Club126UK

Fiat 126 Chat => Fiat 126 Chat => Topic started by: markie on February 07, 2009, 08:43:24 PM

Title: Fuel pipe bore size?
Post by: markie on February 07, 2009, 08:43:24 PM
Hi Guys so haw many of you have been out doin donuts in the snow??  LOL  Anyway what I want to know coz I can't be bothered to check is does anyone know the correct bore size of the fuel pipe?  6mm?  8mm?  Let me know and don't start arguing with each other!
Title: Re: Fuel pipe bore size?
Post by: Gordan on February 08, 2009, 05:39:53 AM
8mm, no arguing  :oops: :D
Title: Re: Fuel pipe bore size?
Post by: dajwid on February 08, 2009, 09:04:28 AM
Not arguing but :-

I fitted 6mm braided It is a tight fit but goes on. I found 8mm a bit loose and would have needed very tight clamps. (I am talking AC not WC though)
Title: Re: Fuel pipe bore size?
Post by: Gordan on February 08, 2009, 03:38:50 PM
then 7mm would be perfect :P
Title: Re: Fuel pipe bore size?
Post by: markie on February 08, 2009, 03:57:03 PM
Cheers guys!  That's made things a lot clearer...   Not!  LOL
I told you no arguing!
Title: Re: Fuel pipe bore size?
Post by: markie on February 08, 2009, 04:12:39 PM
I can settle this now!  It's 6mm, I just measured one of my inline fuel filers which I fitted without without clamps a perfect fit and 6mm Ok guys!
Title: Re: Fuel pipe bore size?
Post by: Gordan on February 08, 2009, 04:28:41 PM
i know i have 8mm on my bis. so the airc. must be different...
sorry we couldnt be of more help, but its like that, and thats the way it is  :oops: :D :D
Title: Re: Fuel pipe bore size?
Post by: markie on February 08, 2009, 05:08:46 PM
The Outhere Brothers!  Kewl Blast from the past! LOL ok I'll test you! "thats just the way it is" "some things'll never change"  ;D
Title: Re: Fuel pipe bore size?
Post by: Eklipze3k on February 08, 2009, 05:44:33 PM
That'd be Run DMC Mark, but I'm sure Gordan will let you off ;)
Title: Re: Fuel pipe bore size?
Post by: subvert73 on February 08, 2009, 05:59:02 PM
Isn't it Bruce Hornsby?
Title: Re: Fuel pipe bore size?
Post by: Gordan on February 08, 2009, 06:08:53 PM
Yes, im quite sure that was the RUN DMC  [-/
man, we really know how to off topic on this forum dont we?? luckily the mods arent as strict about it as on some other forums i know  :oops: [-/ [-/ [-/ [-/
Title: Re: Fuel pipe bore size?
Post by: markie on February 08, 2009, 06:18:51 PM
I stand corrected Run DMC V Jason Nevins A sweet tune to play on your incar sound system Fitted to your 126!  Are we getting back to Topic now?
Title: Re: Fuel pipe bore size?
Post by: Gordan on February 08, 2009, 07:04:36 PM
Are we getting back to Topic now?

well, if we gotta...  :oops:
Title: Re: Fuel pipe bore size?
Post by: bis13 on February 08, 2009, 07:36:32 PM
talkin about pipes i find a mid length mahogany with bone mouthpiece is a must for the finer of the ready rubbed tobacco thats available nowdays what?
Title: Re: Fuel pipe bore size?
Post by: markie on February 08, 2009, 08:01:11 PM
I prefer Rough Shag but that's another topic, nothing to do with the 126 unless you have mirrored windows and are very very small!??

Visit http://www.smokersforums.co.uk/
for more info

Other good websites are available.
Title: Re: Fuel pipe bore size?
Post by: Gordan on February 09, 2009, 05:05:10 AM
the pipework in my house was done using plastic pipes!  8)

(were so going to get it...  :oops: )