Club126UK
Fiat 126 Chat => Fiat 126 Chat => Topic started by: DanRodd on November 11, 2007, 12:55:39 PM
-
Hi all,
I have a few bits of rust that the seller of my 126 neither mentioned nor pointed out,mainly below the bumper at the join of the front panel and inner panel,a bit at the top of the panel below the lid,a hole in the inner wing,a bit round the back lower rear corners etc.its all hidden so at least thats one good thing.
would i have to have an entire new front panel or are there repair patches out there?the front panel does have a few dings in anyway.
I was wondering if anyone on here could give me a rough guide as to what the work would cost,to either replace the front panel or repair it and weld it all up?
i will either have to fill up the holes and paint and underseal then wait for a nicer car to turn up,or i will have it all done and keep the car!It would be a shame to have to sell it if it costs too much because the interior is mint,the mechanics are good and all the main rust areas round the screen etc are perfect
would welcome any advice.
Dan
-
Anyone? :shock:
-
try and post some pictures up, it will give us more idea
-
will do when its not raining and light! :lol: i dont think its that bad,but id rather have it done properly rather than sticking a load of filler in there.I was just after some prices as examples of work people have had done to their cars.
-
I had the front replaced and a wing. I dont think it was silly money. The panels are really cheap www.fiat500126.de so it depends on how much your mechanic will charge for the labour.
-
With thin steel body panels a £40 angle grinder and £100 worth of mig welder could do the trick.
Frothy
-
problem is i cant weld and havent got the space to store a welder,or indeed anywhere to do it properly,just trying to gauge an idea of prices.
-
unfortunately without seeing the car its like asking how long is a piece of string, welding usually costs £30-£40 hr or a bit less if its a friendly cash jpb, find a specialist restorer if you want it done properly, just welding a bit of plate over the hole as every MOT station will do is a waste of time and will quickly send any car to the scrapper. a specialist will not only do a proper job but they will probably cost less as they know what they are doing and take less hours to complete a job