Club126UK

Fiat 126 Chat => Tuning & Customising 126 Models => Topic started by: Dom on January 30, 2007, 08:23:33 PM

Title: Disc brakes
Post by: Dom on January 30, 2007, 08:23:33 PM
Anybody selling any disc brakes for 500/early 126? Is there even a difference between the early and later ones as it replaces the hub right?

Where is the cheapest place to get them? My brakes are getting pretty bad, and I thought i'd be better off upgrading to discs, than replacing the original ones.

Chris, you mentioned something about uno callipers? Is there a thread about this already?
Title: Disc brakes
Post by: Chris Lakin on January 30, 2007, 09:19:43 PM
hi dom, hows the body work? did they do a good job?

right here is the company someone told me they got the disc conversion kit from, apparently you can buy the conversion kit for like £40 then go and buy the uno calipers from elsewhere. its worth emailing them and see what theyve got.

http://www.blitzworld.co.uk/content.php

regards

Chris
Title: Disc brakes
Post by: Chris Lakin on January 30, 2007, 09:21:34 PM
http://www.blitzworld.co.uk/content.php?categoryId=84

(http://www.blitzworld.co.uk/images/diskbrake.jpg)

thers the kit coversion

but just remembered though, will be different for the 500, different PCD give them an email and ask if they do a kit for the old 126/500 hub type

Chris
Title: Disc brakes
Post by: 126dave on January 31, 2007, 07:37:24 AM
its a worthwhile conversion dom,im happy with mine,id be carefull of building some from random bits,the master clyinder is only used to wheel cylinders,the calipers/fluid capacity have to be carefully matched,mine appear to be ford fiesta ones,and the pedal travel and braking affect remain the same as for the drums,albeit it firmer and more repeatable stopping power,if you pm me i'll give you some more info about certain companys that supply them.
Title: Disc brakes
Post by: Marek on February 01, 2007, 12:44:15 AM
hey that's brilliant, i was going to query about brake conversions - still working on electric windows and a tacho :D

just to confirm so i am not confused,

http://www.blitzworld.co.uk/products.php?productId=44
will provide the kit needed to do a front disc conversion for fiat 126/fsm niki that is shown http://www.fiat-furious.pl/html/tuning_a/ham_tarczowe_v2_126/ham_tarczowe_v2_126.htm here

all we need to do is provide the disc brakes and calipers?
Title: Disc brakes
Post by: hudsonhenry on February 01, 2007, 09:54:20 AM
I would not use the blitz kit, for your money you only get the backing plates and in my opinion they are made of far too thinner metal (about half the thickness of the other kits I have seen or used), a friend bought a pair and decided that the only thing they were good for was to use as a template to get some propper thick steel cut.
Title: Disc brakes
Post by: hudsonhenry on February 01, 2007, 10:11:20 AM
If you want to make your own from a kit try this company:

http://www.trs-racing.yoyo.pl/hamulce%20przod%20126p.htm

One of the Polish speakers here might be able to help you withy translation

Nigel
Title: Disc brakes
Post by: Dom on February 01, 2007, 01:06:48 PM
When fitting disc brake kits, are there any other modifications needed, such as wheel cylinders, brake lnes and the master cylinder? or do you continue to use the original parts for these?
Title: Disc brakes
Post by: 126dave on February 01, 2007, 05:09:10 PM
a decent kit should come with refurbished kingpins,new/refurbed hubs and bearings,quality new back plates, calipers and discs,mine was from ruuds rugzak garage in holland,i used (new)standard 126 flexis,the original master cylinder also coped with the increase in fluid capacity,all your drum bits go in the bin dom  :wink:

so if you change to later pcd all you then need is change the back hubs to suit :cool:
Title: Disc brakes
Post by: Dom on February 08, 2007, 11:03:50 PM
New disc kit ordered today. Cannot wait to drive without having to plan when I will have to stop so long in advance!
Will post up some pics of the kit when it arrives, so you guys can tell me what it's missing...
Title: Disc brakes
Post by: ger on February 08, 2007, 11:29:46 PM
Hi Dom,

Who did you order from?? I'm ordering a minimal kit for my 500 from TRS today. Based on Seicento disks and calipers.

Guys have been VERY helpfull with information, pics etc.

I'll be supplying my own 126 uprights\hubs etc.

