Club126UK
Fiat 126 Chat => Fiat 126 Mechanical Problem Solving => Topic started by: joda on January 04, 2009, 09:56:19 PM
-
few of us have had gearbox problems in the last week while,
ive fitted my gearbox, and its great to be back in the 126, but find that first is sometimes a bit funny to find, crunch crash bang
whats the best way to get first gear everytime to preserve the life of the gearbox?
-
Coming to a complete stop?? :P
-
also, why does my gear stick spin 360 degrees, its so anoying!! it stops me getting changes right!
any1 know how to fix it?
-
mine spins too, but i think its normal, but what has it got to do with gear changing, let me guess, you dont know where the gears are, so you have to look at the little diagram on the stick, but its upside-down so you use the wrong one?? :oops: xmas1 </4 </4
by the way, would some of our more seasoned members mind explaining the concept of "double de clutching" to us newbies, as they don't teach this in drivers school, and i would very much like to know :D
-
You don't need to double de-clutch on any 126 box. It was essential on the early 500 'crash' gearbox with no synchro. It has been argued that you need to double de-clutch on the 126 box when shifting down into 1st (as there is no synchro on 1st), but in reality, you shouldn't have to shift down into first when the vehicle is moving, thus eliminating the need.
Double de-clutching is essentially, putting your foot on the clutch, then sticking the gear stick in neutral, then back on the clutch, selecting the gear and finally releasing again. You would have to do this when changing from any gear, to any other gear on the old 'Crash' boxes. As well as this, you would have to carefully match the revs, to the right gear to avoid the dreaded crunching sound.
-
Thanx Dom, yes i was thinking about 1st gear, just curious i guess, once i get my bis rolling again ill try to use the 2nd gear like some members suggested...
-
as stated continuously on this site dont change down into first if your still moving!! use it as a pullaway gear only!
-
as stated continuously on this site dont change down into first if your still moving!! use it as a pullaway gear only!
may i add also...if your in nuetral, clutch up at the lights....before you select 1st, select second, then 1st, so, clutch down,drop into 2nd then go into 1st, doing this uses the syncro 2nd gear to stop the gear cluster spinning at engine idle speed and helps to eliminate ANY crunch into first.
a good tip is every time you crunch 1st or reverse, stick a pound coin in a tin.......youll have enough for a new 1st/reverse gear by the time you ruined your good box. ;D
-
as stated continuously on this site dont change down into first if your still moving!! use it as a pullaway gear only!
may i add also...if your in nuetral, clutch up at the lights....before you select 1st, select second, then 1st, so, clutch down,drop into 2nd then go into 1st, doing this uses the syncro 2nd gear to stop the gear cluster spinning at engine idle speed and helps to eliminate ANY crunch into first.
a good tip is every time you crunch 1st or reverse, stick a pound coin in a tin.......youll have enough for a new 1st/reverse gear by the time you ruined your good box. ;D
im pretty sure you mean what i was going to write, but even i was confused by your explaination and i know what youre talking about, so i'm gonna explain it my way anyway.
basically yeah, you want to use the synchro for second to stop the gearbox spinning before you engage 1st.
once youre at a complete stop (and ready to get going again), push the clutch pedal in (if it isnt in already), move the shifter into second, then into first, now youre in first with no crunches! you can let the clutch out and take off as usual.
i got into the habit of doing this a good 8 months ago, i've learned that you dont actually have to engage second gear, you can feel the synchro stop the box just before you actually get there, as soon as you feel that little clunk you can jam it into first, you dont have to wait at all. it barely takes any extra time and itll save your first gear.
one note though, occasionally first stops with the teeth lined up so it cant go in, in which case you have to move back to neutral let the clutch pedal out, then start all over.. still takes no time at all once you've done it a few times. definately worth it.
the same thing can be done if reverse crunches (mine doesnt seem to?), as theres no synchro there either, i'd use third instead of second though, just cos it's closer. when youre not moving all the sychros should have the same effect.
i'm really glad this thread came up.. if everyone did this then worn first gears would be a thing of the past..
