Club126UK

Fiat 126 Chat => Fiat 126 Mechanical Problem Solving => Topic started by: jon.hunt on January 27, 2010, 12:53:09 PM

Title: Air Cooler with a Panda 30 Head
Post by: jon.hunt on January 27, 2010, 12:53:09 PM
Hi All,
          I Am having great difficulty getting the Heater to work with a Panda 30 Head!!!!  I tried butchering the ordinary  thermostat housing to fit but I could not get it to work as the Flap hit the Didtributor. So I ordered at Great expense a Genuine Panda 30 Thermostat shroud which Fits great on the Head, But there is now no covering over the Cylinders so all the Hot air just Blows away, I assume there must be a Covering Here on a Panda 30?  If so what part do I order now Please,  ANY Help Greatly appreciated by anyone who has fitted a Panda 30 Head Please.
                                   Jon.
Title: Re: Air Cooler with a Panda 30 Head
Post by: dajwid on January 27, 2010, 08:50:46 PM
All the panda 30 conversions I have seen have had no heating.

Title: Re: Air Cooler with a Panda 30 Head
Post by: thepuddlejumper on January 27, 2010, 09:39:32 PM
John I cut the panda head to fit the 126 tinware, I have seen panda heads with modified panda heater box.

Ralph
Title: Re: Air Cooler with a Panda 30 Head
Post by: thepuddlejumper on January 27, 2010, 09:59:39 PM
John found this photo of modified heater box
Title: Re: Air Cooler with a Panda 30 Head
Post by: thepuddlejumper on January 27, 2010, 10:01:06 PM
and another view
Title: Re: Air Cooler with a Panda 30 Head
Post by: Tomasz on January 30, 2010, 10:07:58 AM
I modified the original but my welding was awful back then and it ending up shaking itself to bits.  Worked while it lasted though! Might have a picture somewhere.
Title: Re: Air Cooler with a Panda 30 Head
Post by: Alfons1972 on March 12, 2010, 05:43:37 PM
the engine in the picture above is not a modified Panda 30 but is a complete german Fiat-126-engine...  ;D
(look at the carburator)

just look in ebay.de, there will be such housings from time to time...
Title: Re: Air Cooler with a Panda 30 Head
Post by: Alfons1972 on March 16, 2010, 06:38:15 PM
now I know what you need:

(http://img7.myimg.de/DSCN5046b4081_thumb.jpg) (http://www.myimg.de/?img=DSCN5046b4081.jpg)

that's a pic of a Panda30-engine. As far as I know, there is a little screw in the cylinder to fix that tin.
The problem is that you probably will not get those parts... so you will have to produce it yourself...