Club126UK

Fiat 126 Chat => Fiat 126 Chat => Topic started by: The Doctor on December 04, 2005, 01:38:28 PM

Title: bumpers
Post by: The Doctor on December 04, 2005, 01:38:28 PM
Hi everyone
does anyone know why my a/c 1990 has 'short' bumpers, i.e. do not reach right round to the arches, back and front? Black plastic, lights built in etc, but some around here have a deeper and longer bumper than mine.  :?:  :smt006
Title: bumpers
Post by: Chris Lakin on December 04, 2005, 01:53:22 PM
these bumpers sound like they are from a de ville or brown, they had the smaller bumpers, on the wings is there a hole showing? on each side wher ethe bumper doesnt meet to cover it??

i thought you had an FSM, if so maybe somone has had a knock, so put new bumpers on, (which should of bene the later FSM one)

regards

Chris
Title: bumpers
Post by: Chris Lakin on December 04, 2005, 01:57:55 PM
hi again Graham just had a look at pics of your FSM you sent me


(http://www.fiat126.co.uk/images/RE4.JPG)



yes i was right, somebody has put the wrong bumpers on!  can you see the small bit of metal which protrudes? that where the large FSM bumpers clips onto to meet the arches, i hope this helps m8, is it the front bumper too?

regards

Chris
Title: bumpers
Post by: The Doctor on December 04, 2005, 05:54:32 PM
Hi Chris
thought so!  everyone I see has the bigger bumpers, so I will try and get some.  My neighbour has exactly the same car as me, but it has been sitting in his gardenfor a year, and now it is under snow.  No way to treat a 126, eh? Maybe I can raid his for these bumpers :?:  :?:
thanks M8 and see you soon
Graham
Title: bumpers
Post by: fiatfsm on December 04, 2005, 06:46:02 PM
Careful Chris, dont forget Poland has been making the 126 since the 1970s, all their cars are really FSMs. His car is a 650E, which is what they call our FSM, CONFUSING EH? Anyway, many 126s in Poland/Czech/Hungary etc have variations on the bumpers, Im guessing it is spec differences etc, so he may well have the right bumpers but the factory only made the wing pressings for the larger bumpers. I cant see the holes drilled in the wing for the plastic bracket either... BTW fab FSM mudflaps!
Title: bumpers
Post by: The Doctor on December 05, 2005, 06:22:42 PM
glad you like the mudflaps, my horn push in the middle of the steering wheel is also original FSM. (I thought you all had these flaps :?: )
Maybe the bumpers are original, they certainly don't look as if they were replaced recently.  Still, I prefer the bigger ones, so may try to change them.
thanks for all your help and info, a great site :!:  :!:  :!:
Graham
Title: bumpers
Post by: Chris Lakin on December 05, 2005, 06:59:50 PM
yes your right about that Barry, but they must be late FSM bigger bumpers?? they wouldnt of used that penl with the attatcment protruding like that other wise, im certain the wrong bumpers are on! what do you think?

would be good to get some mudflaps over here, but i would prefer to attatch them like barry has rather than, drill into metal body work

regards

Chris
Title: bumpers
Post by: fiatfsm on December 09, 2005, 04:12:52 PM
OK, your car has the right bumpers, been to Budapest this week... lots of 126s there and I have never noticed this before but all the 650Es seem to have the small bumpers and our FSM wings. So the pressings in the wings do show!! Some have no holes drilled like the doctors car but most have small rubber or plastic grommets placed over the holes. The larger bumpered cars seem fairly scarce there and generally seem a state, so Im guessing these small bumpers are on later 126s? Saw no very late cars like Pauls Harbinsons though.
Title: bumpers
Post by: Chris Lakin on December 09, 2005, 05:41:05 PM
thats fantastic Barry, good job you corrected me  :lol:  i nearly told Graham to butcher his current bumpers for larger FSM ones!!  :eek:

The hungarian club seems to have a good following from what ive seen on their site.

