Club126UK
Fiat 126 Chat => Tuning & Customising 126 Models => Topic started by: michaelodonnell500 on April 22, 2007, 05:21:20 PM
-
I have been working on a disc conversion for my fiat 500. I'm currently runing on 126 FSM brakes and 12" wheels.
I purschased a set of calipers and carriers for a Fiat 125 (same as x1/9)
I've made up a template for the adapter plate and worked out what spacers needed to go where and am happy with it at this point.
However, the problem occured when i tried to fit the wheel. It doesnt fit! I could resolve this problem with some hefty spacers or 13" wheels (incidentally i tried a bis wheel and it slots straight on)
First point I have to make is dont try this type of caliper if you want to use 12" wheels!
Secondly - Has anyone had any success using the 12's and if so which caliper/ kit works best.
Thirdly - I will be selling these parts on as they are no more use to me than paper weights. Sale comprises of:
1 set of Fiat x1/9 / fiat 125 caliper cariers, shotblasted;
1 set of Fiat x1/9 /Fiat 125 calipers (described on ebay as good working order, removed from car)
1 set of remanufactured Fiat x1/9 / IFiat 125 calipers.
1 backplate template.
All clips and runners for carrier/caliper
Plus any advice on how I got to this point.
Total: £50
I live in Ashford Middlesex, but dont mind driving a little bit to meet you.
The backplates can be bought from a polish firm listed in the last disc brake thread for around 10 euros aside, or you can make them from the template.
-
i appear to have ford fiesta calipers on mine,supplied from ruuds rugshack,dont ask me what model/year,and im dreading pad time,we fell out over some dodgy discs/engineering,anyhoo,alls well now,and they JUST touch on 12's,i reckon just a touch with a grinder on the excess meat on the caliper would do the job,im going to do it,as i want a 12 as a spare,and may go back to 12's with minilights or summit
-
Hey there Michael,
I believe I have purchased the same calipers as you and have had the very same problems regarding fitting (or rather not fitting) into the 12" wheels. Unfortunately I bought mine from Italy and cannot do aything with them now, so will eventually fit some 13"s.
Incidently, I live just round the corner from you in Walton-on-Thames, so we will have to link up sometime and share knowledge
Dom
-
I never realised there was another 500 owner so near! It would be good to meet up. I'm a little busy for the next few weekend. I've sold my welding skills to a freind with 2 seives for sills on a Daf 66, in exchange I'm getting a mig and a few other bits and bobs, so I cant complain!
I had been toying with the idea of 13 wheels, but personally, i got thinking that I'll be changing a few too many things for the sake of discs.
Lesson learned for me I suppose!
Michael
-
i appear to have ford fiesta calipers on mine,supplied from ruuds rugshack,dont ask me what model/year,and im dreading pad time,we fell out over some dodgy discs/engineering,anyhoo,alls well now,and they JUST touch on 12's,i reckon just a touch with a grinder on the excess meat on the caliper would do the job,im going to do it,as i want a 12 as a spare,and may go back to 12's with minilights or summit
Thanks for the reply. I seen the Ruud kit on Hudson Henrys 500 so im guessing it must be the same. He should have an idea of what pads you need. I should have asked him a few more questions about his while i was there, as it looks like I'll be taking a similair route!
michael