Club126UK
Fiat 126 Chat => Tuning & Customising 126 Models => Topic started by: TLT on July 20, 2010, 09:40:16 PM
-
Hello !
Does anyone knows where I could get a brand new Air intake hose connecting carburetor and pan ( Plastic tube linking the air filter and the carburetor) for a 1991' Fiat 126Bis? Axel Gerstl told me it is not longer available and out of production... A plan B anyone ?!!!
Regards,
TT
-
No reply up to now... Do you know if I can use Air intake hose from other models? Any advice on this? I really need to replace mine...
-
is it the black 90 degree bend hose you mean, at the picture here it have som red stuff on it?
(http://www.126bis.de/div/motor1.jpg)
is so, why not just use a aftermarket siliconehose?
-
Yes it is... Ok for an aftermarket one, but which one for instance... Do you have a link ?!!!
-
just measure the diameter ot inside of the tube, and do a quick search on ebay.
http://stores.ebay.co.uk/Auto-Performance-Silicone-Hoses/90-Silicone-Elbows-/_i.html?rt=nc&_fsub=250619419&_lns=1&_sid=69199769&_trksid=p4634.c0.m14.l1513&_pgn=2
-
Ok thanks for the link I'll try this, anyone knows the diameter of the Air intake hose on the 126 Bis coz If I remove mind it will be unusable...
-
Think you might be talking about one of these , I found a good used one in my spares & do not have a Bis anymore ;D
-
I no longer has this rubber pipe, I simply have a bolt on air filter, and to be honest since it was serviced and tuned by a garage it has been running great. Its also better on fuel and sounds nice and throaty.
-
Think you might be talking about one of these , I found a good used one in my spares & do not have a Bis anymore ;D
Hi Dave can i have it Please :P
-
Think you might be talking about one of these , I found a good used one in my spares & do not have a Bis anymore ;D
Hi Dave can i have it Please :P
Hola Pietro del Leedso [-/
organise this into a well known phrase or saying
SCOLLOBKS