Club126UK
Fiat 126 Chat => Fiat 126 Chat => Topic started by: 1973/126 on March 27, 2009, 07:40:32 AM
-
I`m selling some alloy wheels on eBay for my neighbour, but I`m not sure what PCD they are. They are either 4x98 or 4x100, but is hard to tel the 2mm difference. Is there a web site to find out? They are OZ(01326220).
Any help appreciated.
-
Chances are that the wheels will have been available in various PCD so Make/Model won't be a lot of use :(
There are tools that you can buy to check. Something lke this, if you can find it in the UK
http://cgi.ebay.com/ebaymotors/4-Lug-SAE-and-Metric-Wheel-Bolt-Pattern-Tool-One_W0QQcmdZViewItemQQ_trksidZp3286Q2em63Q2el1177QQhashZitem220255519128QQitemZ220255519128QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
I just did a quick search on e-bay
-
Found a UK one!
http://cgi.ebay.co.uk/4-stud-metric-PCD-Finder-VW-BMW-Ford-Vauxhall-Fiat_W0QQitemZ180339853892QQcmdZViewItemQQimsxZ20090325?IMSfp=TL090325153002r8221
-
Ordered it just in case. Could be helpful in the future. Hope it will do the job.
Thanks [-/
-
easypcd.co.uk mark makes em and they is noice!-
(http://i154.photobucket.com/albums/s262/markbognor/DSCI0040-2.jpg)
-
;) I was just about to reply when my son came round to nick my car for the weekend. Asked him if he wanted any food before he went off to see Peterbrough give those crisp eaters a thrashing in the morrow. No he said , my lady just made me some venison burgers. Bet they were deer I said ;D Bit like that bit of plastic </4 Sorry but I cannot imagine anyone owning up to owning one as I think you can get a Tesco "back to school" ruler for about 10p. Now that the mystery of NOS has been solved then I can tell you non-tech guys that do not know that PCD stands for pitch circle diameter which means the diameter of the circle upon which the holes have been drilled. So on four stud wheels all you have to do is measure across two opposite holes or sides of to get an accurate reading
-
Well in this case PCD stands for Plastic Came Dear... :oops:
-
lol I take it you dont want one then... ;D
-
;) I was just about to reply when my son came round to nick my car for the weekend. Asked him if he wanted any food before he went off to see Peterbrough give those crisp eaters a thrashing in the morrow. No he said , my lady just made me some venison burgers. Bet they were deer I said ;D Bit like that bit of plastic </4 Sorry but I cannot imagine anyone owning up to owning one as I think you can get a Tesco "back to school" ruler for about 10p. Now that the mystery of NOS has been solved then I can tell you non-tech guys that do not know that PCD stands for pitch circle diameter which means the diameter of the circle upon which the holes have been drilled. So on four stud wheels all you have to do is measure across two opposite holes or sides of to get an accurate reading
cool mate, just wondering, do you measure the inner end of the screw hole, the middle point or the outer end?
-
£4.50 Blimey what a rip off.
Just bought one from Ebay, so many cheap alloys at boot sales where the owner has no idea what they fit.....