Cheers
Gerry
Title: Disc brakes
Post by: Chris Lakin on February 09, 2007, 01:59:12 PM
http://cgi.ebay.co.uk/FIAT-500-126-FRONT-DISC-BRAKE-CONVERSION-KIT-NEW_W0QQitemZ190081342489QQihZ009QQcategoryZ31352QQrdZ1QQcmdZViewItem#ebayphotohosting

over priced would you say?

regards

Chris
Title: Disc brakes
Post by: 126dave on February 09, 2007, 04:38:59 PM
jeeeezz,crazy price.................better from italian ebay or germany methinks
Title: disc conversion
Post by: DMB on February 10, 2007, 03:56:42 PM
Dom, Where have you ordered your disc brake kit from? Are you able to tell me the cost? I am after a conversion myself.
Cheers Dave
Title: Disc brakes
Post by: nitro_trs on February 11, 2007, 09:32:31 AM
Hi guys.
I invite on my www page http://www.trs-racing.xt.pl

Fiat 126 swaps brakes, engines ect...
Title: Disc brakes
Post by: Pete126 on February 11, 2007, 10:47:32 AM
Hi Nitro, do you have any pictures of the disc conversion you can upload cause i can't find them on your site, also the price and shipping costs to the U.K.

Thanks
Title: Disc brakes
Post by: ger on February 11, 2007, 11:48:40 AM
Hi All,

Guys at TRS been very helpfull for me, answering all my dumb questions.....

Cheers
Gerry
Title: Disc brakes
Post by: nitro_trs on February 11, 2007, 11:53:28 PM
Pictures are on my site. Choose section " OFERTA ". English version is not completed yet.

P.S.I'm sorry for my english :)
Title: Disc brakes
Post by: ger on February 12, 2007, 07:47:15 AM
Hi Pedro<
I have 2.5mb of pics sent to me my the TRS Guys showing the installation, can forward if you like...

Cheers
Gerry
Title: Disc brakes
Post by: Pete126 on February 13, 2007, 05:42:43 PM
Hi Gerry, that would be great. i will PM you. Thanks....
Title: Disc brakes
Post by: bis13 on February 13, 2007, 06:51:04 PM
do you think you can post these up in the tuning section for us all to use as a guide . ta mick
Title: Disc brakes
Post by: ger on February 13, 2007, 11:05:49 PM
will do Mick !
Title: Disc brakes
Post by: bis13 on February 18, 2007, 11:24:41 PM
(http://fiat126club.co.uk/forum/userpix/212_100_0979_1.jpg)
(http://fiat126club.co.uk/forum/userpix/212_100_0980_1.jpg)

this is the discs i have , they are 125 based (polski fiat/polonez), a nightmare to work out but got there in the end , now for a nice refurb and they will be fine...
Title: Disc brakes
Post by: jpimpao on February 19, 2007, 01:02:14 AM
Hi,
Is there any English version of this Webpage.
Thanks
Title: Disc brakes
Post by: bis13 on February 19, 2007, 09:02:20 AM
he is working on it .
Title: Disc brakes
Post by: Marek on February 21, 2007, 05:35:30 AM
I just sent a request for a quote for all parts that I'll need

I just hope postage to Australia won't cost the same amount :(
Title: Disc brakes
Post by: ger on February 21, 2007, 10:44:08 AM
My TRS bits were posted this week.....
Title: Disc brakes
Post by: nitro_trs on February 21, 2007, 11:38:56 PM
Hi guys!
I apologize for delays in answering on questions very. Now work mum have a lot. I must complete work at this car on time
http://www.trs-racing.yoyo.pl/126el%20pabianice.htm

Please, about else a bit patience.


I salute
Title: Disc brakes
Post by: Marek on February 22, 2007, 12:26:09 AM
czesc,

good luck with the car, hope you get it out on time :)

Marek.
Title: Disc brakes
Post by: nitro_trs on February 22, 2007, 07:04:57 AM
Car is almost ready. I think, that possible receipt will be to saturday.
Engine 1.2 8V 75 PS :D
Title: Disc brakes
Post by: hudsonhenry on February 22, 2007, 09:51:31 AM
Quote from: "nitro_trs"
Car is almost ready. I think, that possible receipt will be to saturday.
Engine 1.2 8V 75 PS :D


Looks good, did you do anything to the gearbox to make it stronger? I see that you have gound away some of the inner bellhousing on the gearbox, does this now clear the stock 75 flywheel? on my conversion I used a Fire 1000 flywheel and clutch as its slightly smaller.

Nigel

www.retro500.com
Title: Disc brakes
Post by: nitro_trs on February 23, 2007, 11:59:11 AM
I remove inner bellhousing on the gearbox for bring closer engine to gearbox. Flywheel is modificated and remaked from original flywheel. Cluth disk and cluth plate are from Cinquecento 900.
Title: Disc brakes
Post by: Dom on March 21, 2007, 09:23:51 AM
This is the exact disc brake kit that I have, unfortunately, I had to do a little grinding of the hubs to get the discs to fit.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=290091184610

What else will I need to actually fit the brakes to the car? Will i need to buy new flexi pipes? (what type and where from?) Can anyone tell me what car these calipers have come off. I think it may be a fiat uno or panda. Also, where exactly do the pipes go? There are two holes per caliper.

