Club126UK

Fiat 126 Chat => Tuning & Customising 126 Models => Topic started by: Tommy D on July 26, 2006, 12:19:19 AM

Title: 150 ish Bhp
Post by: Tommy D on July 26, 2006, 12:19:19 AM
hey peeps, i am a novice with the 126 so bear with me.

Id like to know what engines fit the 126, or what boost the standard engine and crank can take as i was thinking of boosting one.

Id like the car to handle well, be quick on accell. Iv seen clips of some 126's shifting. Will a Bike engine swap over ok? Id like to ditch the 600cc standard engine, and drop in a 1.0L plus boosted one...

Any reccomendations you guys have would be great. I also think they have drums all round, does anyone make 4pot callipers and rotors?

Also what wheels can i get id like 10-12" deep dish wheels if possible, suspension (coilovers?) links would be great? thanks for reading.

If i have frustrated anyone with my lack of knowledge it is because i have not brought the car yet and i wanna weigh up potential as i always get my cars to show level asap.
Title: 150 ish Bhp
Post by: Chris Lakin on July 26, 2006, 12:59:11 AM
mate i see it  time and time again. "im gonna buy a 126 and lump a v8 in it and a turbo...will be easy" months later car is back on ebay, or being scrapped because the person has mucked up the project or"needs the space" If you want speed dont bother with a 126 go and buy a nice 1.1 ford fiesta. (they even do those flashing washer jets for them, fake dump valves, and those £50 resistors that add 15bhp)

If you are not a highly skilled mechanic with spare time and have the patience, forget it, you will need to be a millionaire.

sorry to be blunt but its the way it is! :wink:  

p.s you will enjoy a 126 more with a standard engine.
Title: 150 ish Bhp
Post by: hudsonhenry on July 26, 2006, 01:12:38 AM
The most power (without spending a fortune) you will get out of the 650 twin is around 35-40bhp at the wheels. Most tuned 500s, 650-700, panda 30 head, decent carb, sports exhaust and cam will put out around 30 at the wheels – about 35 at the flywheel. The fastest racing engines are getting up to 65-70 at the flywheel but you will need a steel crank and rods and the engine will need to be revved beyond 7500 rpm and will therefore need to be rebuilt every few thousand miles and will have no bottom end power.

There have been several bike conversions and the light weight of the 126 makes it an ideal candidate for this, the biggest problem is the lack of reverse or the cost of a reversing diff, and the potential loss of the rear seats.

If you have a look at this site: http://www.126fan.pl/

They feature conversions from 1050 pushrod fiat Uno engines, Uno turbos, Fiat fire engines and even a wheelie pulling 1.9 VW turbo diesel engine.

I have recently fitted an 1108 Fire engine from a Seicento Sporting into my 500 attached to a 126 gearbox. It sticks out a bit at the back of a 500 but I think it fits under the engine cover of the longer 126. These 1108 or 1242 engines can be tuned to over 100bhp at the wheels quite easily and if you can find an all alloy 1368 from a new Grande Punto then 150bhp will be quite easy to get (that would give you a power to weight ratio of about 300bhp per ton) You would need to strengthen the gearbox but parts are available – I am researching this at the moment myself.

I have a conversion kit for the 126 box to fire engine that I might sell for the right price ( I made two of everything when I did the bits for mine). I also have the tuned 650 that I took out of my car that was rebuilt about 5000 miles ago. I am planning to sell this soon as well.

Good luck

Nigel
Title: 150 ish Bhp
Post by: slammed 66 on July 26, 2006, 03:18:59 AM
I can see im going to get burned quite badly here  :lol:
Title: 150 ish Bhp
Post by: 126dave on July 26, 2006, 05:28:42 PM
heres my tuppence worth,if your going to re engine a 126,choose a bis,they mostly have knackered motors anyway and can be bought for nowt with headgasket failure,please leave the aircooleds alone.

then if the magic project doesnt come off,another aircooled is saved.

either of the cars will require lots of a,patience,b, money,.with that kind of wishfull BHP,your gna have to start with a mint body,then seam weld it,then fabricate subframes etc etc etc etc etc..........................and after all that your still gna have to sort handling etc......and,then, any hot saxo at tescos will still be quicker.........

i look forward to another super tuned 126 hitting the road rather than ebay in bits tho,let me know how to get rid of my bumpsteer and i'll be forever in your debt.
 :cool:
also,nice to have someone posting!
Title: 150 ish Bhp
Post by: dajwid on July 26, 2006, 09:08:57 PM
Cor! you don't know nothing about tuning.
I've got the engine in, sounds great, the original gearboxes are pretty tough so should manage, I've changed the front brake shoes to Halfords ones. They give more stopping power. Handling was easy just cut a bit off the rear springs with an angle grinder. I put 3 bags of cement mix in the front to keep her on the road.
I guess I have about 900 BHP looking for a Nos kit next push it up to about 1500Bhp