-
one note though, occasionally first stops with the teeth lined up so it cant go in, in which case you have to move back to neutral let the clutch pedal out, then start all over.. still takes no time at all once you've done it a few times. definately worth it.
now theres a pain in the rear part of your body... ::) :P
-
[-/ Excellent & one of the things I love about this site is the pearls of wisdom that get posted. That is the best advice I have heard recently on how to beat the crunch !! ;) ;) Also looking at the Blitz web site there seems to be an arguement for reverting back to a non syncro Fiat 500 box for strength of gears and low close ratio gears if you want something nippy about town. Has anyone ever fitted a Bis diff on a 500 box?
-
[qu
im pretty sure you mean what i was going to write, but even i was confused by your explaination and i know what youre talking about, so i'm gonna explain it my way anyway.
[/quote]
im so sorry to have confused you, i'll shut up now and fade away like old 126'rs should. ta da.
-
ha ha ;D
-
Sorry to drag this one up.. is there anything wrong with taking off in 2nd gear ?
-
it might put a bit of a strain on the gearbox/clutch and be a bit of a slow start but many folk have been forced down this road when the first gear has gone i would recommend that if first is available then use it but remember it is solely a pullaway gear and make sure you have stopped completely before selecting first again (for example at junctions) even if you double declutch and try to engage first it can still be a bit hit and miss and end up crunching the gears so best to avoid.
-
Is a noisy first a sign of the end being close?
My fourth is also a bit noisy, it whines :oops:
-
Darrell, I'm no expert but from experience the first gear whining is ok but the fourth gear whining might mean the end of your cluster gear. My box used to whine in fourth and when it died i found thats what it was. If its the same prob you just need one of those gb repair kits that go for about 100 pounds.
I do have a beef about the prices of these gb parts. I went to price completely new internals for mine and the total price came out to 751 euro before postage to Australia. You can buy a six speed getrag box for that kind of money. I suppose someone is getting rich of us enthusiasts >:(
-
Yeah the whining hasn't got any worse and the box has done about 20000 miles as it is.
I been looking at the prices of gearbox internals as well and unfortunately I think we are stuck with 500 pricing as 126 parts end-up on 500's. And 500 owners seem to have deep pockets ;D
I guess we should be grateful we can still get stuff but it hurts when you have to :P
-
Great advice re gearbox - I've been struggling a bit with first too and am paranoid about not using it unless at a complete stand still. I have gotten into bad habits over the years of putting cars in neutral on approach to junctions/lights etc and then putting them in first whilst still rolling. Aware with the 126 i can't do this (not that i understand what synchro is or any of the other technical terms!). So, i take it from the advice here, it's ok to put in 2nd and then into first from there when at a complete stop? I also find myself taking off in 2nd quite a lot but never from a complete stop.
Great advice, invaluable.
Mhairi
-
i found if fourth whines the oil is low and needs topping up.
-
I thought I saw cheap gears and refurb parts on 126fan.sk and here http://www.fiatclassic.com/HTML126/KATA126U.HTM#gear%20box
-
Checked the oil in the box today and it is a bit over-filled.
Still whines like normal in 4th.
Is there anything one should look for that would cause a gear to whine?
I can whip the box out and have a look inside, have quite a few spare gears so can change any in necessary.
I've never understood what they mean by 'backlash' can that cause a whine if that is not done correct?
I know there is a specific type of oil for gearboxes on a 126 but would standard 90 gear oil cause a hassle?
-
I never use 1st gear on the move, only to pull away, or stop completely then change down. [-/
Tom
-
Darrell, i still think its your cluster gear/bearings. If you whip out the box and have a look i'll bet that the main (biggest) gear on that shaft will have teeth missing, also the gear it connects to below will/might have teeth missing. This puts a shock loading on the bearings on that shaft and will make the whining noise in 4th.
It usually takes me about half a day to "whip" out my gearbox
BTW nice wheels, never seen jelly beans on a 126 before. Old Skool Cool Rools
-
Thanks for that, will whip it out next weekend.
I have to confess that the big bearing on the shaft that drives the diff went....but it was a while ago now and cannot remember if it was this box or the previous box :oops:
This box has been very good and like I say done about 20000 on it and doesnt show any signs of weakness but this noise.
Today we did about 60 miles and I sat there thinking it would be mighty pleasant if that whine wasnt there...
So if it was this box that had the bearing go, it makes sense there might have been some damage to the gear.
A silent 4th...I'd be in heaven! It's only taken 20000 miles to decide to do something about it :P
Also it'll give me a chance to check if I have a BIS diff or not :oops: