Club126UK

Fiat 126 Chat => Fiat 126 Chat => Topic started by: Gadge on April 25, 2007, 08:14:13 PM

Title: my own buzz bomb
Post by: Gadge on April 25, 2007, 08:14:13 PM
heres my little one, he's in a bit of a state but when he's done he will be mint :D what do ya think, is it do-able (http://fiat126club.co.uk/forum/userpix/126_126_1.jpg)
Title: my own buzz bomb
Post by: 126dave on April 25, 2007, 08:18:29 PM
good on ya,its always do able,and its nice to save one,go for it!!!
the one ive just started was just one ignorant owner away from the scrappy,luck was it came my way........mint ones will always find a good home,its good to save the runts !!
Title: my own buzz bomb
Post by: Gadge on April 25, 2007, 08:31:11 PM
its not gonna be easy, got my work cut out!
Title: my own buzz bomb
Post by: 126dave on April 25, 2007, 08:36:11 PM
plenty support here,and sunday nites you can come to confession with the loonies  :smt003
Title: my own buzz bomb
Post by: Gadge on April 25, 2007, 08:39:52 PM
trust me i got plenty to get of my chest!!! bloody things costin me an arm and a leg in bits!! ebay loves me!
Title: my own buzz bomb
Post by: Chris Lakin on April 25, 2007, 09:07:31 PM
nice one gadge looks good!

Chris
Title: my own buzz bomb
Post by: Gadge on April 26, 2007, 05:05:07 PM
gonna need some body work doing, this is too far gone to repair so it'll have to be replaced
(http://fiat126club.co.uk/forum/userpix/126_dent_1_1.jpg)
and i bet i'm not the only 126 owner to suffer from this!
(http://fiat126club.co.uk/forum/userpix/126_headlining_1.jpg)[/img]
Title: my own buzz bomb
Post by: bis13 on April 26, 2007, 05:15:35 PM
that light will push out thats not too bad you will be suprised !

as for the headlining pull it out and make your own its far easier.

if you need any bits for your bis give me a list as i have a broken one , i also have two engines should the need arise.
Title: my own buzz bomb
Post by: Gadge on April 26, 2007, 05:37:35 PM
cheers mate might take u up on that i need all sorts, the headlining, like most of the interior will be replaced, i was thinking of cinq sporting seats if they'll fit?
Title: my own buzz bomb
Post by: 126dave on April 26, 2007, 05:59:42 PM
go easy on the front panel,you can use a small sissor jack to get wat looks like the seam back out straight,then the rest will be easy.

if you remove the roof linning,strip the foam crap off,then just re use the hard board with some carpet or wat you fancy,if its bowed down,wet it,then leave it on the TOP of the car roof to re form to shape.

seats? anything will fit if you try hard enough!!

 :D
Title: my own buzz bomb
Post by: bis13 on April 27, 2007, 08:47:50 AM
i know the runners for the cinq are wider so you have to either weld in the wider rails or adapt the seats to fit the 126 rails either way you can with a bit of playing around.
Title: my own buzz bomb
Post by: Gadge on April 27, 2007, 05:18:00 PM
yeah i might adapt the cinq seat to fit the 126 runners, i'm sure it can be done