Barry, quick question for you where did you get the engine air covers from? 126dave has been asking about them. I would like some myself too.
i seemt o remember you telling me yous got them in poland??

regards

Chris
Title: bumpers
Post by: The Doctor on December 09, 2005, 07:05:34 PM
Thanks for assuring me that my car has not been 'butchered'! I do have the small holes but they are covered by rubber grommets. (My car is 1990). Chris, are you talking about the air covers as in the picture of my car above? If so, they are easily bought over here and cost, if my memory serves my right, about £1.50 a set in your money.   :?:
Title: bumpers
Post by: Chris Lakin on December 09, 2005, 07:22:16 PM
hi Graham, Barry is the bloke if you want to know history and model variations!! so we are lucky to have him in the club!

Graham i cant belive they are £1.50!!!!! if i sent you the money for them + postage cost and any other costs could you send me some? no wirres if you dont, but you cant get them here, so it will be nice to have some, also have you ever seen those rubber surrounds which go round the head lights? you can get peaked version of these too. Barry and myself would like some of those.

i think they would sell well one ebay here too!!

im pleased we sorted your bumper query!

regards

Chris
Title: bumpers
Post by: fiatfsm on December 10, 2005, 10:51:47 AM
Glad to be of help! Got my engine covers in Poland and yes, they were around £1.50!
Title: bumpers
Post by: The Doctor on December 10, 2005, 02:01:08 PM
Hi Chris, and everyone else
many thanks to all for the bumper problem - must say I still like the bigger ones :!:
regarding the covers; they come with fiat 126 stamped on them, fasten by way of a simple screw and washer system, and are packed in pairs. No problem to get them, so why don't I buy a few sets, send them all to you, Chris, and then it would be easier to send them out to UK members from over there :?:  If that sounds good, I will buy them first and then send a receipt  etc. and we can sort the mazooma out later :?:  Let me know.
thanks again everyone
Graham
Title: Going the other direction
Post by: Sam on January 18, 2006, 09:21:26 PM
Has any one ever tried putting the shorter bumpers on a car with the longer wrap around type?  The plastic cover on my front bumper cracked in a freak towing accident and I have purchased some chrome replacements since they were cheaper than the plastic covers.  But, they are the short version.  I was wondering if anyone had ever done this and whether the project turned out OK.  I was going to experiment in the spring.
Title: Bumper's
Post by: paul harbinson. on January 19, 2006, 07:53:48 AM
Sam,I fitted chrome bumpers to my old fsm they look great with them the only thing is you need the proper bracket's and bolt's for them (unless you alresdy have them).There will be wee holes left behind at the side's where the big bumper's fit I just fitted gromet's in the hole's,you don't see them :D unless your an absolute nerd and go looking for them and if anyone doe's hit them a boot in the arse :lol:
Title: bumpers
Post by: Sam on January 19, 2006, 07:15:42 PM
Thanks paul.  I was assured, in very halting english, that these aftermarket products would bolt on without any problem.  I have a parts store near Koln that I visit every couple months so I'll have to check with them and see if they have  the proper brackets and of course the grommets too.
Title: Bumpers.
Post by: paul harbinson. on January 20, 2006, 07:40:51 AM
Glad to be of help mate.Any motor factors will stock gromet's of various size's,if you e-mail Chris Lakin he might be able to send you pic's of my old fsm so you can judge for yourself what a late car look's like with chrome :D ,cheer's Paul.
Title: bumpers
Post by: Chris Lakin on January 20, 2006, 10:29:50 AM
yes i was just about to say, the chrome bumpers on Pauls looked fab, i will dig that pic out Paul and get it scanned in.

well with regard to the mounting bits sticking out and the need to block them up, isnt really and issue. Like Graham and Barry pointed out a few weeks back, some of 126's for the czech market had the smaller plastic bumpers, when the moulds were inteneded to fit the bigger bumpers on.

regards

Chris
Title: bumpers
Post by: paul harbinson. on January 24, 2006, 11:04:59 AM
Sam how much were your aftermarket chrome bumper's?
Title: bumpers
Post by: Sam on January 27, 2006, 02:07:55 PM
I think at the time, they were 30 euro.  The quality is questionable, which may account for the price, (low for over here) so im coating them with some clear coat.