Club126UK

Fiat 126 Chat => Tuning & Customising 126 Models => Topic started by: Darrell on May 17, 2010, 04:54:20 PM

Title: vizza motorsport
Post by: Darrell on May 17, 2010, 04:54:20 PM

http://www.vizza-motorsport.de/595-695-126-en.htm

Title: Re: vizza motorsport
Post by: gsxr126 on May 18, 2010, 03:48:48 AM

Very cool , Darrell.

I have sent an enquiry on costs. If it works out ok i'll order.

Title: Re: vizza motorsport
Post by: Darrell on May 18, 2010, 08:52:54 AM

I've done the same for the chain cover with oil cooler bits and the long flat oil cooler  :oops:

Title: Re: vizza motorsport
Post by: Darrell on May 18, 2010, 09:43:12 AM

22M010 = 235 Euros
22M008 = 340 Euros
 
 :o

Title: Re: vizza motorsport
Post by: thepuddlejumper on May 18, 2010, 01:24:33 PM

I welded a standard alloy take off to the casing, drilled a hole through to the oil pump, tapped the end of the oil pump shaft.  Cost £10 to have the welding done, not very good at welding alluminium.  The return is the allen bolt just above and to the right of the oil pump. Not fitted yet as need to find a good place to fit the cooler and filter.  Will post some photographs later.

Ralph

Title: Re: vizza motorsport
Post by: thepuddlejumper on May 18, 2010, 10:15:23 PM

Photo's of oil take off with altered oil pump.

Ralph

Title: Re: vizza motorsport
Post by: Darrell on May 18, 2010, 10:35:58 PM

when are you going to try it?

I'll have mine in pieces this weekend so will be looking at that with big eyes