Thany yous
Title: Disc brakes
Post by: bis13 on March 21, 2007, 03:06:36 PM
you have a big hole on top thats for the pipe connection , then a smaller hole next to it that is the bleed valve and on the front usually is another hole that is for a pipe clamp.they look pretty much like what ive got and they are for a polski fiat( 125?) the old yugo/lada thingy.
Title: Disc brakes
Post by: Dom on March 21, 2007, 08:04:00 PM
Cheers Mick,

What will I need to buy in terms of the pipes? Is there a standard type, or will I have to order some specialist 500/126 one?
Title: Disc brakes
Post by: 126dave on March 21, 2007, 08:20:33 PM
hi dom,these are different calipers to mine,mine are ford items,and the normal 126 flexis fitted fine,did your kit not come with bleed /banjo connections??.

the 126 hubs seem to come in slightly diff sizes,thats why you had to grind yours a little,make sure the disc fits flat to the hub surface before tightning the wheels up,the discs WILL destort if not,i gave my hubs a slight chamfer then lapped them to the discs with some coarse grinding paste.my kit had already been botched,(hubs butchered) and i had to re seat the replacement discs on my slightly gound down original hubs,also,the new back plates touched the gaiters on the track rod ends,check yours are ok,i had to grind a small amount of steel away for clearence.....OH,and check the caliper fixing bolts are not too long,mine were,and were going to gouge big troughs in the new discs................................................. :evil:
Title: Disc brakes
Post by: Dom on March 22, 2007, 03:57:07 PM
Good stuff.

Are the standard 500 flexipipes already on, likely to fit the new calipers? Im not sure what flexis to get if thay dont, as i'm not sure if modern pipes have the same connections?
Title: Disc brakes
Post by: bis13 on March 22, 2007, 04:53:37 PM
they should fit ok theres only one way to see and give them a try , put them on and get your brother to lay under the car looking to see if they leak. press the brakes on and off plenty of times , if he comes up covered in fluid sreaming he cant see it means they need replacing if he just stays laying there quietly he s gone to sleep cos they are fine but boring.
Title: Disc brakes
Post by: 126dave on March 22, 2007, 06:06:17 PM
dom,try asking the supplier of your kit for the correct parts,126 flexis have a banjo style at the wheel cylinder end.and dont forget the soft copper washers eh??.gota dash,first coat of repsol orange going on my wheels tonight..............
Title: disc project
Post by: michaelodonnell500 on April 11, 2007, 12:52:34 AM
Hi.
I'm on the way to getting front discs on my 500 (Steering rack conversion is also on its way, may as well do a few things while I'm down there!)

I've gone for the Fiat 125 route as I'd rather have the 227mm discs than the 240, mainly because I've already bought them!
I found a set of Fiat X1/9 front cailpers with mounting rails for a reasonable price so that will be my starting point. I think I'll make the plate up myself (anyone know how thick the adapter plate should be?) I've most of the tools here, and a steel yard only down the road.
While cross referencing the discs I came across ATE Brakes http://www.conti-online.com/generator/www/com/en/ate/ate/general/home/index_en.html

Very good for finding comapritive donors. I spotted theat the Cinq and Seicento match the centre diameter of the of the hub 59mm with 123mm inner disc diameter so no need to re shape the hub and a snug fit . The Fiat 125 is 62mm hub with 117mm inner disc diameter. This means the hub is a very loose fit, but the inner disc is a little too snug which allows disc/hub alignment once the hub is trimmed a little.
Lots of info on this site as they give dimensions most sites leave out. More importantly it gives a list as long as your arm of related vehicles which is very handy for the odd ebay purchase!
Curently overhauling the kingpins to go with the new front bearings,
to go with the disc conversions,
to go with the steering rack conversion.
Who said men can't multitask!
Title: Disc brakes
Post by: Chris Lakin on April 11, 2007, 01:09:12 AM
blimey youve been busy mate

everyone at this point seems to have their own method of going about geting disc breaks,

x1/9 calipers must be same/similar to the uno ones which are commonly used?

regards

Chris
Title: Disc brakes
Post by: Dom on April 11, 2007, 10:55:46 AM
I still have my disc kit sitting in the front room at home. Working on fixing the old drums and getting the car back on the road before I start meddling with new wheels and the discs. Been messing it up far too often, so right now I just want to drive!

When is the next meeting in the Londonish area scheduled for?