Club126UK
Fiat 126 Chat => Fiat 126 Mechanical Problem Solving => Topic started by: Rusty's Uncle on July 31, 2010, 07:24:20 PM
-
??? What does this bit do , seems like some sort of resistor that fits at the top of the front panel on the later 126s ???
-
I've seen that one on my old BIS. Think it's something to do with the lights.
-
thats the ballast resistor, it's wired in line with the coil.
Once warmed up its supposed to prevent the coil from drawing too much current and reducing its lifespan.
-
If it is the part I think it is it reduces current to the low beam on the head lights so the low beam filliments are used for park lights. Pretty sure it is not a ballast resister.
Allan
-
try unplugging it and see if your car still starts
-
Don't own a Bis myself but noticed it is only fitted to the Bis and its got heavy duty cable to it, just another guess but does it control the cooling fan to give it two speeds ie, low speed runs all the time and when thermostat demands (engine hot) runs at full speed?
maybe the flux capacitor :P :P :P :P
-
I'm not trying to guess, it is a ballast resistor!
I don't think they were fitted until the wasted spark coils were introduced which s why they're only fitted to later 126's
-
it is a ballast resistor they were fitted on the bis and late fsm aircooled.
-
you sure it's not a temperature sensor for the climate control :D
-
>:( Damn , I thought that it was a flux capacitor , that is why I put my smurf glove on to handle the radio activity :oops:
-
Eurika! It's the heating element that makes the BIS boil! :P
-
look here gentlemen and rusty, Fiat know there cars break down so fitted this, which is a heater to heat up the tool kit so you don't get cold hands when you break down at the side off the road and have to "Fix It Again Tony" :P
-
I come back to my origional thought that it reduces the current to the low beam of the headlights when the key is turned on and the park position is selected. With the key off the standard park light bulb comes into play.
Does anyone one to start a guess the part for 126?
Allan
-
It is a sort of Ballast resitor, but it is not the sort fitted in line with the coil. These were fitted in the front of the car and were used to reduce the current to the lights.
I have previously wired this type of resistor to my coil and it does work fine, however it is not the type designed to deal with the heat of the engine bay etc. The correct type for this is the ceramic jacketed smaller type, like this
http://cgi.ebay.co.uk/NEW-BALLAST-RESISTOR-Spitfire-Stag-GT6-TR5-TR6-etc-/120599119165?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1c1444853d#ht_500wt_1038
-
Dom, how did you get that pic of your 500 with the front wheel in the air?
I've been told by friends who have tried following me in my 126 that is lifts a front wheel in a hard turn :oops:
-
http://www.fiat500.cc/store/comersus_viewItem.asp?idProduct=307
Go to the above link, and read the 2nd last line.
Its fitted to the front of the car to avoid heat from the engine affecting its resistive value. Incedentally since the coil lead runs from the fron of the car to the rear it could be fitted anywhere, its just a coincedence that its fitted near the headlights
-
Is that your wedding speech :oops:
-
that was quick Rusty, but I think it makes less sense now!!
-
Dom, how did you get that pic of your 500 with the front wheel in the air?
I've been told by friends who have tried following me in my 126 that is lifts a front wheel in a hard turn :oops:
I think with mine I have more chance of getting the back up whilst driving. That picture was taking using magic. Or in actual fact I just used the standard jack that came with the car, in the side jacking point and jacked it up full. Then just took the picture from the front and voilla!
-
Gentlemen please.......... let us return to the origional question ie "WOT IS IT".
It is in fact a headlight resister found on many models of Fiat and Lancia of the late 1980s and early 1990s. For those of you who would disagree it's part number was 82428191 and description "headlight resister'. It was fitted to UK and Ireland spec vehicles.
I rest my case.
Thank you Uncle Rusty for the stimulation this post has provided for some of us who have nothing better to do with our time.
My very best regards to you all.
Allan
-
Nope! I'm sticking with flux capacitor :P
Once it's working we're going forward in time to get some lotto numbers [-/
-
Is that it?
-
Are you sure its not one of those black boxes to plug a dianostic laptop into...????
-
(http://i32.photobucket.com/albums/d18/ciaoflyer/Wir28-1.jpg)
Here it is in the manual it is the DIM DIP resistor
-
So why is it glowing pink?
-
It likes to dress up! ;D