Club126UK
Fiat 126 Chat => Your Restorations => Topic started by: bardy on July 27, 2009, 02:20:46 PM
-
hey to all.
Me and my dad started to restore a blue 1991 fiat 126 BIS, this will be my first car when completed.
So far we have completed:
The front suspension and the rear suspension we have greased the stub axles as much as we could.
We have droped the engine out and gear box to strip them and change as many gaskets as we can get hold of.
We then found a problem with the fuel tank, it had rusted away at the top, so my dad emptyed it and shot blasted all the area where it was rusted away then he took it to hs work and the welder at his work welded a new peice of metal on top of it and then i red oxided it and painted it black.
what we still have to do:
Change all the brake lines and master cylinder.
Change all the cables( handbrake, clutch, etc)
Respray it, i do like the ford RS blue colour so i think am going to spray it that colour if av got the money for it.
Change the sound damping material form stock to second skin luxury liner sound deading material from www.caraudiodirect.co.uk
Put a 10 disc cd changer in under the driver' seat( if it fits) the put 2 speakers in the Parcel shelf from a cinq
Put a few extra gauges in ( ones a clock so ino if am guna be late or not)
more pictures to come when i get hold of mi dads phone for the pictures he has took
-
looks like youre doing a thorough job!!
keep the pics coming, its great youre doing all the painting and preserving now while you can get to everything.
really good.
Regards
Chris
-
It's great when there's more than one of you to work on a project. extra hands and extra skills. I dont think me mum mould be much use, she only found out what hazard lights where when i showed her on saturday and me dad's in london so he'll not be much help either. bless their little cotton socks, lol.
Oh god, i'm being miserable again aren't I.
Anyway good luck, and make sure you have something well roadworthy before you stick a stereo in.
And last thing, if necessary take pictures of anything you're taking apart and's complicated. when i rebuilt my bike i had a minor incident with the cranks which later led to dodgy knee.
-
well thats what were doing if sumthings complicated we take bout 4 sets of photos 2 on my fone then 2 on mi dads so nd well i am getting on road first then music after but am putting one in i was thinking of putting a flip down dvd in thourth it would be kool when we go for these trips sit out back of car watching tv or dvds or blasting music vids out of lol
-
more pictures for you lot of what av dun so far
-
As the 126 has the front boot opening up from the back you could put a projector in the headlining by the windscreen and beam it out to the underside of the panel. Stick a thin sheet of mdf (etc) to it and you've got a nice flat screen :D.
nice to see everything being done properly. keep up the good work.
-
dint think of that lol nd well my dad dunt do things by half so its gota be dun properly evan if i made a parcel shelf it will be made like it wa bought off the shelf lol
-
theres sum more pics
-
more pics of front leaf and stub
-
What we have completed since last reply:
completed the brakes and brake lines at weekend
changed all the cables to new ones ( handbrake, clutch, etc)
what we still have to do:
Strip engine and change all the gaskets( which we have got but we got to change a turbo on a bora for a friend so its on hold till the weekend)
Remove the drivers side sill and rear wheel arch which we got from bevers auto panels in barnsley for 38 pound
Respray it, i do like the ford RS blue colour so i think am going to spray it that colour if av got the money for it.
Change the sound damping material form stock to second skin luxury liner sound deading material from www.caraudiodirect.co.uk
Put a 10 disc cd changer in under the driver' seat( if it fits) the put 2 speakers in the Parcel shelf from a cinq
Put a few extra gauges in ( ones a clock so ino if am guna be late or not)
pics to come when i get round to doing them
-
well another update me and my dad has got the head off and we are puzzled why the cyclinders go up and down at the same time but were changing the head gasket when i scrape whats left on the engine, then were changing it and the hopefully put it back on and then clean it all and put it back in engine after i have sprayed my exhaust, then its to do the body panels then hopefully respray it.
-
get some more pics for us!
pleased its all going well, replace witha coper head gasket, tehy dont split so easily (expand with the heat)
Regards
Chris
-
well we started on the body today and what horra we av found, we found about 4 or 5 holes in the floor and then my sills just fell to bits and my rear arch is falling apart too worse than we thort got pics on mi fone but carnt find cable so this is setting me and my back but pics will come as soom as i find the cable
-
few more pics for you all
-
well another update engine is complete valves sit good now and changed the gaskets and is now waiting to go back into the car, started on gear box but dads took it to work to get it steam cleaned then al be painting it tomorrow hopefully nd then its onto body work then then it should pass its M.O.T with flying colours(hopefully) then on with the sterio nd speakers then were complted
-
Looks like you guys are doing a very good job there [-/
-
were trying to do best we can well hopefully be spraying the gear box tomrrow then just got a few bits to do on it then its put it together nd put it in car or get body dunthen put it in then put fuel tank in nd then fill it with oil nd fuel nd then its moment of truth
-
another update for you all if ur watching this restoration
finished and painted gear box so thats dun now were putting things back on it then i think were guna try do the body of the car then hopefully its spray it then get it M.O.T it hope it will pass
-
well another update for you all
engine nd gear box is COMPLTED WOOO!!! finaly
put it all together only thing i need to do is put fuel pump on when i get my new spacer the put fuel lines on then should be complted o h put oil in gear box nd engine
tomorrows plans:
fill holes up
put new sill on
al post tomorrow to tell you howw it all gose
-
another update
sill's nd holes filled up nar just needs painting blue
mondays:
put engine in then other jobs ew can find
-
another update:
BODY WORK COMPLETED JUST NEEDS PAINTING BLUE
Things to do:
put engine nd gear box back in
Sort interior out
Put cd changer in plus speakers when i buy em
take it to M.O.T centre nd get it M.O.Td
-
another up date for people out there
THE CAR HAS A HEART AND IT BEAT PERFECTLY ( started first time)
got engine in nd had it running now were changing oil so we'll be putting fresh oil in for when we take it out on road. should be M.O.T'd by end of this month or earlyer depending on mother nature
-
well had car running up nd down drive today works ok hard to get reveres tho but it was hard before we took it out. Now we ant got any break lights but am guna have a look.
tomorrows agenda is:
paint floor
paint under the car
wash seats nd carpets
wash all the plastics thats going in car
-
another up-date for you all
carbs not leaking nar nd its running as sweet as a nut well its running alot betta nd alot smother nd alot quiter than it was when it came out
now its time to put everything back in
-
Sounds like it's going really well and it's good to see everything done so thorough!
have a look at this site for speaker enclosures:
http://images.google.co.uk/imgres?imgurl=http://www.team-bhp.com/forum/iipcache/109237.jpg&imgrefurl=http://www.team-bhp.com/forum/sound-off-show-off/32381-my-first-fiberglass-install.html&usg=__duuatpUcI2Gi33YxyZwoTt9quOc=&h=640&w=480&sz=45&hl=en&start=11&um=1&tbnid=UwGBUQRnAdHW5M:&tbnh=137&tbnw=103&prev=/images%3Fq%3Dfiberglass%2Bspeaker%2Bmount%26hl%3Den%26client%3Dfirefox-a%26rls%3Dorg.mozilla:en-GB:official%26sa%3DN%26um%3D1
explains how to make a raised door card (the technique is the same for parcel shelf) coat in fiber glass and then cover.
I done this a few years ago in my 500. ( I'll take some photos tomorrow) 2 speakers for the parcel shelf, 2 in the rear trim cards, couple that with a descent stereo and you're off to a good start. Be aware that a cd changer may be prone to skipping due to the car being so light over bumps, I run an mp3 player plugged into the head unit so I've got all the songs I'll ever need!
-
hey sorry for taking so long to reply dint no youd sed owt cos i aint been on in along time lol busy on car nd nar college :cry: well i was going to put it on sum foam or sumthing like that, and well i only got 2 speakers so far nd its a kenwood 10 disc but i want sum vibe edge 6.5 ich speakers for parcel shelf but well cars nearly ready for M.O.T, got paint for car exat same for the car from a firm in sheffield only got it cos one of mi dads bosses wife works for them so they made it lol so thats our next job what we still have to do:
left to do:
Respray it
Put all intior back in
Put a central locking sytem in (got it, we just need to put it in)
Put a 10 disc cd changer in some where ( a kenwood but ant a clue where tho yet)
buy a few more speakers 4 hopefully 2 in parcel shelf (got a ryt plan where to put 2 of emif they will fit)
make our own parcel shelf
Put a few extra gauges in (ones a clock so ino if am guna be late for collage)
M.O.T it
then learn to drive and pass mi test and then take it everywhere over country
-
well another update for you all
sorted carb works perfectooo!!
undercoated the sill and wing now just needs spraying
photos to come hopefully sprayed by tomorrow hopefully or nearly painted
-
well an update for you all
well sorted the engine cowlling out
painted my car just need buffing to make it all nice and shiny
Need to do:
fit interior
make parcel shelf
buy speakers and fit in parcel shelf
fit cd changer that cost me nothing wooo!!
empty drivers door of the glass (must have got smashed)
fit central locking kit
carnt think of owt else pics will come as soon as i can be botherd to do sum lol
-
hey to all whos reading it and one thing i have to say is i carnt belive theres been 850 odd people looked at this restoration, well pleased [-/
well we sorted the other rear wheel arch out had a bit of rust so we investigated it and we cut it out and put a plate in and then put sum filler on it, just needs rubbing down nar and then we should be fine (hopefully), well now we carnt get revers but i we changed the gear linkage (the hole unit) and we think it could be that so we putting the one we took out in so hopefully thats the folt, we need new gear box mounting now cos ours are making a lovly noise on tickover lol, so once we sorted them out, we should be fit for anything!! oo and after we sprayed the body
things to do still:
fit interior
make parcel shelf
fit cd changer and speakers
empty drivers door of glass and change door card
fit central locking kit
pictures to come am guna do a shed load tomorrow for you all out there
-
hey all little update for you all sprayed my rear wing blue now, fited my rear seat back in once mi dads finished painting car al get the rest of the intior back in then bleed front brakes again and were fitting the central locking kit while my dads trying to fix the passenger side lock but were trying to get it through M.O.T then get the rest in e.g parcel shelf, cd player, speakers
things to do still:
fit interior
make parcel shelf
fit cd changer and speakers
empty drivers door of glass and change door card
fit central locking kit
pictures to come am guna do a shed load when i rember for you all out there
-
hey all another update put the new gearbox monting on and now got all the gears woooo! lol put interior back in looks lovly and clean just got to put seats in and then fit the new rear fog light and the new revering light on well when they come threw post then fit the central locking then if am correctits ready for the M.O.T
-
Good luck on the MOT [-/
-
tar darrel its book in for satday morning so hopefully it passes i bluming hope so if it fails am guna cry
-
Main thing I found is jack it up and check for play in all the wheels.
If there is play in the front which is not the wheel bearings, it is the kingpins, and what I found with mine is pump some grease into them, often the play disappears after this.
It's good practice to pump some grease into the kingpins every month or so. If the play doesnt go away he might fail it.
Take it for a spin round somewhere quiet to check the brakes arent pulling, I found that a few very harsh stops tends to kindof get the brakes settled in. They say a harsh stop in reverse adjusts the brakes.
Take a socket to fit the lights with you with a wobbly extension as they're a sod to get to the bottom adjuster and have a good look at the lights and get the mechanism into your head as just tightening or loosening them without knowledge of what the specific bolt is doing often pops the little bolt out of the plastic clip.
From the sounds of it you've been through the rest of the car so it should be a doddle.
My MOT tester loves the little car and spends the whole test with a smile on his face which helps [-/
Anything else just dont worry about it, I think if they find something they stop looking for something :oops:
-
well we wa guna pump more grease in anyway to make sure its full to brim lol nd well we got a long drive so i can do the brake thing on drive nd then well propz take it out on a country road sumwhere we have adjusted lights but we shall to be sore nd well our mot ant seen it yet cos its frist time we had it on mot so it should pass i hope it dus anyway or it will pass on a stupied thing like a bulb
-
well T minus 2 days to M.O.T well replaced rear fog light its lovly nar just got the reveres light to do but doing that after test due to the fact that the one on works so its staying on. well it keeps poping out of reverse so well adjust it back abit nd see if that works.
-
its passed wooooo am happy very happy and got home nd then striped it to fit the isolater switch nd al do a pic one day when am not busy for you all its injenius where we put it i dunt think ull guess where it is tbh next thing to do is the radio
-
my car satday morning
-
well another update cars back in our garage got door off to do the central locking bit so we put car in garage again but its on hold since our 7 month old baby is in hospital so its on hold till she comes out so sooner the betta
-
All the very best wishes for the baby [-/
-
A big 'get well soon to your baby'
I found the long-term success of the central locking bit it to remover the door mechanisms and lube them thoroughly.
Also for some odd reason I havnt figured-out yet is they dont like it when the doors are adjusted in too close eg. being that the lock is under pressure sort of when the door is closed.
