Club126UK

Fiat 126 Chat => Fiat 126 Mechanical Problem Solving => Topic started by: Jota69 on May 23, 2010, 02:56:45 PM

Title: Windshiel washer help
Post by: Jota69 on May 23, 2010, 02:56:45 PM
I intalled a Bis windshield washer bottle with electric pump onto my 126 that had the mechnical pump, I installed everything but when I activate it I can hear the pump working but no water comes out of the washer jets. I tried reversing the cables on the pump but I get the same results.
I don't know what coul be the problem
Title: Re: Windshiel washer help
Post by: smallcox on May 23, 2010, 03:37:32 PM
Hi Jota69,

I fitted this to my fiat and found that you  may need to blow into the water container with the pump running just to get rid of the air lock present. I take it its not blocked.

failing this maybe the motor to pump drive is u/s

Hope this helps

Steve
Title: Re: Windshiel washer help
Post by: Jota69 on May 23, 2010, 03:57:38 PM
I will try to blow into the bottle to see if that works
Title: Re: Windshiel washer help
Post by: Jota69 on May 23, 2010, 04:45:09 PM
I blew inside the bottle whith the pump running but got same results, nothing comes out. Could it be that I got a bad pump?
I blew air inside the hose and air comes out of the jets, I ordered brand new hoses and washer jets to redo the whole system anyway so i hope when that comes in I can intall everythimg and that will solve my problem.

The pump is brand new and when I activate it I can hear in working, could it just be making noise but not pumping anything?
Title: Re: Windshiel washer help
Post by: smallcox on May 23, 2010, 05:08:10 PM
Hi,

 you can remove the outlet hose from the pump and try it again to see if water is coming out at force, but if like what you say you can blow air through the pipe and out the jets then replacing these pipes will not solve the problem.

still say faulty pump :(

hit the pump while it is running

Steve
Title: Re: Windshiel washer help
Post by: bis13 on May 23, 2010, 06:16:44 PM
is the pump wired up properly? just a thought.
Title: Re: Windshiel washer help
Post by: Jota69 on May 23, 2010, 07:41:07 PM
is the pump wired up properly? just a thought.


There are just 2 wires on the pump, one ground and the other power comming from the switch I installed, I switch the wires around and it still doesnt shoot water out of the jets.
Title: Re: Windshiel washer help
Post by: Jota69 on May 23, 2010, 07:43:45 PM
Hi,

 you can remove the outlet hose from the pump and try it again to see if water is coming out at force, but if like what you say you can blow air through the pipe and out the jets then replacing these pipes will not solve the problem.

still say faulty pump :(

hit the pump while it is running

Steve

The pump is brand new and it makes noise when I hit the switch, you really think I have a faulty pump?
Title: Re: Windshiel washer help
Post by: smallcox on May 23, 2010, 07:59:48 PM
Hi again,

ok, remove the pump from the bottle and check the inlet on the pump for blockage (may be packaging blanking plug or paper in there at chance). as its a new pump can you take it back as this does sound faulty, if not you can try and strip it down if there are screws in it and not a pump that is pressed together,

still sound like a u/s pump

Steve ::)
Title: Re: Windshiel washer help
Post by: Jota69 on May 23, 2010, 09:36:49 PM
I bought the pump from ebay a couple of months ago so I cant send it back now, I will take the pump out and check for blockage. If its not blocked I guess I will have to buy a new pump
Title: Re: Windshiel washer help
Post by: smallcox on May 23, 2010, 10:12:27 PM
Hi,

If it is shaged let me know, i Had one the other day and your welcome to it, its the bis one which plugs into the bottom off the bag.
I'll test it before sending it to you.

Steve
Title: Re: Windshiel washer help
Post by: Jota69 on May 24, 2010, 07:13:44 AM
Ok sounds good, I might just gotten a defective pump