(http://i7.photobucket.com/albums/y284/dajwid/madmaluch.jpg)

Beat that!!
Title: 150 ish Bhp
Post by: 126dave on July 26, 2006, 09:19:51 PM
nice,very nice,at least that dream made it into reality eh? LOL  :lol: still reckon my knobend tuning nova would beat it...init?...of course,i would be wearing my (stolen) nomex 'hoodie' if i were to race you,safety first,i nearly died when the neons on/under my maxpower saxo went up in flames.............................................. :cool:
Title: 150 ish Bhp
Post by: Chris Lakin on July 26, 2006, 10:18:06 PM
hhaha :D:D:D:D

hilarious stuff,
Title: 150 ish Bhp
Post by: PaulB on July 27, 2006, 07:39:56 PM
Just how fast do you want to go? While the Fiat 500 is a little lighter and more aerodynamic, the highly tuned Abarth 695 SS was racing at over 110mph with a mere 38 bhp.

This is just a personal point of view, but I think ramming a huge lump into a 126 is like scrapheap challenge - it will be a great laugh getting there, and the car will probably be a real laugh if it actually moves at all,  but the end result is going to be a bit of a novelty - a rod.

The other route is to follow Abarth and others and squeeze as much as you can by tuning a stock 126. Just as much fun, but the end result (for me anyway) would be much more satisfying.

On the welding up the bodywork, I'm no expert, but wouldn't a seam welded body handle like sh*t as it will be as stiff as a brick?

On bike conversions,  from what I've read, most attempts at bike engine swaps have been disappointments. There is often a lack of torque, and there are also good reasons why cars are not chain driven - the chain is more likely to snap than the car is to move.
Title: 150 ish Bhp
Post by: 126dave on July 27, 2006, 08:11:50 PM
hey paul......evryone to there own,but,i agree,the 126/500 in my little opinion is better with the old scool style of modding....but then,im just an old git,an i like the way my buzzbomb goes and sounds.
i can see the need for more ooomph,id like it sometimes,but i cannot get away from the feeling that water cooled 4 cyl motors just dont belong............BUT,and its a big J'LO sized one,it must be nice to have that extra BHP sometimes eh?.........................
Title: 150 ish Bhp
Post by: PaulB on July 27, 2006, 09:25:51 PM
It really is each to their own and I'm not trying to say that big lumps are bad - but they do produce frankenstein cars. Fun, but frankenstein.

What I'd really, really like is a decent gearbox :D
Title: 150 ish Bhp
Post by: 126dave on July 28, 2006, 07:10:19 PM
i agree,that would be money well spent,to make the use of the 30 bhp...........i think 1 way forward tho for beter shifts,is a lighter flywheel,im going down that route,been chatting to Ruud,and he can supply a lightened balenced one.........i may even try the Bis driven plate in it this time(bruce).and i think i'll fit an light alloy fan as well
Title: 150 ish Bhp
Post by: PaulB on July 28, 2006, 08:18:58 PM
It will be interesting to see how that goes - do you know the weight? I've seen that Pasquale is selling a 3.8kg one. I'm too chicken for that.

I can handle the grumpy change, its the high revs at speed I want to deal with. I regularly drive long distance and 5th gear would help the engine a lot. I need to find out if 5th gear kits will do the trick, or just move fourth down, if that makes sense. There is room for improvement with a 5th as 4th isn't quite straight through 1:1

There's the BIS crownweel/pinion option, but I'm not sure how much I'd loose torque-wise, so may end up changing down more. I think a Panda head would be essential for that - mines still sat around along with a heap of other bits of engines....
Title: 150 ish Bhp
Post by: Tommy D on July 29, 2006, 11:11:47 AM
Hey guys thanks for the feedback, i have looked inside and i can see the engine cooling fan runs onto the inlet duct, almost as if the engine is very mildly supercharged.

As for a few comments about buying Fiesta etc, I have a Tuned 220bhp Mazda originaly 133bhp with a Turbo Conversion going on, iv already swapped engines and stripped with Forged internals, also im geting a R32 Skyline and dropping in a RB26 GTR engine, setup to 500Bhp for drifting. Im compitent enough to do something on the little fiat. Having a closer look around the car i think i'll keep with std engine for a bit. Iv now decided that i think a R1 or 1.3GSXR Hayabousa engine will be sufficient, i think ill have to chop the rear bulkhead slightly, i may remove rear seats completely. I'll lower the compression so i can run sufficient boost too.

