Club126UK

Fiat 126 Chat => Tuning & Customising 126 Models => Topic started by: 126dave on March 26, 2007, 08:00:11 PM

Title: panda oil seals
Post by: 126dave on March 26, 2007, 08:00:11 PM
any idea where i can get some oil control valve seals for a panda head?,they look to be a nylon top hat with spring insert,mine are knaked ...do the 650 ones fit?

i looked at gerstl site nowt ther that i can see.......
Title: panda oil seals
Post by: 126dave on March 27, 2007, 07:00:42 PM
ok guys,axle just answered me,they do not supply those seals,so im calling on the squadra 126/darkside to help me here,any ideas/links for panda bits???????
Title: panda oil seals
Post by: bis13 on March 27, 2007, 07:22:46 PM
take a photo of one and post it then i will have a better idea of what your looking for
Title: panda oil seals
Post by: 126dave on March 27, 2007, 07:27:33 PM
cant,A there too small for my cam,B they are too far gone to show any reference,they are white nylon,fit tight over the inlet valve guides with a spring /petrol/hose style clip to hold them,and they have an internal spring to give a close seal to the valve stem.............
Title: panda oil seals
Post by: 126dave on March 30, 2007, 01:03:33 PM
found some! i have some spare if anyone needs some for a panda head rebuiled........they are the same as the early 4 cylinder panda  :wink:
Title: panda oil seals
Post by: bis13 on March 30, 2007, 05:37:20 PM
you get so excited !! where did you find them?
Title: panda oil seals
Post by: 126dave on March 30, 2007, 07:08:59 PM
i found a guy who rebuileds 850's using early panda gasket sets,he has the seals left over........sent me some to see if they the same....and yes,without sounding too excited,they are....... :wink:
Title: panda oil seals
Post by: bis13 on March 30, 2007, 08:26:29 PM
i can imagine you with the seals all seated around the table with you dancing around with a lobster in one hand and a verre du vin in the other!!
i have a question do you talk to your car?  :lol:
Title: panda oil seals
Post by: 126dave on March 30, 2007, 08:31:54 PM
have you bugged my workshop?............of course i talk to blue bell.............and also apologise to buzzbomb 1 who sits in the corner...and yes,the new seals are on the kitchen table as i type this...............two part moulding,top quality work,a hard lower section to fit on the valve guide,and a more supple top with a miniture spring to grip the valve stem....lovely.......
Title: panda oil seals
Post by: bis13 on March 30, 2007, 08:42:34 PM
dont type with one hand down your pants young man!!
Title: panda oil seals
Post by: 126dave on March 30, 2007, 08:48:07 PM
jez,you got my kitchen bugged as well?? :shock:
Title: panda oil seals
Post by: bis13 on March 30, 2007, 08:55:15 PM
and youve named your car thats pityfull....
Title: panda oil seals
Post by: 126dave on March 31, 2007, 06:51:28 PM
my somewhat deliceous (female) boss gave it that name.......she mad at me now because of the orange wheels.....................asked what i had in mind for ''poor little bluebell''.the name has stuck.......
Title: panda oil seals
Post by: bis13 on March 31, 2007, 10:12:19 PM
you should have named it stuka that would have gone down well!!