Club126UK
Fiat 126 Chat => Fiat 126 Mechanical Problem Solving => Topic started by: Alex on March 05, 2010, 12:50:48 PM
-
Hello
wondered if anyone can offer me some quick advice,
the little car has its MOT tomorrow, i'm 50/50 if it will pass and need some clarification about certain items on the car.
1, bump stops! are they needed to pass the MOT
2, i need a new front bulb, what sort do i ask for in the motor factors?
cheers in advance
Alex
-
I'm pretty sure bump stops are needed and can't be broken/brittle or severly cracked. As for front bulbs, both have to be the same colour and type. It depends on what is on the headlamp glass. If it has a H on it then it has halogen bulbs (though you could replace them with the types that were in it as well.) The bulbs on mine are the old regular bulbs.
-
Take the bulb with you, they are very common and will be stocked by your local motor factor
-
HI
I don't know where you are in Essex. In Great Dunmow in Station road is a No pass no fee station. Very good, very 'understanding' ;D. Very Helpful :oops:
-
Did it pass Alex???
-
alas no pass for me!!!!
the only major things were alittle bit of welding, and the brakes are all unbalanced,
getting quote today for work.
fingers crossed end of the week it will be on the road
-
Ok mate , good luck , i,m using mine now .
sold the seicento so the 126 is my new daily driver ..lol
-
got my quotes through
100 for the welding,not so bad i thought
but the price for the brakes is crazy,
heres what the brakes failed on
nearside front brake juddering severely
nearside rear brake application uneven
front brakes imbalanced
i'd of thought even if they replaced with new drums would only be about 150 including labour!
his price is 4-500 quid if he does the welding as well!!!!
any advice is welcomed
also the carb needs tuning
cheers
Alex
-
You might as well do a disc brake conversion , about £150- £175 if you use 2nd hand calipers .
Steve
-
DIY its the easiest way has the car been standing for a long period as they hate sitting around doing nothing? the brakes tend to seize up whip off the wheels and check the condition of the brake components for wear and leakage either way it aint rocket science here and doing it yourself will save you bucks and teach you loads.
-
got my quotes through
100 for the welding,not so bad i thought
but the price for the brakes is crazy,
heres what the brakes failed on
nearside front brake juddering severely
nearside rear brake application uneven
front brakes imbalanced
i'd of thought even if they replaced with new drums would only be about 150 including labour!
his price is 4-500 quid if he does the welding as well!!!!
any advice is welcomed
also the carb needs tuning
cheers
Alex
I think there having a laaargh :) Is that a main dealer or an independant garage ??? Try another garage [-/
As bis13 said nothing is rocket science on a 126 and where here to help you if you get stuck.
-
the main problem i have is that the car is 30 miles away from where i live,
also i did replace the master cylinder checked all the brakes and drums they all looked fine, my old man reckons it just needs driving about more, and a little balancing,
i have now spoken to the guy further and he agrees that it probably just needs a little balancing and a lot of driving, he said his quote was based on the worst case scenario, so i'm feeling a little better now!
i will do the Disc brake mod once the car is outside my house, that way i can work on it more than one morning a week.
cheers for the advice though and i'll keep you posted! welding starts on monday
Alex
-
Replace the nearside drum, for some reason they go a bit oval and cause the juddering.
From what I see all the issues/descriptions are just a result of the juddering.
Then take it out and hurt those brakes! :oops: