Club126UK
Fiat 126 Chat => Fiat 126 Chat => Topic started by: Alex on March 19, 2010, 03:20:09 PM
-
Hello
got my work cut out this saturday, gonna give the fiat a valet, but have read some differing comments regarding wax/T-cut
anybody have a preference or experience?
any tips on how to approach the paint work?
cheers in advance
Alex
-
T cut, then few coats of MER or autoglym resin polish, for some reason one works better than others on different cars .
Steve
-
I found Turtle Wax to be good.
-
It really depends on the condition of your paintwork. If it is a bit faded, use T-cut to bring out the shine (do not allow the stuff to dry), then apply normal wax afterwards. The T-cut has some rubbing compound in it, so you may take a layer of paint off, so do not use if the paintwork is in relatively good condition. If the paintwork is fine, just use non-metallic wax if applicable. Apply ArmorAll to the plastic bumpers (if you have a Bis) and side mouldings/panels. There are all lot of good car waxes out there. I like the Turtle Wax Classic but other brands are good as well. The new Turtle Wax Ice has had good reviews, for its ease of application, lasting shine and does not leave a powdery residue. It is all a matter of preference.
-
the turtle wax ice is realy good we got a bottle and its pritty good and you can use it on ur plastics and its maked them look like new well mine needs a t-cut nd then am going to use the turtle wax ice to polish it, its so easy to use aswell evan my sister can use it nd well shes rubbish at everything lol
-
I use the autoglym range, works a treat but it is a bit pricey! Personal pref really. You can get Autoglym paint renovator in a pink bottle, it is like T-Cut as it removes a tiny amount of paint but I would say it is excellent and much better than T-Cut!
-
i use this to keep the lustre on my cars matt paint...
http://www.swissvax.co.uk/products/wax-products.asp
-
Not strictly relevant but maybe helpful, if your paintwork is badly faded cutting compounds like T-Cut will bring the colour back up but due to the abrasive nature of the polish there will be swirl marks reflecting in the sunlight, so it's best to have 2 or 3 grades of polish from coarse to ultra-fine so you can really build up the shine! Then wax after to seal paint!
Also it is possible to sand out light scratches which wont polish out, using P2000 grade wet or dry paper (use wet) and polish back up with a coarse compound! just gotta be careful you dont go through to the primer underneath!
use circular motions to polish and different clean cloths for each grade of polish, and those microfibre cloths/towels are amazing for cleaning off polish! I work in a bodyshop so i know a lot about this!
hard work doing it by hand tho, lucky we own such tiny cars :D
-
Mick, now i know how you get your panels looking so good. F*****K 1600 pounds for 200ml