Club126UK
Fiat 126 Chat => Fiat 126 Mechanical Problem Solving => Topic started by: ciaoflyer on November 08, 2009, 05:38:34 PM
-
Hi
Fitted Towbar to Bis, looks good will post some pics soon! However, had to undo the pivot bolt on the suspension to fit the bar to. I have looked in the manual and it says it needs to be tightened to 7.8danm but what is this in foot pounds?
I have done it up as tight as I can by hand and it is also a nylock nut, is there any chance it could come off and if so what would happen?
Just thought I would ask b4 I go racing round the country side! :)
-
i know 5lb ft equals 7 nm whats the danm bit? doh!!!
-
Found This.
8 daNm = 80 Nm
80 Nm x 1 ft-lbf/1.355818 Nm = 59 ft-lbf
-
Thanks guys, you were about spot on Pete Haynes manual for aircooled states 58 Foot pounds! Anyway got another problem now :(
When pulling off in first gear the engine wobbles so much that it hits the towbar with some loud bangs! Now my local Mech says that the gearbox mounts and the engine mounts need replacing to rectify the problem, He looked at the gearbox mounts and they have slipped out to the left! Do you guys think that this is the problem?
Thanks in advance!