Club126UK

Fiat 126 Chat => Tuning & Customising 126 Models => Topic started by: Milky on September 11, 2005, 07:53:31 PM

Title: Alloy Wheel Refurbishment and Tyre Choice
Post by: Milky on September 11, 2005, 07:53:31 PM
Hi Folks

Got hold of a set of X1/9 Cromodora alloys, which need refurbishing. Any one got any contacts in this field?

I test fitted the wheels on my BIS, and they fill the rear arches beautifully, but are a bit too big for the front.

The 2 that have tyres, the tyres are shot, and I can't read what size they are.

The wheels are 5J x 13, and I could do with some advice on what size tyres to fit.

I will post some pictures on my website in a day or so of the wheels on the back.

Cheers
Mily
Title: Alloy Wheel Refurbishment and Tyre Choice
Post by: slater on September 12, 2005, 10:28:04 PM
Humm no bigger than 165 with nice low profile i would say. If you have problems with tyres fouling the arches then you can stretch tyres and use lower profile to help get around the problem.
Title: Alloy Wheel Refurbishment and Tyre Choice
Post by: Milky on September 12, 2005, 11:07:31 PM
Slater

Just had a look, and the tyres on the 2 wheels are 165/70R13, and they foul on the front.

The original tyres are 135/70R13.

Any ideas on what profile 165's would be OK?

I would like to keep the 165/70/R13 on the rear, as they fill the arches perfect.

It would mean carrying a tin of that puncture foam, rather than 2 spare wheels!!

I am a little concerned with the width as well, catching when the wheels are in full lock.

I may try and get a couple of part worn tyres fitted just as a test.

Is there some sort of a formula for calculating the profile of the tyre to make it clear.

Thanks
Milky
Title: Alloy Wheel Refurbishment and Tyre Choice
Post by: ChrisRLewis on September 12, 2005, 11:37:59 PM
I think the profile ratio is a calculated like this?
example: 165/70x13

165 is the tyre width in mm
70 is the tyre profile in % of the width, so it's 70% of 165 mm
13 is the tyre diameter in good old inches

I cannot guarantee this is correct, just going off memory
Title: Alloy Wheel Refurbishment and Tyre Choice
Post by: 126dave on September 13, 2005, 11:32:49 AM
i have 5 1/2 j x 13 CD 11 cromodoras on my 650 running 165/55 profile,they JUST touch on the lower part of the front arch SOMETIMES,im living with it..................dunno whats gna happen when it gets lowered though :roll:
ALSO,the same profile/width sized tyre can be different between manufactures,the way the shoulder of the tyre is designed can give you more clearence for the same size tyre
Title: Alloy Wheel Refurbishment and Tyre Choice
Post by: Chris Lakin on September 13, 2005, 02:56:18 PM
Dave let us have a pic of your alloys in action! Please  :roll:

I hav just had fun and games recently with buying tyres, not many companys produce the orginal tyres now for our sizes.

I dont think that rubbing/knocking is a problem, my m8ty has a golf gti hes just had it lowered and occaisionaly over certain rough country road bumps it scrapes.

Chris
Title: Alloy Wheel Refurbishment and Tyre Choice
Post by: stuey on September 13, 2005, 09:35:05 PM
for re-furbing try www.aerocoat.net as for tyres im running 175.50.13's (mini tuners sell these)
Title: Alloy Wheel Refurbishment and Tyre Choice
Post by: slater on September 13, 2005, 10:02:06 PM
Yeh thats a good tip. look at Minis they have simlar problems and simlar sized wheels :)