But then it seems to be only happening to my driver's door and in this weather, it'll stay like it is for a while :oops:
-
wellmy dad sez its not hard to get central locking bit in its the wires whats the hard bit nd to find a outer rubber casing to protect the wires, thats the only bit what my dads worried about realy every thing else is easy. My next stage after the central locking is the speakers nd Cd player, i think were changing the cd player to a single disc and then having sum 4 inch speakers at front nd 6x9 on parcel shelf or 2 sets of 6x9 at front nd back not sure yet. but i will get sum pictures once it decides to stop raining. we also have put a 3rd brake light in which took us all day saturday to do but we got it in nd works which i will take a picture of it for you all but once we dun them then its basicly waiting for me to have driving lessons nd pass
-
Having a loud radio/cd in a fiat is a good idea, as you need it coz they're so noisy at speed :oops:
I put the wires through one of those plastic wire tidy type things coz it's such a short distance the door closes down to.
I also did electric windows so there are many wires, plus the speakers.. :oops:
central locking actuator was placed about two inched away from the bottom of the door as it got in the way of the window mechanism anywhere else.
The electric windows came off a kit from e bay, so did the locking system which connects to the alarm, all as a kit.
It is supposed to have auto start for the engine and auto roll-up/roll down for the windows, havnt figured those out yet.
Also has a delay timer for interior light [-/
Imobiliser in the alarm too.
I found an after market centre brake light, was easy on the air cooled as the brake wires pass through the cab and there is an earth for the heated windows :oops:
-
ino thats why i want sum power full speakers lol. i want to put 2 pairs of 6x9s in 1 pair at front nd a pair in parcel shelf. but i think am going ot get 1 pair then get the other pair for the parcel shelf later when its we say its ready for the road, nd well for the intior light, the one we gots realy dim nd carnt see anything. am getting some of those day running lights and contecting it to the intior light so al see everything lol when i open door lol
-
sum pics for you alll
-
well a little update for you all cars nearly dun now got central locking in place just needs to be wired up and then we can try it. then its fit the speakers in the door then put cd player in nd then get sum 6x9s for the rear parcel shelf. then its fix the water leak i have on the gasket where the water pump is, oo and the leak on the rocker cover going stright ontop my nicly painted exhaust when dun them then should be good to go once i get insurance am be taking it out on the road guna be fun
-
well another update central locking dun just got to put drivers door back on when it decides to stop raining but it works when we put it onto battery but were changing the fuse to a 2 prong not the round ones so its easyer if the fuse gose cos al be carrying more of the 2 prong fuses. were changing the door cards to plain black due to the original ones are stained and ad rather keep the original due to were putting speakers in the doors nd they will look out of place due to changing the seat covers to blue and black seat covers another update soon and pics to come shortly
-
good to hear your still moving at a great pace!!
Have you got any pics of the central locking setup?
Cheers
Michael
-
not at the moment but i will try and do some when i get in from collage for you
-
a few pics for you
-
well little update not dun much on car but i been shopping and got sum bits and bobs well i got some drivng lamps and sum speakers for the home made parcelshelf, and a few other thing. i have an idea for the interior light, its abit rubbish, so am thinking of putting day running lamps and putting them in the gap above the doors and connect it to the wires on the original light
what you guys think, is it a good idea?
-
few pics of my inteior light idea
-
hey all you guys out there cars cumming along nicely, almost finished the speakers just got to hide the wire for the rear speakers and then wire up the front 2 speakers then find a place for my aireal then wire it up to the battery then fit the cd into place then its sorted
-
well a small update for you speakers fitted and are very loud put it on number 15 nd ur deff lol and cigertee lighter fitted and working we fitted one of the new interoir lights in nd works just need wireing up once we put the other one in on the other side then its fitting another speaker drivers door and connecting the wires up for central locking and then fix water leak and oil leak and the fit sum driving lamps at front and 2 front fog lights aswell then cars read for launch
-
well we got the driving lamps on and working nd there 3 times brighter than the standard head lights on full beam well tbh ones brighter than both put together lol got sum pics for you
-
some great work fella It compels me to get back into the garage- keep it up! ;D
-
am glad it dus well it stuck out side nar cos were fixing mi sisters car nd her cars in garage sumps leaking oil butnext job is on mine is well i dunt no well door cards nd thats all can rember lol
-
well sisters cars dun so its finishin touches on my car at weekend woooooo!! carnt wit to get on road with it
-
well my cars basicly finished to my standard ust need to put one more speaker in nd fit light nd thats about it nd then when i get money its a full respray nd then sum minilight alloys in gold
-
well my dad got me these - http://cgi.ebay.co.uk/Xenon-Dipped-low-Beam-Bulbs-HB12-FIAT-126_W0QQitemZ280395699233QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item4148e2d421 dunt no if they re brighter yet ant been out but hopefully soon al put em in nd see if they are brighter
-
Please let me know if the new bulbs work. I have seen these bulbs on ebay as well. Your previous pictures showing your headlamps on, seem brighter than usual. did you also use one of those special bulbs?
