Club126UK

Fiat 126 Chat => Tuning & Customising 126 Models => Topic started by: thepuddlejumper on August 08, 2010, 11:13:50 AM

Title: Clutch Upgrade
Post by: thepuddlejumper on August 08, 2010, 11:13:50 AM
Heard it was a good idea to upgrade the clutch friction plate to a 127 sport, anyone done this ? and if so is it only the friction plate required, does the standard cove plate fit ?.

Ralph
Title: Re: Clutch Upgrade
Post by: GTMaster on August 08, 2010, 04:07:05 PM
(What i heard was that a clutch from an mk1 Ibiza will fit a 126. Apparently these clutches have those torsion springs in them.)  ???
Title: Re: Clutch Upgrade
Post by: dajwid on August 08, 2010, 06:38:09 PM
Mk 1 Ibiza is a Fiat panda, so I wouldn't be surprised at all.

Title: Re: Clutch Upgrade
Post by: jokke on August 09, 2010, 03:47:13 PM
Clutchsett for Ibiza mk1 1.2i
• Lamell 17 splines
• Diameter [mm] 190
(http://catalog.meca.no/Upload/images_web/Marknad%20v2-3/1240-619049600.jpg)
Title: Re: Clutch Upgrade
Post by: dajwid on August 09, 2010, 03:59:35 PM
Sorry I'm thinking of a Marbella
Title: Re: Clutch Upgrade
Post by: handsomery on August 18, 2010, 03:25:43 PM
I'm sticking a new gearbox in my BIS this weekend. whilst I'm in there I should probably give it a new clutch as I've been somewhat over working this one.

does anyone know if the panda/ibiza clutch would fit, cos I'm sure they're much easier to obtain.
cheers
Title: Re: Clutch Upgrade
Post by: ciaoflyer on August 18, 2010, 06:23:00 PM
Sorry I'm thinking of a Marbella

I want a Marbella in bright yellow!
Title: Re: Clutch Upgrade
Post by: 1973/126 on August 18, 2010, 07:28:37 PM
 We had one with a 903cc engine and it was great fun. Very usable and it did over 50mpg. It wasn`t yellow tho. :oops:
Title: Re: Clutch Upgrade
Post by: smallcox on August 29, 2010, 11:21:47 AM


Ordered a clutch plate for a 127 in the past, the splined centre is the same but the cover plate will not fit. slightly larger in diameter, also at present I have fitted a bis clutch complete (cover and plate) in my little car and it seems to work well, and has an added bonus the pedal effort to operate the clutch is a lot less than the original air cooled one [-/

Smallcox
Title: Re: Clutch Upgrade
Post by: thepuddlejumper on August 29, 2010, 12:09:25 PM
I have various answers from lots of places, even a company selling a cover plate which is for a 500,126 and 127.  Some of the listing have the 127 903cc at 160 mm and others have it at 170mm.  Does the bis have the torque springs in the friction plate? Think I may go down the bis route Thanks for the info.

Ralph
Title: Re: Clutch Upgrade
Post by: smallcox on August 29, 2010, 12:14:52 PM
Hi Ralph,

Yes the Bis plate has the springs in it and the clutch cover fits directly to the 650 flywheel with no mods required [-/

Smallcox
Title: Re: Clutch Upgrade
Post by: Rusty's Uncle on October 12, 2010, 04:47:01 PM
 :D I just came across a complete Panda 30 clutch on eBay at the weekend . £19.99 & free delivery  [-/
Arrived today , has the same bearing , torque spring plate & I believe a higher spec cover. Worth keeping an eye out for .