Club126UK
Fiat 126 Chat => Your Restorations => Topic started by: claire on December 30, 2007, 05:08:57 PM
-
(http://fiat126club.co.uk/forum/userpix/534_DSCF1375_1.jpg)
Yes, it's in a Fiat Ducato.... :shock:
(http://fiat126club.co.uk/forum/userpix/534_DSCF1376_1.jpg)
Seriously!!:lol:
(http://fiat126club.co.uk/forum/userpix/534_DSCF1377_1.jpg)
In her new home!!
(http://fiat126club.co.uk/forum/userpix/534_DSCF1378_1.jpg)
With her new sister..... :wink:
Here is my new project, many of you will recognise her as Beryl! I picked her up today. The plan is to take out all the glass etc and have her resprayed. I will do as much of the prep work as I can at home (ie, sanding, filling, treating rust) before putting her back in the van to take her to the paint shop, where I will weld and paint her. Don't worry, she's staying her beautiful brown colour. It was suggested I paint her broom yellow and show her and the seicento as a pair but....... Im not convinced!!! What does any one else think??
-
Yellow is good. Pleased she made it back in 1 peice. Hope you are happy with her, Please it went to a good home.
-
I'm very happy with her :D
-
soooo......
Day 2:
Here's what we have to work with......:lol:
(http://fiat126club.co.uk/forum/userpix/534_DSCF1380_1.jpg)
(http://fiat126club.co.uk/forum/userpix/534_DSCF1383_1.jpg)
(http://fiat126club.co.uk/forum/userpix/534_DSCF1384_1.jpg)
(http://fiat126club.co.uk/forum/userpix/534_DSCF1387_1.jpg)
(http://fiat126club.co.uk/forum/userpix/534_DSCF1388_1.jpg)
(http://fiat126club.co.uk/forum/userpix/534_DSCF1389_1.jpg)
Just a little rustier than we'd hoped........:shock:
Tomorrows jobs: strip doors and finish re-assembling engine after replacing cables. Then plate welding, filling and sanding.... woohoo.
Wheels are off to have tyres removed, them they will be sanded (by hand :lol: ) and resprayed...
-
erm, trying to rescue a bis from noth london but dan't have a trailes.
so the question is:-
did you transport beryl in a transit? was it easy to get in/out?
thanx
watt
-
This was a fiat ducato with floor width of 1400mm (measured between the wheel arches), and a length of 3200mm. We used two 8ft scaffold planks to push her in as she didn't run, but you could always drive in sloooooowly. You would need at least 3 people as we had 1 pushing, one steering and one spotting. Getting her out was a doddle, but make sure the brakes work first :shock: The hardest bit will be getting in/out of the car once its in the van. The best bit about the ducato is it has one of those big sliding doors on the side so we put her in backwards so the doors lined up :D
At least they're light (450kg). Load weight of the ducato was 1ton.... :lol:
-
Well, it has been an eventful weekend what with the engine and gearbox coming out! I've decided to leave them out for now and spray the engine bay black :lol: that way it doesn't matter what colour pipes i put on the engine, it wont clash!! (Brown clashes with e-v-e-r-y-t-h-i-n-g...) :cool:
If you want to see the pictures i now have a photobucket thingumy...
:P
http://s248.photobucket.com/albums/gg188/claire126sei/
-
http://s248.photobucket.com/albums/gg188/claire126sei/?action=view¤t=c443e490.pbr
Shud be in the right order here....
-
Whats the latest?
Did you get the Alloys blasted?
Is she ready for paint??
-
I have sprayed a lacquered the engine bay in black so that it will look good with coloured pipework. I was hoping to put the engine back in this weekend, but ended up lowering my seicento... :roll:
She should be going for paint this week all being well. I guess this will take around a month to complete as I am only allowed in on saturdays to do the prep!! The plan is to take her over without the engine in inside the big white van :lol:
She's going to stay brown :D I've decided to re-cover the interior in cream leather to contrast with the rown exterior.
-
Ready yet??
