Club126UK

Fiat 126 Chat => Fiat 126 Mechanical Problem Solving => Topic started by: bobblehead on January 20, 2010, 04:19:07 PM

Title: melted terminal ??
Post by: bobblehead on January 20, 2010, 04:19:07 PM
(http://media6.dropshots.com/photos/278978/20100120/171906.jpg) (http://www.dropshots.com/c90#date/2010-01-20/17:19:06)

would that being melted, result in my rear passenger and my reverse light not work ??

im hoping one of you lot can help ???


Title: Re: melted terminal ??
Post by: GTMaster on January 20, 2010, 05:10:13 PM
I'm not sure where that terminal could be (looks like it's under the muffler?) but something probably isn't working if it looks like that. Maybe one of the switches short circuited or it melted from touching the muffler. The brake light terminal is behind the light cluster, the reverse light terminal i think goes out on the alternator side under the bumper along with the number plate light wires (not sure though, could be on the fog light side). That's at least what i think...
Title: Re: melted terminal ??
Post by: ciaoflyer on January 20, 2010, 05:16:08 PM
I think the exhaust has melted it!
Title: Re: melted terminal ??
Post by: bobblehead on January 20, 2010, 05:21:58 PM
the zorst has melted it ..

so its not the cause for ..

no passenger brake light , no rear light that side when lights on ... or no reverse light ???


bugger ? can anyone help ?
Title: Re: melted terminal ??
Post by: GTMaster on January 20, 2010, 05:42:14 PM
I just had a look at mine: the terminal that goes to the light cluster has four wires and is wider than the one in the picture, which looks like the terminal for the number plate light on mine. If you've checked the bulbs then try and see if there's power at the terminal, could be a faulty fuse or sometimes it just needs to be jiggled in its socket.
The terminal in the picture could be for your reverse light, which would explain why it might not be working...
Title: Re: melted terminal ??
Post by: bobblehead on January 20, 2010, 06:07:24 PM
will have a look tomorrow, or in a bit if i can find a torch  , i checked all fuses too ???

weird

Title: Re: melted terminal ??
Post by: bobblehead on January 21, 2010, 01:46:44 PM
managed to sort rear passenger brake light and light, it was the bulb holder and the bulb was loose in it .. anyway i can make it tighter fit? so it doesnt shake loose ?

as for the reverse light???  checked bulb, and terminal cleaned etc , and still nowt?

Title: Re: melted terminal ??
Post by: GTMaster on January 21, 2010, 06:14:31 PM
If your reverse light still doesn't work then it may be a faulty reverse light switch. As for the bulb holder i don't know, the bulbs have these bumps on the side so they should lock into the holder....
Title: Re: melted terminal ??
Post by: bobblehead on January 21, 2010, 07:26:52 PM
thanks dude,  i will look into it, its been motd last month or so and it was working then?