-
well i put one side in but forgot to take pics the side light bulbs are rubbish all it dus is it make it blue the head light bulbs turn the light white rather than a yellow and in mypic of my spot lights are just standerd h4 bulbs that came with them nd they only cum on when headlights cum on but i will take a pic of them with out the spots on so you can see them betta
-
well little update
got my interior lights dun pics cuming tomorrow for you all then a few little things dun but nothing major dun to it going at a very slow pace but its getting there
-
hey well little update
sorry bout the pics i ant dun had a bad week my little niece went back into hospital with newmoanier again, but on the upside she came out today and we got a full set of cinq seats front and rear for the massive amount of 99p yes thats right 99p i will do pics tomz while i got nowt to do update over weekend nd pics of my new seat which hopefully feel very nice nd cunfee
-
pics for you
-
a few more pics for you all
-
a few more i found and the seat are those seat i got off ebay for 99p
-
well little update the seats that cost me 99p dont fit, so we have striped then and used the rear springs and fitted them on the back of the origanal seats and made sum another part of foam to make it the comfort, like the seats have just come out of a bentley, we shrunk the springs on the bottom of the seats and its now alot firmer and alot comfer and bit more surportive. pics to come just need to find the bit for the comp which has disserpeared
-
well a few pics of my seats striped
well we striped seats and washed covers and then we shorted the springs on the drivers seat so there very stiff now but alot comfyer then we got some more foam and made another layer of foam to make it abit conferrr and thats about it oo and we fitted another 2 springs on the back rest aswell which makes it alot confeerr too and the pics are of what we have dun
-
well little update for you all
we finished the seats and god there comfeee lol
we extended the seat runners to bring them back abit more due to me being to big for the car but i love the car too much to sell it so we gained about an inch or inch nd half extra leg room which helps hell of alot
-
Youv been busy!! Well done!
Chris
-
not realy not as busy as ad like but its getting there lol
-
hey all just a few pics of my extended runner rails
-
few more pics
-
How tall are you man? :)
-
5ft 10 but i got long legs nd before my legs was about 4 cd thick off the steering wheel so we extended them nd now i get perfect postion now
-
well another update we fitted another fuse box so theres only 1 wire coming off the battery instead of 4 or 5 lol and it looks neater nd its easyer to change fuses if they go, pic to come just need to figure out how to get it off the fone ( mines broke)
-
another update for you all,
well we got one door card dun nd on car started with second then i noticed a big pool of water in the glove box and we have no idea where the waters come from but thats about all we've dun today but tomz will be finishing the other door card off and then fitting carpet in the drivers nd putting trim back nd then thats about finished
-
update for all of you out there looking at this lol
finished the door cards fitted another speaker pic to cum tomorrow forgot to take one
i then fitted some head light bezels ( thats what the guy sold them called them) and now it looks like its got a mask on so its now called zoro.
got a pic of that but al post tomorrow with the others.
i then fitted sum crome to the exhuast pipe which looks very nice (would have perfered the bigger version but it will do) thats about it now its waiting for me to pass my test and give it a long run
-
PICS, PICS AND MORE PICS......please
-
well pics for you i have spreaded them out on my other posts for you all save doing loads of posts with one pic on
-
Hello. Did you install the Xenon HB12 60/55Watt headlight bulbs your Dad got you?
-
we just put them in where standard bulb go's, i shal take sum pics for you tomz nd post them tomz
-
You Likes Bises. Much more of this with you than with us in Poland
at this time, however, are sought after because of the greater ease in making a swap.
More pictures!
Yeah, It's right :)
-
well cars all finished jsut waiting for me to pass my test but i couldnt get a good picture of the new light bulbs but they are slightly brighter but make a white light instead of the yellowish glow of the standard bulbs