Club126UK

Fiat 126 Chat => Fiat 126 Chat => Topic started by: nrg19uk on April 17, 2007, 08:55:58 PM

Title: guess what ive got finally
Post by: nrg19uk on April 17, 2007, 08:55:58 PM
(http://fiat126club.co.uk/forum/userpix/100_17042007158_1.jpg)
(http://fiat126club.co.uk/forum/userpix/100_17042007161_1.jpg)

well i got to work pulling it apart wires were in a mess batt flat starter motor needed cleaning up fuel pump not working very well carb needs cleaning.

and i managed to get it started :P


needs new coolant hoses, new roof, new ht leads and plugs, new fuel pump new seats and carpet. indicator stalk electrics needs looking at  needs a few patches of rust sorted here and there a good clean and polish rubbers here and there changing,  new tyres, new wipers, new airfilter, new fuel hoses


can i do away with the mechanical fuel pump and use a electric one?
Title: guess what ive got finally
Post by: Chris Lakin on April 17, 2007, 08:58:28 PM
wow, mate thats really not going to take much to get it straight.

if i didnt have so many of the buggers i would have snapped it up, i was so tempted.

keep mech fuel pump, but yes many kits out there for electric pump, they were selling them at this kit car show at weekend.

regards

Chris
Title: guess what ive got finally
Post by: 126dave on April 17, 2007, 09:00:52 PM
just a few bits then mate!!............looks good,plenty of dead bis around,parts should be no problem,just buy a complete dead one and doner it.....
yes a lecky pump is the way to go,a ''puller'' type SU from a morris minor woud do nicely,i hav a Facet one on mine to pressurise the weber (40 dcoe) correctly
Title: argghhh
Post by: nrg19uk on April 17, 2007, 09:07:39 PM
what pressure are they?
Title: guess what ive got finally
Post by: 126convert on April 17, 2007, 09:58:08 PM
that looks familiar...
Well done on getting it going. As 126dave says, get a dead rotten bis and just swap all the bits over! Another good days work with a second pair of hands and I reckon it'll be MOT'd and ready for the summer..

Stu
Title: heheheh
Post by: nrg19uk on April 17, 2007, 10:07:17 PM
hehehe

most of the bits that need replacing are fairly cheap anyway i think, so might just buy new parts if i can, it might work out better in the long run. looking in to buying a new roof also just trying to find a place that sells them if not i will have to get one made.
Title: guess what ive got finally
Post by: 126convert on April 17, 2007, 10:18:45 PM
I was certain I found a place on the net offering fiat 126 convertible rooves, but couldn't find it agian !
At least the frame is good, and the original (if mucky) canvas can be used as  a pattern if needs be. I already tried ot ring the place that sold the car, but they stopped selling Fiats about 12 years ago.
One thing I couldn't inderstand. Why converty a car with cloth seats, when vinyl ones are available?
Title: yup
Post by: nrg19uk on April 17, 2007, 10:21:57 PM
i was thinking of using that as a template and get a nice mohair one made properley cost same as car lol
Title: oww
Post by: nrg19uk on April 17, 2007, 10:34:49 PM
new bonnet
Title: guess what ive got finally
Post by: bis13 on April 17, 2007, 11:47:45 PM
if i am about sunday you can come and look on my scrap bis for any bits you might need , just let me know. mick
Title: guess what ive got finally
Post by: fiatfsm on April 18, 2007, 09:19:52 AM
nice find, and just what you need now its so warm and sunny.
Title: yippp-pieeeeeeeeeeeeeeeee
Post by: nrg19uk on April 18, 2007, 05:27:44 PM
you never guess what!!!!!
















i drove it round the block!!!!!!!!!!!!! i havent stopped smiling i noticed a tiny hose that was off the carb put it back on ticks over lovely!!!!!!!!! drove round the block and over heated steam every where!!! need new hoses and seals round the thermostat(http://fiat126club.co.uk/forum/userpix/100_18042007168_1.jpg)
(http://fiat126club.co.uk/forum/userpix/100_18042007170_1.jpg) im well happy hehehehehehehhehehe can you guess whats gonna happen? started stripping the baby down plenty or sanding to be done