threads...BUT....here we go again..

Got a set of 'Rusty's' , fitted on the car with Seicento calipers and discs.

It was a fairly strait forward job to do and have not looked back.
Rusty sorted braided hoses and bleed nipples for all round, the only thing i needed was 3mm spacers to pull the caliper away from the disc.
I can now watch the terror in arse-creep's faces when they find out that not only can the little car go round corners very fast, and can keep-up with the traffic, but can stop better than most (in the dry)

If it seems too good to be true there are available the 3-500 quid conversions on e bay :P