Club126UK

Fiat 126 Chat => Fiat 126 Chat => Topic started by: jon.hunt on May 04, 2008, 04:36:07 PM

Title: Rally Seats
Post by: jon.hunt on May 04, 2008, 04:36:07 PM
Hi
    Wondering if anyone know's Which Rally Seats will fit in a 126 as I've just bought a Pair, There Black with Grey Panels and Look Great, But there to Wide, they just won't Fit in.

                                                            Jon.
P.S.  I'd still like to be able to use the Back seat at a Pinch, if possible.
Title: Rally Seats
Post by: stuey on May 04, 2008, 06:45:42 PM
I have corbuea's in mine- I had to use the 126 runners on the frames of the corbuea seats to get them to fit- its tight near the doors (no more than a centimetre) and I then tied the harneses in on the rear seat c piller seat belt mounts so that as you say "at a pinch" you can use the back seat!.
Title: Rally Seats
Post by: Rusty's Uncle on May 05, 2008, 12:10:10 PM
Not quite Rally seats but I have got a pair of pretty rare 126 aircooled front seats with headrests that are for sale. They either need new covers or some one who can do some repairs with a sewing machine. Frames & runners are fine plus I replaced the broken springs.
Title: rally seats
Post by: Enzo2 on May 28, 2008, 05:50:06 PM
I fitted a OMP TR5 (page155 of demon tweeks catalogue).  Fitted ok but needed two sets of base mounts (no 1 page 156).  One of the base mounts had to be turned so it points in to the car or they are too wide.  Bolted and then welded. You will also need to angle the seat slightly or the door won't close.  Place in position then close door.  Mark holes for drilling and fit. Total cost about £110.  See my car in the garage (Enzo 2).  You will need a harness seat belt too.

I'm fitting the passenger rally seat this weekend.