Thanks for the feedback guys, im getting the vibe that a few on here are not quite convinced.

What ill do is do it and ill post up my progress along the way. I think the cars are classics, im aware they are classics so i will be honest from the outset. I want the car looking clean and original from the outside with chrome bumpers etc, but the interior will be a different story. Due to the nature of these old classics, original parts that i am not using or finished with, ie the two engines i have, interior, trim, wheels, etc i will post up and you are welcome too as i believe these little cars deserve to be kept in best possible condition and if i can help originals i will, if im not using it, its yours.  :cool: thanks
Title: 150 ish Bhp
Post by: 126dave on July 29, 2006, 01:39:48 PM
well, paul,i see what you mean,that does not really affect me at the mo,but will in K.L....i get the feeling 5 speed box will be in the  :shock: range of money tho...............as for the flywheel,i just asked  for a flywheel to suit the state of tune of my motor,i'll ask the weight tho.
you should really put that head on,if you ahve one fit it! :lol: i managed to keep all my tin work/heater etc with a bit of cutting etc,if you want any info on that drop me a line,i also have the die to make new studs if you want to borrow it at all.

Tommo!! sounds like your gona go for it!!....id still use a bis tho,no fire wall to get in the way,and you could have engine under perspex inside the hatchback............................... :cool:
Title: 150 ish Bhp
Post by: dajwid on July 29, 2006, 02:03:56 PM
Tommy the reason for the cold reception is that every so often there is a post from someone planning on getting '1000,000Bhp' from a 126.
We have seen them come and go.
I really wish you the best of luck, as I am sure most of the other members do.
I honestly hope the project gets finished and I get to see the pictures of the work  on the forum.
This is certainly the place if you need any help.
Title: 150 ish Bhp
Post by: Tommy D on July 29, 2006, 02:21:17 PM
I understand guys, im known for seeing things through. Iv lost count of how many people have said im going to do this and the following week they are like i dont know now! Those peeps waste time, i dont.

150bhp i can see is ambitious but i just threw it in to see what you guys do. I think 100Bhp is not too ambitious, 150 will require work, but im in no rush!
Im not sure what the one im getting is, bis? whats that? ill post pics, iv seen some subtle Abarth arches i like, just want some chrome dish wheels, iv already got Goodridge brake lines quoted and a Front Disc conversion planned, just to start with.

Im more of a Jap tuning guy and standalone mapping with larger injectors etc, back to carbs it all seems so easy! Its going to be fun! Ill keep u posted
Title: 150 ish Bhp
Post by: PaulB on July 29, 2006, 02:49:31 PM
Tommy - go for it - I'd love to see the end result. But do stick with the original engine for a while - 126s are underpowered by almost anyone's standards, but they are a real laugh to drive and you'll see how even a small boost in bhp will really give it a kick -its a gocart of a car. I guess its a whole different angle on driving - just like racing - whizzing around in a small car at its limits, or thudding along in a car that's always got more to give. Just noticed you're in Cornwall - I'm back down there umpteen times a year either in Millbrook or Helston (home town). When the project's further on, I'll drop by if that's okay?

Dave - i think a fifth gear is about £400 - I could make some of that back in saved fuel, but I'm not sure what I'm getting - more torque in 4th or more speed in 5th or both?!  English isn't Nanni's strong point. Maybe bob this in a BIS box for the best of both worlds?

http://www.fiat500sport.com/dettaglio.asp?a=0112&t=2&l=ENG&sku=2D925B38DC0
Title: 150 ish Bhp
Post by: Tommy D on July 29, 2006, 05:24:08 PM
I live Just outside Helston near Poldark mine. Its currently in a garage, the brakes dont work, so ill just get all new stuff, front disc upgrade is a must, then ill get it Mot'd....etc

I really want help with Wheels......Im getting the Arbarth Arch extensions too so offset wont be too much trouble, i havnt seen any pics with a Set i like, the style i want.....similar too

(http://www.ffcobra.com/FAQ/tiresa1.jpg)
(http://oewheels.net/oe-cobra-b-r-10-1-new.jpg)

any ideas anyone?
Title: 150 ish Bhp
Post by: 126dave on July 29, 2006, 05:48:33 PM
i can recomend Rudds garage for the discs........rebuilt kingpins,brand new calipers on custom drilled discs,very tasty.................and would recomend pasquale for 30mm lowered suspension and 30% uprated shocks...........as for wheels...the top pic looks like halibrand style to me
Title: 150 ish Bhp
Post by: Tommy D on July 30, 2006, 02:30:49 PM
Hmmm, iv also seen some tasty exhausts online, Halibrand? what are they?

