Club126UK

Fiat 126 Chat => Fiat 126 Chat => Topic started by: welly272 on March 12, 2008, 07:34:31 PM

Title: 126 bis brakes
Post by: welly272 on March 12, 2008, 07:34:31 PM
Im have real bad problems with my brakes. Ive changed all the wheel cylinders, flexy hoses,steel pipes, shoes bleed them and have removed all the air but cannot get a good pedal. The brakes work but the pedal is crap, the pedal stops 1inch from the floor . Ive clamped the hoses off then i get a good pedal so it would indecate that the master cyilnder is ok. The only thing i can see is that the sel f adjustson the linings dont work has any one esle had this problem and if so whats the cure
Title: 126 bis brakes
Post by: Gordan on March 12, 2008, 07:43:59 PM
I had a similar prob with mine, dk if its the same thing but here goes:

when i changed them for the first time i went to the store and got the same ones as the originals and put them on, they fitted perfectly, but braked like crap, then i found out that the self adjusting thingy was a tat longer than the orig, went back to the store and the salesman gave me an older model which works perfectly.
if u changed them recently, compare the S.A. springs if they are the same..

(http://club126uk.co.uk/forum/userpix/559_untitled_9.jpg)

hope this helps

G