Club126UK
Fiat 126 Chat => Fiat 126 Chat => Topic started by: puck304 on April 22, 2009, 09:19:22 PM
-
Hi, does anyone out there know where to source 126 tyres from?
Mine are 135 65 13's and are proving hard to come by.... </*
-
Do you know what width your wheels are?
I've had a hunt and can't find that size anywhere but at a guess 145/60r13's would fit too, and these are available on blackcircles for £60.10 a corner
-
that is an odd size?
what year and model is your 126 and does it have standard steel wheels?
-
The standard size should be 135/70/13 on the bis, you should be able to find them locally from any tyre shop, here's some on the net. http://www.mytyres.co.uk/
-
Hi, and thanks for the replies [-/ , my 126 is a 1984 aircooled, and those are the tyres that are on there, which were what the car came with. My haynes just says 135 12, and the wheels to be 4.00 x 12 in. I assume the wheels are all originals, it came with a few spares, and the tyres on those are the same too.
-
the original 12" were 135*80*12 i believe, and 135*70*13 were the standard for a bis, although i used 145*70*13 with no problem...
-
take a pic of your wheels so we can see if they are original fiat/fsm steels as it sounds like you have had wheel swop somewhere as you should be on 12"s if they are 13"s they might be from a different marque?
-
I have 4 135/70x13's that are on my BIS that i am restoring, they won't be going back on as i will be fitting alloys and wider lower profile tyres, two are in very good nick. If you want to swap them with yours as long as they have some tread thats fine by me. Complete wheel/tyre swap that is. £5/each. I can find out the exact brand/tread depth on Sunday. The car is in Nuneaton. Cheers
-
Hi,
I'm having problems trying to upload compressed pictures, so this may have repeated a few times....
I must've been blind on the original post...my tyres sizes say 135*12*65 NOT 135*13*65...
I measured a wheel's diameter and it is 13".
Are these not the correct wheels then? Are these from a BIS?
These are the wheels the previous owner had on.
Cheers again
puck304
-
well they are the original 12" aircooled steelies so its just some bizarre tyre size you have on them just replace them with the original 12" size they are cheap.
-
As Mick said your looking for 135x80x12 which is a standard profile, on the link Mytires there about 20 each but any tire company should be able to supply them.
-
Agree with Mick [-/ can't agree with Pete :o Yes they are the standard steel 12" wheels , you seem to have lost your hubcaps by the way.
Puck , in your reading of the tyre size those smaller numbers at the end are nothing to do with the size. Standard tyres would normaly be marked 135 12 or 135 R 12.
That means 135mms tyre width with a 12 inch diameter rim. If you have an R there that means Radial Tyre but the fact that the tyre width is given in mms also tells you it is a radial tyre.
Interesting that tyre sizes the world over are given in metric for width and imperial for rim diameter . That is a bit of a throwback to when we had one of the best motor industries in the world & called the shots. Prior to radial tyres we had cross ply tyres which were in imperial so a 5.20 x 14 tyre would be a cross ply 5.2 inches wide for a 14" rim.
Most modern car tyres now have a profile rating which is the height of the tyre section expressed as a percentage of the width. So a 135 80 12 tyre would have a section height 80% of 135mms and would in effect be a low profile tyre with a smaller overall diameter so this is where I disagree with Pete about the correct size for the 126 rims. If you did get that size tyre then you would gear your car down , lower the top speed,
improve acceleration & your speedo would over read. :oops:
There are other letters & numbers especialy on some of the more hybred tyres but I have probably confused you enough already so I had better shut up now :)
-
So you think they are 12" ? What is the 13" diameter I measured then?
And what size tyres do I need?
-
Bah, dont listen to theese guys, they overcomplicate things.... lets put it in simple terms. What you got there are standard aitcooled tires, judging by the rim model and by the tire format which IS 135/80/12. so go and buy an identical set, they should be fairly easy to come by.
the tire format is what i circled in the photo, the other numbers have nothing to do with it, just like the others said...
@Rustys uncle; what do you mean 135*80*12 is a low profile tire? the hight of this tire is 108mm, where my 155/65/13 have a height of 100 mms... i wouldnt call that low profile...
o/t. i didnt know Goodyear made tires that small...
-
The bit you measured was the outside diameter of the steel rim but the tyre size is measured at what is known as the bead on the tyre, ie the inner face which is a close fit on the rim and gives you the seal that you need on tubeless tyres [-/
-
OK , you guys are determined to get me cold & wet & I have been out to my garage for a 3rd time on this one. Looked at all the 126 tyres I could easily get my hands on. I noted the maker on each & they were India , Debica , Stomil , Saxa , Kormoran & Kingpin. Every single one is marked 135 R 12 & I have never seen one marked 135 80 13 on a 126. Handbook says 135 12 Radial & Haynes says 135 SR 12. The S here which is as shown in your picture could be for Standard or it could be the speed rating which would normaly appear after the rim size. If the latter is the case then you are OK at speeds just over 110 mph ;D
However :- :- :- looking at tyre info & suppliers on the net some recognise the size 135 R 12 , many do not & some suppliers are listing the 135 80 12 tyre size. So my question is are these sizes one & the same ?
-
However :- :- :- looking at tyre info & suppliers on the net some recognise the size 135 R 12 , many do not & some suppliers are listing the 135 80 12 tyre size. So my question is are these sizes one & the same ?
Yes [-/
-
Just to clarify. A tyre without a profile stated is an 80 Profile or aspect ratio (why i don't know, just historical i think)
The remaining information on the tyre should be read as follows - example tyre eg 195/50x15 H
195 = Tyre Width 195mm
/50 = Aspect Ratio or profile - This is the height of the sidewall of the tyre - in this case 50% of the width 195 = 97.5mm
x15 = Diameter of the wheel in Inches = 15 inches
H = the speed rating of the tyre - H = 130mph Maximum Continuous Speed.
On some older tyres the speed rating was quoted between the width and diameter 125sr12
which could also be written 125/80x12 S
S = 113mph Maximum Continuous Speed in both cases.
-
:) Cheers for that , I was going to ask Pete if he could explain but you have already done it & I have never come across that before even though I used to sell & fit the things ! but I was a student then and the Beatles were getting quite popular ::)
I do not mind admitting I was wrong but from what you say we were both right but my knowledge goes back to the days just after they phased out solid tyres </4 </4
-
i too do not understand why they didnt just say 135/80/12, but thats the way it is, i too wouldnt know, but my local tire salesman told me so when i went looking for a new spare wheel for my bis (they too are 12" )
-
I bought a few 135 R12 65S tyres last year, and I can confirm that they are the bog standard 135x12 with a 80 profile.
-
I'd like to thank everyone for their help and input...I didn't realise I'd open up such a can of worms, but it had confused me, and not only me, by the looks of it! Hopefully I'll be able to source some no problem now... [-/
-
its nice to have a lively debate every now and then, keeps the juices flowing [-/ :D
-
In reply to your shoutbox post, and previous posts in this thread, it seems you are correct - 135/80r12's are nowhere to be seen. If it helps, I have 135/70r12's on mine (http://cgi.ebay.co.uk/135-70-12-tyres-new_W0QQitemZ320435024893QQcmdZViewItemQQptZUK_Cars_Tyres_RL?hash=item4a9b6a73fd) which are perfect, and www.camskill.co.uk do a 145/70r12 tyre which should also do nicely.
-
Also have a word with Chet
http://club126uk.co.uk/smf/index.php?topic=4138.0
-
Thanks for those, any other sizes fit like 145/70? [-/