Club126UK

Fiat 126 Chat => Fiat 126 Chat => Topic started by: dajwid on October 10, 2010, 10:16:25 AM

Title: New babies :-)
Post by: dajwid on October 10, 2010, 10:16:25 AM
Beryl arrived yesterday, work already begun, seats and carpets removed as wet due to leaking sunroof, hoped to get a replacement interior. She runs but stalls as soon as you touch the throttle.

This morning the £100 car from Northamton arrived (the one I posted but nobody wanted), It turned out to be a de-ville with a beige interior in very good condition, so you all know where that will be going. The boot is full of parts, car has done 60,000 (very high) condition can be discribed a 'mature' ;)
The car will be stripped for parts, certainly not repairable without huge investment. Doors are solid as is the bonnet and boot. the rest is 'crusty'.
Engine is at present home to a million spiders, so no idea about condition. I am still very pleased for the price. The carpets, seats , door cards, Engine and gearbox are worth the money alone.



Title: Re: New babies :-)
Post by: skelz on October 10, 2010, 10:56:05 AM
come on mate any pics ??
Title: Re: New babies :-)
Post by: dajwid on October 10, 2010, 12:51:51 PM
Beryl is my Avitar and also in 'my garage'. Looks like this:

(http://i673.photobucket.com/albums/vv95/fronty4sale/002-2.jpg)

The donor car :( looks like this, note unwashed, exactly as she arrived off the trailer after standing for 3 years in a garage. But for £100 it's complete and a boot full of bits too.
 (http://i673.photobucket.com/albums/vv95/fronty4sale/002-1.jpg)
A bit crusty
(http://i673.photobucket.com/albums/vv95/fronty4sale/004-1.jpg)
Spiders webs galore
(http://i673.photobucket.com/albums/vv95/fronty4sale/005-1.jpg)
Dirty but in good nick.
(http://i673.photobucket.com/albums/vv95/fronty4sale/006-1.jpg)
Title: Re: New babies :-)
Post by: dajwid on October 10, 2010, 02:01:51 PM
Ok interior stripped, some parts of the car are actually not as bad as it first looked.
Floor is solid but been welded.
Battery area solid (shock)
Sills both been welded one side rotten at the front, not very solid at all.
around screen front and rear rotten, very rotten, no suprise there.
Front panel badly dented.
Doors fairly good as is bonnet and boot.

(http://i673.photobucket.com/albums/vv95/fronty4sale/126new001.jpg)
(http://i673.photobucket.com/albums/vv95/fronty4sale/126new002.jpg)
(http://i673.photobucket.com/albums/vv95/fronty4sale/126new003.jpg)
(http://i673.photobucket.com/albums/vv95/fronty4sale/126new005.jpg)
(http://i673.photobucket.com/albums/vv95/fronty4sale/126new006.jpg)
(http://i673.photobucket.com/albums/vv95/fronty4sale/126new006.jpg)
(http://i673.photobucket.com/albums/vv95/fronty4sale/126new012.jpg)
(http://i673.photobucket.com/albums/vv95/fronty4sale/126new013.jpg)


Car has a frame fitted to attach to a camper (anyone want it)?, no use to me. Just come over and remove it.

(http://i673.photobucket.com/albums/vv95/fronty4sale/126new015.jpg)(http://i673.photobucket.com/albums/vv95/fronty4sale/126new014.jpg)
(Could be a wheelie bar fitted at the wrong end though.


Personally I think the car is too far gone. What do you think? Tons of parts and a great trailer to be made from the rear end.

Welding would cost more than the value of the finished car.







Title: Re: New babies :-)
Post by: Darrell on October 10, 2010, 05:03:34 PM
pm sent  [-/
Title: Re: New babies :-)
Post by: dajwid on October 10, 2010, 05:54:40 PM
Replied.
Title: Re: New babies :-)
Post by: bis13 on October 10, 2010, 07:02:56 PM
that looks a good bit of purchasing you have done there shame the red de ville is a bit worse for wear, like you said the engine is dirty but that i am sure will be fine along with all the running gear, glass  [-/etc.
Title: Re: New babies :-)
Post by: Pete126 on October 10, 2010, 08:06:54 PM
Good luck with the project Dajwid, Hope to see it next year [-/
Title: Re: New babies :-)
Post by: dajwid on October 10, 2010, 09:05:16 PM
Plenty of good bits on the car, well worth £100, certainly enough bits to sort out Beryl. Cold winter nights in the garage me thinks.
Title: Re: New babies :-)
Post by: dajwid on December 13, 2010, 05:50:02 PM
Done a fair bit to Beryl.

