Club126UK
Fiat 126 Chat => Tuning & Customising 126 Models => Topic started by: robinoz on September 26, 2010, 08:30:19 AM
-
hi all just after a bit of advice for my 126 project anyone know if these wheels would fit straight onto a standard aircooled 126 cheers
http://cgi.ebay.com.au/ROH-13-MAG-RIMS-X4-/140455203541?pt=AU_Car_Parts_Accessories&hash=item20b3c852d5
4X 13" ROH MAG RIMS tidy condition look great with not too many scratches, one rim has a few little curb scratches on it, came with a barina i purchased but have never been fitted to it. nice looking rims will smarten up any 4 stud front weel drive car!! pick up only, item in berwick victoria 3806.
from centre to centre diagonally stud holes are 100mm apart
tyres are YOKOHAMA 165/70
-
The wheels listed are GM/Vauxhall Corsa 4 x 100 PCD - 42...45 Offset - 56.5 Centre Bore
The Fiat 126 wheels are ......................4 x 98 PCD - 30...38 Offset - 58.0 Centre Bore
As you can see The PCD/Offset/Centre bore Are all Different + The Tyres Are the wrong size :(
This Site will help you with what wheels will fit, Check out Alfa/Fiat/Lancia (Scroll down to the classic car section)
http://www.carlsalter.com/wheel_fitments.html
-
As Pete said, all the important figures are wrong. The wheels could be made to fit if you could get a machine shop to enlarge the centre bore, get some 10mm spacers and wobbly bolts. Then you could change the tyres and Robert's your mothers brother.
-
Ok going to show my ignorance Whats wobbly bolts. I prefer it when the wheels dont wobble.
-
http://club126uk.co.uk/smf/index.php?topic=4898.0 ;D
-
Thanks Pete
-
No Probs :)
Just thought i'd mention that if you use spacers you can't use wobble nuts as there is no way to centralize the wheel [-/
-
No Probs :)
Just thought i'd mention that if you use spacers you can't use wobble nuts as there is no way to centralize the wheel [-/
Hubcentric spacers ;) I've got a set of 14's for the Sei which are 4x100, 10mm hubcentric spacers and 40mm wobbly bolts and it all works perfectly :)
-
The reason why i didn't mention Hub-centric spacers is because they are expensive, I can't see the point of buying a set of cheap second hand wheels then spend double the price of the wheels on adapters, If money's no problem then anything is doable :D
-
Double the price?! :o
Either you're buying hella cheap wheels (and if so, tell me where, lol) or are getting confused with hub adaptors to convert fitment from say 4x98 to 5x108. I know those cost well in excess of £150 per axle and are generally stupidly thick (like 25mm+), but simple hubcentric spacers are much less, the set I got were around £80 for all 4.
-
thanks for the advice i think ill keep looking for some 4x98 cheers all
-
Double the price?! :o
Either you're buying hella cheap wheels (and if so, tell me where, lol)
80 Quid.... :o :o :o
Bought These on Ebay some months ago Compomotive Sparko alloys with Abarth centres 98PCD-5.5j-13" The set £58 :D They need a little fettling and spraying up but they are a Classic Wheel and I think more suited to the 126 ;)
Robin, keep L :) :) king some wheels will turn up eventually their are still bargain to be had [-/
-
If you think of bigger wheels, why don't you think of those:
http://www.youtube.com/watch?v=LASh-bAJ8Ko
;D
-
Ha ha ha, fantastic 22" wheels on a 126. Not really my taste :(, but the wheels are worth more than the car.
-
I'd have to agree dajwid. I'm a fan of bigger wheels on any car but i think every car has a max size limit and 22s on a 126 seem just a tad too big. I'll stick with my 15s.
I didnt know they made 22" tyres that skinny, wonder what it would handle like :o
-
a horse and cart would compare i suppose.
-
a horse & cart would have more suspension travel and the horse would make for a more independent front end. The horse & cart is just in a different league. halfway thru the vid the car looks like it tracks severly to the right, but it could be driver induced
i tentatively drove my car around the block with the 15" wheels on it and although the track was wider the body rolled a lot more purely due to the increase in cog which incidentally was 185mm. These wheels are intended for my project and were only put on for the photo.
The ride height inceased to a whopping 305mm - i could fit a standard ruler under the sills. This car must have no suspension travel at all to be sitting at that height with 22s on.
i guess that 147 could do with some camber adjustment lessons from you Bis or alternatively a couple of trolley wheels bolted sideways to the roof gutter rails for when the inevitable does happen......