Club126UK
Fiat 126 Chat => Fiat 126 Mechanical Problem Solving => Topic started by: Darrell on September 15, 2009, 10:11:08 PM
-
After months of faithfull reliable service, my bug has a rumbling altenaror bearing :oops:
At first I thought it was my thrust bearing as the thrust bearing screeched like crazy when I left my foot on the clutch alot. but I removed the belt and found it was the altenator bearing.
Ordered a new altenator on e bay, pulled the engine out, replaced thrust bearing and altenator so we're back to normal again...till MOT which is not too far away....
Fitted the front seats out of a Seicento and it is a thousand times more comfortable!
The wife is even happy and her seat was ok, mine had a broken spring!!
The rears from the Seicento are completely the wrong shape...and split so going to have to figure something out there...
I can see some artistic modification with the sewing machine coming.
Only one problem though is the seat belt will not come forward unless the door is open but the kneeling action of the Seicento seats is great and they are a little higher.
I had to cut the original track off and put a new/ addition to the reinforcing bar across the outer side as the sei track is a little wider.
Next is the disc breaks as I got some callipers and discs so cross fingers I can make it work. [-/
-
Are the seat runners/spacing the same in the cinq/sei as they are in the 500/126? My old plywood subframes/adapter plates that I made have broken and I need to find a way to make my cobra seats fit again!
Dom