Club126UK
Fiat 126 Chat => Fiat 126 Mechanical Problem Solving => Topic started by: deda on July 14, 2010, 11:33:43 AM
-
Hello
I am new on this forum ,I am from Belgrade Serbia,student,sorry becouse of my english :)
I buy Ngk spark plugs BPR6HS ..and i want to ask ..is that correct spark plug? I have fiat126 650ccm from 89"I plan also to put electronic ignition
Thank you
-
Hello and welcome,
I believe the NGK plug you have is the correct spec just need to check the thread length because there are BPR6HS and BPR6ES. I only use NGK BPR8ES and never had any problems with them.
PS the number refers to the heat range, higher the number the colder the plug 6 is good in a standard engine and with the copper core they have a wider heat range compaired to other makes. ;)
Cheers Steve
-
thank you ,I will check for lenght of spark plug is that correct.I have some very good schematics of electronic ignition and if somebody needs i will send on e mail.Thank you
-
i would like to receive the schematic.
[email protected]
Thanks
-
Hi again,
Just checked the plugs again and the BPR6HS are the correct length, the ES is the longer thread which I use not in the 126 but Triumph engine.
Cheers Steve [-/