Club126UK
Fiat 126 Chat => Fiat 126 Mechanical Problem Solving => Topic started by: Kent126 on November 19, 2010, 12:08:26 PM
-
My engine lid shuts, but the lock doesn't work. I can put the key in, but it wont turn. I have has the lock off, and thoroughly cleaned it and given a good coating as best I can with WD40, still no joy.
Is there any way of fixing this little problem, or will I need to replace the whole lock?
The only other thing I was thinking, is that maybe the lock has been replaced but the correct key is missing?
Regards,
Tom
-
Take it to a local locksmith, they should be able to either cut a key or make it fit your existing key which is preferable.
-
blimey, will give the locksmith idea a go. Dont really want to replace it and have a 2nd key, or replace the door locks too just to get a full set.
Cheers
Tom
-
You can dismantle the lock assembly and probably do a fix on it. There is an external circlip on the back of the lock barrel assembly. With that removed you can tap out the rectangular pin then remove the key barrel from the housing. Then if you insert the key you will be able to see if any or all of the little detents are protruding and stopping the lock/unlock . If you have only a couple protruding you can just file them off & let the remaining ones do the work [-/