Club126UK

Fiat 126 Chat => Fiat 126 Chat => Topic started by: ianfromcumbria on June 05, 2009, 07:30:33 PM

Title: sagging roof
Post by: ianfromcumbria on June 05, 2009, 07:30:33 PM
I've read on the forum that a 126 cab is fine for anyone up to about 6'2" in height. I'm a tad over 6 foot and not only is the headlining sagging, but the roof itself is and it is brushing my head. I have to crouch to drive. I can push the roof up but it pops back once I let go. How can I rectify this?
Title: Re: sagging roof
Post by: Gordan on June 05, 2009, 08:12:41 PM
Simply rip the headlinig out! ive done so and now have more headroom than in my fathers golf  [-/
Title: Re: sagging roof
Post by: Rusty's Uncle on June 05, 2009, 08:56:59 PM
First rule of 126 driving "do not look back"  ;D
Second rule " if the lining sags then it is shagged"  :oops:
Just rip it out & get on with it  **-
Title: Re: sagging roof
Post by: Normansinjunstevas on June 05, 2009, 11:35:33 PM
Third Rule : You do not talk about 126 Club

Forth rule : You Do NOT talk about 126 Club

Norman
Title: Re: sagging roof
Post by: Andi on June 06, 2009, 05:15:07 AM
Seems to be time for an Abarth Double Bubble solution on your 126  ;D
Title: Re: sagging roof
Post by: ianfromcumbria on June 07, 2009, 03:49:35 PM
Having read the replies to my post, I've checked the rules for 126 Club membership and nowhere does it state "must be a complete and utter .......

I would suggest that if your not happy with the answers or banter that forum members have written. That you find your own solution or post elsewhere.  Pete126.
Title: Re: sagging roof
Post by: dajwid on June 07, 2009, 04:55:04 PM
Thats the way to get help. :-

Take it out, throw it away, most of us don't have the bit of hardboard it sags rattles and is a waste of time. If you need one it hardly takes a brain surgeon to remove a bit of card and replace. Yours got damp at some point.

Title: Re: sagging roof
Post by: Rusty's Uncle on June 07, 2009, 05:21:37 PM
 ;) Hi Ian , I know that you guys in the deapths of Cumbria can be a tad reserved but do not worry you can use the word "CLOT" here without offending anybody, my Dad calls me that all the time but I let it go as he is past 90 years old now.
"Great" Rusty's Uncle does not post on this site but like many people who do he knows plenty about cars & I think you will find that there are no barriers , social , age , gender , nationality , world location or whatever between the folks that are united by a passion for the baby Fiats.
Having a sense of humour seems to be part of the package but if you can hang with it the advice you will get will be top drawer & based on experience so sometimes the answers are not what you want to hear but that is the way it is.

Quote from your earlier post .......... "I have the mechanical aptitude of a dead heron"

We are not too Heronistic here but I hope that things improve for your car, your aptitude, your local heron and your funny bone   ;D ;D ;D
Title: Re: sagging roof
Post by: bis13 on June 07, 2009, 09:03:04 PM
may i please state if you can save your headlining then do so!!! or be the victim of condensation and more noise in the car. "get some no more nails sort of gunk" and bosh that in to stick the thing back up use some lengths of wood 4 by 2 (and thats not meaning get a yiddo to sit in your car all night rusty) to hold it until its stuck.
 
Title: Re: sagging roof
Post by: phelps8031 on June 09, 2009, 04:04:28 PM
Hadn't really noticed that my headlining was sagging until I read this and checked it. If i pop it back up i got plenty of head room, I'm 6'3" so any extra headroom is nice to have. So today I attacked it with a full tube of sikaflex, well stuck now.  :fing02:
Title: Re: sagging roof
Post by: fightingtorque on July 03, 2009, 10:28:19 PM
I also have a headlining issue that I was meaning to ask about.

The cardboard bit is fine, but the cloth covering is loose.

1.  How likely is it that I can remove it, turn it other way up, remove cloth bit, spray with contact adhesive, stick it back on, get the cardboard bit back in position and be pleased with a good job rather than bugger the cardboard getting it out and in.

2.  If I am going to take it out in one piece, presumably it should be out through the rear hatch?  (I have a Bis).

3.  Is there a cunning way of doing it in situ instead?


I can fix easy things like engines and stuff but when it comes to trim I have been known to lose patience trying to get things apart that were only ever designed to be clicked together and not the reverse.

