Club126UK

Fiat 126 Chat => Fiat 126 Mechanical Problem Solving => Topic started by: massa on October 31, 2010, 09:12:29 AM

Title: oil cap
Post by: massa on October 31, 2010, 09:12:29 AM
anyone know if the bis uses the same oil filler cap as the air cooled ie with the spring and the little valve on the end my bis did not have that type on but have a new one with spring and valve on ok to use ? thanks lads  and lasses dave
Title: Re: oil cap
Post by: Pete126 on October 31, 2010, 03:41:32 PM
Hi Dave the oil cap are the same on the air cooled and Bis :D The disc is important without it the induction system starts to pull oil from the engine at high revs and soaks the plugs Which stop firing as i found out on the M1 Motorway, Limping off on 1 cylinder Replaced the plugs at the side of the road and it got me home Replaced with a new air cooled cap and everything is hunkydory now [-/
Title: Re: oil cap
Post by: massa on October 31, 2010, 07:15:07 PM
thanks pete new one fitted are they all sods to start when cold just set points timed using strobe at 10 btdc see what its like tommorow thanks again pete