Club126UK

Fiat 126 Chat => Your Restorations => Topic started by: Darrell on June 02, 2010, 10:06:34 AM

Title: the bug
Post by: Darrell on June 02, 2010, 10:06:34 AM
This is the engine so far. It's no supermodel but she is in daily use and is now sporting and extended rocker cover, alloy sump and a carb from a Honda CX 500 which I put on as a trial. Seems to be going ok so the piece of rope will get replaced by a more permanent linkage, that's if I dont find an FZD in the next few weeks.
The oil breather is going to get re-routed into a catch can. I bunged the filter on there for now as I've had it in bits so many times these past few weeks but now she seems to be running very well indeed ;)

Title: Re: the bug
Post by: Darrell on June 08, 2010, 04:18:17 PM
Delorto FDZ30/24 carb purchased today  8)
Title: Re: the bug
Post by: Darrell on June 13, 2010, 11:05:00 PM
.
Title: Re: the bug
Post by: Darrell on June 13, 2010, 11:23:46 PM
.
Title: Re: the bug
Post by: Darrell on June 13, 2010, 11:29:52 PM
Primer was a welcomed sight [-/
Title: Re: the bug
Post by: Darrell on June 13, 2010, 11:36:43 PM
Ally sump fitted :oops:
Title: Re: the bug
Post by: thepuddlejumper on June 13, 2010, 11:42:23 PM
Darrell like the arch extensions how did you do them? What colour is it going to be?

Ralph
Title: Re: the bug
Post by: Darrell on June 13, 2010, 11:46:32 PM
Misty couldn't wait for the smelly red thing to me out the garden...
Title: Re: the bug
Post by: Darrell on June 13, 2010, 11:49:39 PM
Hi Ralph,

These are all pics of the same car  :oops: They are some old pics I found of it when I was still fighting with sprayguns and welders and pistons gearboxes etc [-/
Title: Re: the bug
Post by: 1973/126 on June 13, 2010, 11:52:06 PM
 Hey Darrell have you fitted the Dellorto yet? If so how is it working?
 The car is looking good. I thought they must have been some older pics...
Title: Re: the bug
Post by: Darrell on June 13, 2010, 11:57:58 PM
The Bug made it from Southampton to Kent, didn't miss a beat and Mick followed us down to Ramsgate
Title: Re: the bug
Post by: Darrell on June 14, 2010, 12:00:12 AM
Hi, no unfortunately no Dellorto arrived yet, made me a bit grumpy but it is coming from Italy, was hoping I could play with it this weekend as the car is in daily use and cannot afford to much about in the week....or I end up having to use the bike [-/

Wifey isnt impressed with riding on the bike :oops:
Title: Re: the bug
Post by: Darrell on June 14, 2010, 12:03:54 AM
the one bike  :oops:
Title: Re: the bug
Post by: Darrell on June 14, 2010, 11:36:22 AM
Arrived in the post today  :D :D :D :D [-/
Title: Re: the bug
Post by: Darrell on June 14, 2010, 12:34:37 PM
Looks like a monkey has been fiddling with this carb...the accelorator pump is set-up so it doesnt work and the choke mechanism is missing....hey ho time to start getting creative with stainless and make a new one. Anyone got an FZD 30.24 that they can take pictures of the choke mechanism? :oops:
Title: Re: the bug
Post by: Rusty's Uncle on June 14, 2010, 01:34:09 PM
This is my FZD 32 28  [-/
Title: Re: the bug
Post by: Darrell on June 14, 2010, 02:18:37 PM
Excellent, thank you Rusty you beauty, good enough pic for me to scale the mechanism off too  [-/

More cutting and drilling to follow :oops:

I did e mail Dellorto UK for price and availability but not holing my breath or I'll go blue :-X
Title: Re: the bug
Post by: Rusty's Uncle on June 14, 2010, 04:52:00 PM
So have you got the manifold and special mounting bolts for that carb  ???
Title: Re: the bug
Post by: Darrell on June 14, 2010, 05:00:57 PM
I were going to simply use...umm...bolts with nuts on them. There are special ones? Titanium gold plated with shiney hex heads, locking wire holes costing 350 euros each? :oops:
Title: Re: the bug
Post by: Rusty's Uncle on June 15, 2010, 05:21:21 PM
These are the special mounting bolts that have a double function as cylinder head nuts then have stud extensions to mount the Dellorto manifold.  [-/
Title: Re: the bug
Post by: Darrell on June 15, 2010, 10:32:14 PM
Oh yes got those, I've got them fitted already as I used the Dellorto manifold to fit the CX carb. had to buy a long socket to torque them :oops:
I like you air filter and think I'll use a bako. spacer like your has...where to find one...

Thanks Rusty [-/
Title: Re: the bug
Post by: Rusty's Uncle on June 16, 2010, 06:28:44 AM
I removed the carb from the manifold to have a look at the spacer which is about 6mms thick. I happened to have an old inch & a quarter SU carb on the table so I offered it up and it went straight on. I reckon that a spacer could be got from an SU carb specialist or Morris Minor centre.  [-/
Title: Re: the bug
Post by: Darrell on June 16, 2010, 08:15:26 AM
Hi Rusty,

Excellent work there [-/

Those old SU carbs were good, i wonder how a 126 would run with one on?

I'm going to find me a local Morris place and get one because I think there is value in insulating the carb from the heat of the head :oops:
Title: Re: the bug
Post by: Rusty's Uncle on June 16, 2010, 08:39:15 AM
I have seen one fitted to a 695ccs aircooled & the guy reckoned that it worked very well  [-/
Title: Re: the bug
Post by: gsxr126 on June 18, 2010, 06:15:35 AM
You might be able to find a phenolic spacer from a go-kart parts retailer. I have one on my Yamaha 100s kart motor and size wise it looks like it would suit.

Havent tried fitting it though so dont know.

Just a thought and if suitable might save you some cash.

Title: Re: the bug
Post by: Darrell on June 18, 2010, 09:23:48 AM
I was watching some on e bay, alas work commitments have meant I've let them go :(

I'll take a look at the cart ones, might be something I can do on saturday and get it sorted  [-/

Back to work  ::)
Title: Re: the bug
Post by: Darrell on July 11, 2010, 10:06:47 AM
This might sound a bit sad but...

Happy mileometer birthdat to the bug, just got to 50000 miles  [-/
Title: Re: the bug
Post by: Darrell on July 12, 2010, 12:10:20 PM
Aircooled 1984 Fiat 126            
MileageMiles   Litres   Gallons   MPG
48436   120   15.37   3.38            35.5
48540   104   15   3.30            31.5
48687   147   15.25   3.35            43.8
48791   104   13.05   2.87            36.2
48937   146   14.86   3.27            44.7
49063   126   14.86   3.27            38.5
49205   142   15.55   3.42            41.5
49333   128   13.59   2.99            42.8
49479   146   14.85   3.27            44.7
49623   144   14.97   3.29            43.7
49740   117   13.28   2.92            40.1
49857   117   12.33   2.71            43.1
Title: Re: the bug
Post by: Darrell on May 07, 2011, 09:15:41 PM
New performance cam installed today and electronic ignition re-visited ::)

Might be back to points soon but willing to give it another go

Bumbers to be lightened and re-fitted tomorrow. The 80's aircooled with plastic bumpers weigh, no jokes, about 10kg a piece! :$

Title: Re: the bug
Post by: Darrell on October 17, 2011, 08:37:02 AM
Conservatory work has started  :-
Title: Re: the bug
Post by: KAL SPL on October 17, 2011, 10:42:30 AM
I have very successfully converted mine to electronic ignition if you need any pointers.
Title: Re: the bug
Post by: GTMaster on October 17, 2011, 06:42:14 PM
Bumbers to be lightened and re-fitted tomorrow. The 80's aircooled with plastic bumpers weigh, no jokes, about 10kg a piece! :$

(I weighed the doors and they weighed around 15kg a piece if i remember correctly...probably because of the SIPS installed  :P)
Title: Re: the bug
Post by: Darrell on October 21, 2011, 05:34:11 PM
Yes the doors are heavy but think I'll keep the SIP bar in there just in case.

The significance of the Conservatory being started is that it is a huge extension onto the house that Gilly has been waiting for for some time, alas all work on the 126 has had to be put on hold, so much so that the 126 is now SORN,  >:( the first time in 4 years  >:(

Hey ho once this thing is up and done it'll be professional re-spray and some crazy stuff  ;D
Title: Re: the bug
Post by: Darrell on July 29, 2013, 04:41:30 PM
The two rear wheels that were put on temporary are off and two rims gone to powder coat wheel refurbishers.
Paint purchased for touch-ups to happen this weekend  ;D
Title: Re: the bug
Post by: Darrell on July 29, 2013, 08:15:38 PM
Front wing welded up
Title: Re: the bug
Post by: Darrell on July 30, 2013, 09:20:25 PM
Continued welding this evening. Right side is more or less done.
Still got to finnish off the left as I ran out of inspiration for welding upside  down.

Once done it's filler sand and paint then she's ready to rock on to Retro Rides  8)

Bought two new door cards in black. (My door cards were awful and mismatched)

Title: Re: the bug
Post by: Darrell on August 02, 2013, 10:45:43 PM
Engine removed tonite and engine bay rubbed down and panel wiped  :-
Title: Re: the bug
Post by: Pete126 on August 02, 2013, 11:10:21 PM
That's a bit Extreme to just clean the engine compartment :P
Title: Re: the bug
Post by: Darrell on August 03, 2013, 07:54:57 AM
Painting the engine bay  finally.  It's only taken how long to get round to it  :-X
Title: Re: the bug
Post by: Darrell on August 04, 2013, 07:50:44 PM
ENgine back in  :thumbup
Title: Re: the bug
Post by: Darrell on August 09, 2013, 10:25:13 AM
Oops family from France arrived. Last weekend and now I have to entertain! >:(
Wondering if I will make Retro rides, still have to paint all the rust repairs  :o
Title: Re: the bug
Post by: bis13 on August 09, 2013, 09:03:49 PM
Mon Dieu quelle cauchemar!!
Title: Re: the bug
Post by: Pete126 on August 09, 2013, 09:31:01 PM
Mon Dieu quelle cauchemar!!

"Oh my god what a nightmare"

Just get some paint/primer slapped on ;D You'll be going so fast up the hill we won't see the indiscretions :P
Title: Re: the bug
Post by: Darrell on August 10, 2013, 10:02:11 PM
I have an ace up my sleeve.  Got wed thurs and friday off work :)