Title: Re: sagging roof
Post by: Gordan on July 03, 2009, 10:48:14 PM
basically all you have to do is unscrew the few plastic bolts in the back that hold the rooflining in place, then pull it out of the tailgate gently. this is only theory cos usually thing go wrong when they can and your best bet is to rip it out, get a new cardborad and start from scratch... if you do manage to take it out post a few pics, i forgot what mine looked like, and might consider making a new one myself  [-/
Title: Re: sagging roof
Post by: Darrell on July 03, 2009, 10:53:04 PM
I am with you on being a hazard with interior stuff.

And reading the thread I have realised now why I can heardly hear myself think in the car :oops:

I am thinking re-glue-ing would be hazardous as I tried a bit with mine..it ended-up with creases.

So I ripped it out.

Now I am thinking along the lines of a piece of carpet, cut to size, overlocked aroung the edges. The contact adhesived-up. Any thoughts?
Title: Re: sagging roof
Post by: bis13 on July 03, 2009, 10:59:00 PM
just get some thin mdf as was in as original and glue some thin foam onto the roof first then cover the thin mdf and glue into place if you have the original use it as a pattern dont forget these headlinings have fell down after around twenty years or over!!! and its very noisy without one!!
Title: Re: sagging roof
Post by: Darrell on July 03, 2009, 11:05:14 PM
 :oops: I go shopping for thin mdf this weekend if rockers behave [-/
Title: Re: sagging roof
Post by: bis13 on July 03, 2009, 11:23:34 PM
you want to get the stuff thats on about 2mm thick and if you have a haberdashery shop near you get some lining foam thats about 5mm thick and cover the mdf with that then cover with adhesive and apply your cloth make sure before hand that one the glue does not melt the foam and two that the cloth is thick enough to not let the glue absorb through . try using vinyl and if your clever you can punch buttons in at equal distances to make it look super sexy.....
Title: Re: sagging roof
Post by: Gordan on July 04, 2009, 07:44:33 AM
making a new cardborad is what worries me, any1 got the dimensions for the thing? dont have anything that big to make a template  :oops:
so you guys reckon it would reduce the noise in the car?
Title: Re: sagging roof
Post by: bis13 on July 04, 2009, 08:44:52 AM
thats a fact as the roof amplifies any noise in the car even just foam stuck to the roof would make it quieter as the sound waves would not bounce of the roof so easily.
Title: Re: sagging roof
Post by: Gordan on July 04, 2009, 09:33:31 AM
cheers mick, ill see if i can get a new original one from my supplier  :P
Title: Re: sagging roof
Post by: defender90 on July 04, 2009, 05:29:26 PM

    Chaps, that would be Hardboard you need not MDF, I once re-stuck an old Jag roof lining cloth back to the board in situ using a can of spray glue that had a straw type attachment. Made a very small hole in the cloth put the straw through and sprayed it all round before pulling the straw back out and sticking the cloth back up, when done you ccouldn't see the tiny straw hole.
Title: Re: sagging roof
Post by: bis13 on July 05, 2009, 10:14:46 AM
the original was hard board and i replaced one in my first bis with thin mdf (its about 2mm to 3mm thick) and is much lighter and easier to use the original had about 300 holes in it to keep the weight down and make it more flexible .
Title: Re: sagging roof
Post by: Darrell on July 06, 2009, 09:38:56 AM
Just an idea, what if I didnt use mdf and just put like 12mm foam to the roof, and then stick material strait to that..think you know where I'm going with this.

I was thinking a special hood lining covering the whole roof.
Title: Re: sagging roof
Post by: Rusty's Uncle on July 06, 2009, 09:46:38 AM
Hi Darrell , got them disc brakes fitted yet ? Re the roof I have had a couple of 126s where the headlining has been replaced by wide (Just one join down the middle) , about 6mm thick , self adhesive firm foam rubber . Not sure where you get it from these days but sure it is out there  [-/
Title: Re: sagging roof
Post by: Darrell on July 06, 2009, 09:50:32 AM
Hi Rusty, just fighting with the wife to stop buying dresses etc so I can get callipers discs etc.
I am thinking of getting the plates powder-coated as my wheels are rather see-through and you'll be able to see them so want them to look smart...not that the rest of the car is smart hehe :oops:
Title: Re: sagging roof
Post by: Rusty's Uncle on July 06, 2009, 09:59:58 AM
I would be a little concerned about powder coating as although it is quite tough it is a plastic after all and will give and could leave you with loose calipers.  :oops:
I have got the new batch made up now & have been thinking of getting a quote for Zinc plating . I will probably have the set I use done at least.
Title: Re: sagging roof
Post by: Darrell on July 06, 2009, 10:07:23 AM
Good idea  [-/
Title: Re: sagging roof
Post by: fightingtorque on July 08, 2009, 10:53:00 PM
I'll look into it.  Got a few other things to update (improve the wiring for my fuel injection and add a fuel swirl chamber, new MOT etc).

Gav