Club126UK

Fiat 126 Chat => Tuning & Customising 126 Models => Topic started by: Worm on August 10, 2010, 07:13:16 PM

Title: Dwell Angle Meter
Post by: Worm on August 10, 2010, 07:13:16 PM
Does anyone know of a good dwell meter with tach o (revs at idle) for sale. Do people on here tend to check their distributer dwell angle or just rely on points gap with feeler gauge?
Title: Re: Dwell Angle Meter
Post by: smallcox on August 30, 2010, 08:55:23 AM
Hi Worm,

 The correct way to set up points would be to use a dwell meter, but I personally have never owned one. Providing you rotor shaft bearings are in good condition and the rotor is not blowing in the wind then set the points 19-21 thou should be as good as you will get, after all the points only open 2 times per cam rev. Dwell becomes more important on 6 cyclinder car etc. [-/

Smallcox