-
She is complely stripped down now. Has taken longer than it should have done as she didn't get to the workshop til this weekend. Im going to sand her next week and hopefully she'll have all her paint work done by the following weekend ready to come home for the engine and gearbox to go back in :D
The other thing that slowed proress down is the other half bought another 126. It's an old R-reg that someone's messed about with. His plan is that one will be yellow, lowered and have a sound system... hmmm.... :shock:
-
(http://i248.photobucket.com/albums/gg188/claire126sei/th_bbf877f6.jpg) (http://s248.photobucket.com/albums/gg188/claire126sei/?action=view¤t=bbf877f6.pbr)
Here are some pictures of the work that has taken place so far... she was painted at the weekend. I decided on brown as the other half wants to paint his yellow to match my seicento... :shock:
-
I think its quite wonderful that so much time and effort has been put into this little car... well done, most cars in the state that yours was would probably be scrapped, so once again, wery nicely done, congrats... :smt023
(i now see what you guys, and gals have to work with over there, the car that i wanted to buy for parts was in a far better shape than this brown 126 but will probably be sent to the big parking lot in the sky cos folk over here dont think theyre worth the effort :cry: )
-
(most cars in the state that yours was would probably be scrapped)
:lol:
Bloody cheek, it was a great little car. :D
In Poland a really decent 126 is already demaning £1000 - £1500
Sadly as you say people still look down on them, it is changing very fast. Get one while you can.
I am still busy having a 1.2 aircooled engine squeezed into a 126.
Mechanic is having more trouble than expected :cry:
-
erm... ups... sorry... :oops: :D
but ive seen far better cars getting scrapped, mine was heading in that direction cos noone wanted to buy it... and there is almost no rust on it... luckily it found a crazy enough owner to invest a LOT of nerves, time and money to make it shine again... :wink:
decent 126es here are still wery cheap, about 150 punds for a old italian model, i found a great FSM126 for 35 pounds :!: , only the bises cost more, about 200 pounds +.
-
the one i wanted to buy for parts was brought home in a ford transit couse it hadnt been registered. they brought it to a petrol station in the van, opened the sliding doors and filled it up in the van. needless to say people were staring amazed, and the worker there said that in his 30+ years on the p. station he hadnt seen anything like that... :D :D :D
-
Just looked at your 126 in the spray booth - luuuurrrvvley! Mines in the shop at the mo having some rust work done, hope it looks as good as yours! I think you chose the right colour, I like it when it goes back original (and you don't need to paint the interior).
-
lol. It must be a tight squeeze!! When was it (he?she?) meant to arrive?
Im now putting Beryl back together (Sloooowly due to the weather :cry: ) and she's looking good!! I might try and get to the retro rides thing in August if she's finished... lol.
-
Pleased she went to a good home. and will be back on the road soon.
Mine should have been ready a couple of months back,but the mechanic is having more problems than he thought, still thinks it will be up and running though, It needs to be right is is a long drive from Poland in a normal 126 let alone a lowered hard as rock suspension, stripped out 1.2 aircooled 'very noisy' :lol:
Can't wait to see Beryl finished, keep up the good work, if you need any bits let me know. (I think you have quite a lot though) :lol:
-
Lol, Cro_126bis. I can believe there is someone else crazy enough to put their 126 in a van!! :lol:
ciaoflyer - thank you! I am reasonably happy with the paint, although she has a slight blemish on the bonnet and the door, where the paint seems to have reacted to the filler, despite having applied primer prior to colour. One she is up and running I'm going to get these bits flatted and resprayed.
Dajwid - don't forget to take earplugs!! :lol: ...and possibly a cushion :P
I think im ok for bits at the moment, as I bought a full set of parts, minus pannels, consisting of everything from an extra set of windows to full running gear and a spare engine... which means we have two 126es and 4 engines.... hmmmm.....
-
I'd love a workshop as big as the one in the one pic of the spray painting!
-
I wish it was mine, but it's where my other half works - we borrowed it :cool:
-
id be happy with an tiny garage, just to get it out of this $%&?*€@ rain... :shock:
-
Whats the latest? Finished yet?
-
Woo!! FINALLY have all the engine parts back from paint (don't ask... took 3 months... never trust people with your car parts...) So the engine will be reunited with the car today if all goes to plan... :D
-
Great news! Keep the piccies coming.
-
Well, I've put the engine back together, attached it to the gearbox and attached the fuel tank :smt026
Most of the trim is back in, other than the front seats and door cards. Haven't had a chance for photos as just packed up for a party tonight :smt030
Hopefully will have time to put engine into car on Monday :smt021
Claire :smt064
-
Well, I've put the engine back together, attached it to the gearbox and attached the fuel tank
Most of the trim is back in, other than the front seats and door cards. Haven't had a chance for photos as just packed up for a party tonight
Hopefully will have time to put engine into car on Monday
Claire
Blimey a 'I've got the engine in party' :lol: :lol:
-
hahahaha. Nah. Just a housewarming at a friend's. :smt043
-
This car is now in the for sale section :'( *sniff*
Claire x
-
Now has a new home ;D
-
Yepppp - she has gone to a new/old home [-/
-
ha ha i like it returned again how funny that will be on the v5 history at dvla its like car tennis...
-
Maybe Chris wants to buy it back just to really confuse them :D