Carpets all removed as were soaking wet, I have cleaned and dyed them all black. Came up like new.

Interior bits all removed cleaned and sprayed where needed. Floor rust sealed.

Seats removed as all worn out and dirty and stripped to re-upholster (I have never tried but I will have a go, can't be too hard can it?).

(http://i673.photobucket.com/albums/vv95/fronty4sale/l118.jpg)

(http://i673.photobucket.com/albums/vv95/fronty4sale/l122.jpg)

New NOS RHD headlights fitted (I managed to buy a few sets   ;D  )
(http://i673.photobucket.com/albums/vv95/fronty4sale/l120.jpg)


Window trim removed and resprayed.

To do list:-

Work out why indicators don't work
Get the car running  :D, Turning over but won't run.
MOT
Sort out the couple of small rust patches.

pleased with the car, although suprised by the couple of rust patches so soon after a full respray :-

*******************************

The other car, Mmmmm as you may remember I totally stripped the car, Half got dumped, the back end is slowly changing into a trailer project.

(http://i673.photobucket.com/albums/vv95/fronty4sale/Nov2010065.jpg)

(http://i673.photobucket.com/albums/vv95/fronty4sale/Nov2010057.jpg)

Plan on having it the same colour as beryl.
Bought myself a Mig welder now need to learn how to use it to finish the work I have started.

anyone got a rear chrome bumper spare?



Title: Re: New babies :-)
Post by: Draigflag on December 13, 2010, 07:49:56 PM
Haha that's awesome! Good work  [-/
Title: Re: New babies :-)
Post by: dajwid on January 29, 2011, 04:36:32 PM
Cheated :oops: I bought a pair of leather seats (Ebay). Look like they should go in OK. I will need to remove runners from old seats, the seats are only 4CM wider than originals, so should be OK.

Tommorow clean up the leather, then next week out with the angle grinder.

(http://i673.photobucket.com/albums/vv95/fronty4sale/29012011238.jpg)

(http://i673.photobucket.com/albums/vv95/fronty4sale/29012011239.jpg)


I had a play with the poor running, dies as soon as throttle touched.Plugs, timing, fuel seem OK. New carb and insulator on its way.

Too cold in the garage to do too much, where is this global warming when we need it?

Title: Re: New babies :-)
Post by: Pete 126bis on January 29, 2011, 11:06:21 PM
Have sent you a PM cheers Pete
Title: Re: New babies :-)
Post by: bis13 on February 02, 2011, 05:51:42 PM
does the car idle okay then when you rev it dies? it sounds like our old friend mr fuel pump giving up the ghost..
Title: Re: New babies :-)
Post by: dajwid on February 02, 2011, 09:12:03 PM
Only idles on full choke, touch the throttle it dies.
Title: Re: New babies :-)
Post by: dajwid on February 26, 2011, 06:18:28 PM
Spent a bit of time in the garage today.

Leather Seats look like they will fit, I have been busy with the angle grinder and removed all the 'unwanted' trim and brackets.

Bought matching leather for the door cards, started retrimming them, looks easy on TV :oops:

Bought a Facet pump, regulator and fuel pipe. So hope to have time to fit tomorrow, still waiting for new carb to arrive.

chrome mirrors arrived, so another little job to fit.

Title: Re: New babies :-)
Post by: Darrell on February 26, 2011, 09:32:16 PM
You will love that electric fuel pump [-/

Only issue I had is that on the dellorto fzd the bypass back to the tank had no restriction in it thus the pump battled to fill the carb at full throttle so I turned-up a restrictor with a 1.5mm hole I think it was in it and it's been fine ever since.

When I tried blocking-off the bypass to the tank the regulator would close completely when idling for a while and then refused to open :-X Always happened in heavy traffic :-X

Best thing is no cranking to get fuel through  [-/
Title: Re: New babies :-)
Post by: dajwid on March 03, 2011, 05:28:25 PM
Made up a mounting plate to mount the pump and regulator on the left hand side of engine bay.

(http://i673.photobucket.com/albums/vv95/fronty4sale/043.jpg)

Ready to fit at weekend.

A couple of refurbed carbs ordered from Poland and a couple of other bits and bobs.

waiting for the postman.
Title: Re: New babies :-)
Post by: dajwid on March 05, 2011, 05:36:00 PM
Ahhh, nice weather, lots done in the garage at last.

(http://i673.photobucket.com/albums/vv95/fronty4sale/004-2.jpg)

Bought some Chrome bullet mirrors, Aggghhh bloody things, lost my knuckles, then gave up swearing.

Title: Re: New babies :-)
Post by: dajwid on March 11, 2011, 04:47:43 PM
Bullet mirrors fitted.

 (http://i673.photobucket.com/albums/vv95/fronty4sale/020.jpg)



Door cards re-covered in Black leather and a handle fitted. (why did,'t Fiat fit a handle) Mine is thanks to a Jaguar XJS.

(http://i673.photobucket.com/albums/vv95/fronty4sale/018.jpg)

Before:-
(http://i673.photobucket.com/albums/vv95/fronty4sale/019.jpg)

Title: Re: New babies :-)
Post by: dajwid on April 09, 2011, 05:49:24 PM
Pump  and regulator leaked took all apart, tried everything I could then cured with PTFE tape (thanks for the tip).
Then couldn't get it to pump at all. (battery was dead) At last sorted out.

Couldn't get it to run well (full choke only, stalled if I touched the gas) so re-manufactured carb fitted, leads, points, condenser, plugs. Timing checked.

Then it turned over but wouldn't fire Aghhhhhh! Back to square one, no spark ( After a lot of head scratching and a few strong words) Turned out to be the brand new condensor, old one put on and she runs. :-)
Hurray!!  :D

Quick brake service and MOT looming. ::)

Will it actually be back on the road?
Title: Re: New babies :-)
Post by: dajwid on April 17, 2011, 07:39:29 PM
Aghhhhhhhhhhhhhhhhh!

It was all going too well,  all was all OK, then I noticed an oil leak from rear of the engine.

i assume as car was standing it will be valve stem seals   :( as tend to harden and go brittle if these stand unused.

time for the head to come off, never-mind at least I will know it's a job done.

it will be on the road one day :$
Title: Re: New babies :-)
Post by: bis13 on April 18, 2011, 09:33:09 PM
dave pull of the thermostat housing and run the car and watch where it comes from is the rocker cover okay as most leaks come from there and tend to drip down or fly around if leaking from behind the carb.
the stem seals are little little rubber rings at the top of the valves do you mean the push rod cover seals?
Title: Re: New babies :-)
Post by: dajwid on April 18, 2011, 09:48:34 PM
I will have a look this weekend, yes the push rod cover seals.
Title: Re: New babies :-)
Post by: vavreklam on May 12, 2011, 11:50:58 PM
Hello Dayvid!

Te magyar vagy?
Tudnál nekem segíteni?
A tavaly vásárolt donorautódból eladnád nekem a térképtartó polcot?
Nagyon szeretnék venni egyet.

Vavrek László
Title: Re: New babies :-)
Post by: dajwid on June 20, 2011, 08:19:09 PM
Latest update:

Oil leak sorted. new vinyl interior fitted, very posh.
Car now runs Hallelujah!, Indicators work, hurray (but not showing on the dashboard >:(

I have removed the dash, a couple of dead bulbs, bad connections but problem still persists. the lights showed if car was running , but stopped working the following evening.
I am sure in my other 126s I had I could hear if the indicators were flashing, am I wrong??





Title: Re: New babies :-)
Post by: fiatmaluch126 on June 20, 2011, 09:53:40 PM
Hi Dajwid, my indicators make a clicking noise m8.
Title: Re: New babies :-)
Post by: Darrell on June 20, 2011, 11:04:33 PM
Dave has your carb still got the bypass fitted?
Title: Re: New babies :-)
Post by: dajwid on June 21, 2011, 06:12:14 PM
Still has return to tank.

Why don't my indicators click? They flash but don't click or flash on the dash  :o
Title: Re: New babies :-)
Post by: fiatmaluch126 on June 21, 2011, 10:12:52 PM
Hi dajwid, are all six flashing? if so check bulb in dash/ maybe bad earth/connection there!?  ;)
Title: Re: New babies :-)
Post by: Darrell on June 21, 2011, 10:27:04 PM
Check the bulb wattages are correct and all bulbs are working.

It is Fiat's patented diagnistic system where one bulb out it stops clicking  :P

The only reason I ask about the return to tank is those regulators do not like running without the return as I found out when I ran a bike carb without a return.
Title: Re: New babies :-)
Post by: 124cso on June 28, 2011, 02:07:52 PM


 (why did,'t Fiat fit a handle) Mine is thanks to a Jaguar XJS.

Answer is that they did. It's the poles who took them off
Title: Re: New babies :-)
Post by: Rusty's Uncle on June 28, 2011, 02:33:42 PM
Actualy the later Italian built cars also dropped the pull handles and I gues the Polish builders just did what they were told. I would guess that the captive nuts are still ther behind the door cards so pull handles could be fitted and they are cheap to buy.