Club126UK
Fiat 126 Chat => Fiat 126 Mechanical Problem Solving => Topic started by: bobblehead on December 22, 2009, 12:13:22 PM
-
hi there , i got my h reg 1990 bis back, and wated to swop to my cinq alloys , however with the standard bolts off my 126 i only get 4 or 5 full turns ???
i was told 8 and id be ok ?
what do i need to do now please? ..
ive got perished tires on standard wheels too and didnt want to risk a blow out esp in these weather conditions .
also anyone got another square vent lying around ? not bothered what its off, will make it fit . slice and dice if need be ?
im in eastwood nottingham ..
ive got 2 whole front panels off a fiat 126 , genuine parts if there is any deals to be donw as i wont be needing them ? one painted and one not , also have a wing or 2 i think ?
please message if you can atall help
situated in eastwood nottingham
thsank to thomasz and emma :P
-
Measure the bolts from the bottom of the taper to the end of the thread (shown as 's' or shank on this auction - http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150361099659). Whatever length that is, add about 3-5mm for the extra turns you need. Remember when looking that you need M12x1.5 not the M12x1.25 shown in that auction, I only used that as an example so you'd know what to measure ;)
-
Also, I might be interested in the unpainted front panel but it'll have to wait until the new year when I find a job </
-
will these be suitable ?
ebay item : 220530204528
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=220530204528
cant believe they only come in 20 ?? i only need 8 ? or is it good to have spares? never had alloys before
-
Why do you need 8? Surely you'd need at least 16 for 4 x 4-stud wheels?
Those are the right kind anyway, just make sure you order the right length [-/
-
grade 4 gcse maths mate hehe :)
i see what you mean ?? , f**K me ... stoopid sometimes
-
also i just thought i can order a longer thread, but without it being a overall longer bolt im knackered ????
as once seated bolt wont go further??
any idea what total gross length the bolt needs to be so it doesnt rub on the shoes??
i want to run cinq alloys on a standard 1990 h reg bis ...