Club126UK

Fiat 126 Chat => Fiat 126 Chat => Topic started by: Idle Steve on June 25, 2007, 06:52:49 PM

Title: Fiat 126 rear inertia reel seat belt conversion!
Post by: Idle Steve on June 25, 2007, 06:52:49 PM
Done it! converted the rear seatbelts to the inertia type. :smt080
The car gets used daily for the school run and the others were a right pain for the kids :sad:
Check it out here http://i201.photobucket.com/albums/aa65/IdleSteve/IMG_2472.jpg
And here http://i201.photobucket.com/albums/aa65/IdleSteve/IMG_2476.jpg
Another,
http://i201.photobucket.com/albums/aa65/IdleSteve/IMG_2474.jpg

I have a full set of photo's following the conversion and the making of brackets etc if anyone wants to see.

Steve.
Title: Fiat 126 rear inertia reel seat belt conversion!
Post by: phreak97 on July 16, 2007, 04:43:50 PM
something is different here...... thats not a place i have ever seen in a 126.. what type of 126 is that?
Title: Fiat 126 rear inertia reel seat belt conversion!
Post by: bis13 on July 16, 2007, 05:25:20 PM
thats a bis water cooled model.
Title: Fiat 126 rear inertia reel seat belt conversion!
Post by: phreak97 on July 17, 2007, 02:04:29 AM
wow, i didnt know they were actually different.. is there a rear hatch now? thats kinda what it looks like in that pic..
Title: Fiat 126 rear inertia reel seat belt conversion!
Post by: nathan126 on July 17, 2007, 05:11:48 PM
Yeah the BIS has horizontal cylindars which meant that the rear could be re-designed to give more room.

http://www.pverhoeven.de/motor.jpg
Title: Fiat 126 rear inertia reel seat belt conversion!
Post by: phreak97 on July 22, 2007, 01:00:07 PM
i was looking in my fsm air cooled today, and it has retracting seatbelts in the back as stock.. what are innertia type belts?
Title: Fiat 126 rear inertia reel seat belt conversion!
Post by: bis13 on July 29, 2007, 09:20:32 AM
the same things
Title: Fiat 126 rear inertia reel seat belt conversion!
Post by: phreak97 on July 29, 2007, 12:56:01 PM
then how come my air cooled has them?
Title: Fiat 126 rear inertia reel seat belt conversion!
Post by: bis13 on July 29, 2007, 01:48:00 PM
probably because of aus regulations or perhaps you just struck lucky that the previous owner was safety concious and fitted them . whatever they are there .
Title: Fiat 126 rear inertia reel seat belt conversion!
Post by: phreak97 on August 07, 2007, 12:46:30 PM
theyre definately stock, i guess that's a bonus of australian regulations then
Title: Fiat 126 rear inertia reel seat belt conversion!
Post by: Idle Steve on August 07, 2007, 03:47:41 PM
How are they mounted? are they in the same position as the ones I fitted on mine?
http://i201.photobucket.com/albums/aa65/IdleSteve/IMG_2472.jpg

Steve.
Title: Fiat 126 rear inertia reel seat belt conversion!
Post by: phreak97 on August 07, 2007, 11:00:35 PM
nope, mines air cooled. and the belt disappears into the plastic through a moulded slot. the whole plastic bits either side of the rear seat must be different for australia. ill look more closely thisafternoon, but i think that's correct. it definately goes into a moulded slot.
Title: Fiat 126 rear inertia reel seat belt conversion!
Post by: phreak97 on August 08, 2007, 12:57:40 PM
well the seatbelts dont go into the plastic like i thought, they have a little box added on the parcel shelf, still definately a factory item, both my nikis have them exactly the same.
(http://fiat126club.co.uk/forum/userpix/473_seatbelt_1.jpg)