Iv already mailed that Rudd guy couple of days ago, already gettin him to hook me up with info, prices, parts, just gotta get car moved into in a garage and get it pimped up!

Im gunna take before and after pics, see what u guys think.

It seems that there are not many sites where i can get the kind of things i want. Is there any good sites, chrome bumpers are a must, where can i get clear rear lights?  

Iv looked on Google etc but theres lots of crap, any head starts are greatly apprechiated, thanks guys
Title: 150 ish Bhp
Post by: 126dave on July 30, 2006, 06:39:27 PM
eerrr........Halibrand are one of the most respected wheel manufacturers.....fitted to GT 40's shelby cobras etc as standard kit...................

pimped up,?oh dear,i think my input stops here.........................good luck

 ''Im getting the Arbarth Arch extensions too ''
 its ABARTH not ARBARTH................
Title: 150 ish Bhp
Post by: Chris Lakin on July 30, 2006, 07:30:41 PM
iz gonna get me car pimped up innit! wiv phat arbarff arches man!

(http://www.topgear.com/content/timetoburn/sections/carbage/pages/0490/main.jpg)

me saxo has pimped up wheels and spolier which makes me go fasterer, i fink u sud get the same wheels innit Tommy they look bling.

:lol:  :lol:
Title: 150 ish Bhp
Post by: 126dave on July 30, 2006, 08:35:39 PM
oh dear oh dear.............wheres my hoodie.......................
Title: 150 ish Bhp
Post by: Tommy D on July 31, 2006, 01:25:56 AM
Ok, some of you on this site are cool, so this is not aimed at you!
as for others.....What is your problem, these cars are supposed to be fun, i was messing about when i said Pimped up........If you take these cars seriously then fair enough, but part of the appeal has to be that they are fun cars and have such appeal due to their un serious nature. If you have nothing constructive to contribute then dont.

So what if i spelt the arch manufacturer wrong, or dont know what wheels they were, i asked politely and got sarcastic answer! I have no experience in the custom 126 world as i have expressed, however the guys i know into cars are not stuckup and happy to help out without making an issue.

Thanks to those who have helped me build a better picture of what is involved, as for those who clearly have nothing more to do, u have sucessfully lost a member from this site. Ill go through Rudds for all my needs, he seems friendly and clued up, take care.
Title: 150 ish Bhp
Post by: fiatfsm on July 31, 2006, 09:01:28 AM
oh dear, toys, pram.... good luck with making a sad looking 126 :lol: .... innit!
Title: 150 ish Bhp
Post by: Chris Lakin on July 31, 2006, 10:53:01 AM
Tommy, firstly sorry for taking the piss m8, i wouldnt usually do that (must be the hot weather  :lol:) its up to you what you do with your 126 and i will respect that its just not my cuppa tea, i was too hasty in making my point, its just i keep seeing people buying them going down this tuning avenue and the car ending up being scraped or going to a 500 owner. A few months back i wouldnt have cared, i would have been more supportive and encouraged it as its another 126 on the road, but im seeing it too often now without success.

look mate i hope you dont fly off the site as i can assure you there are plenty of people on here who are interested in all aspects of tuning/modification the last thing i want is your to think we are stuck up. I would like to see your progress pics and end result. This club is not about having the most members we can get its just about preserving the declinging number of 126(especialy aircooled ones) and enjoying them

regards

Chris
Title: 150 ish Bhp
Post by: PaulB on July 31, 2006, 02:07:13 PM
Nice one Chris. Each to their own. I am equally guilty of p*ss ripping customised cars. I realised after the "plop" scandal that even light hearted comments can be taken very seriously and can be hurtful.

There was a suggestion ages ago for a rodding section seperate from tuning for those who want to go down that route. Then if we don't like it, we just don't read it. There are plenty who do - many of whom seem to have left this site - which is a shame. I may not share their passion for huge engines, 1mm ground clearance and frequenting supermarket carparks [JOKE], but they mostly seem great people and have a genuine passion for their projects?

I think snobbery among 500 owners was one of the motivations for establishing the 126 club. It would be ironic if it became this forum's undoing.
Title: 150 ish Bhp
Post by: 126dave on July 31, 2006, 06:05:45 PM
good post,i agree,it was me that suggested a 'rodding' section,i think that is the way to go..........as you say,just do not read it if its upseting to see another 126 hit the dirt.

Tommo,dont go!!......just build a 100/140BHP road registered,MOT'd,insured and drivable(by anyone) 126 and i'll buy you a beer,but if you ''run out space''/''time''/''money''/whatever and bin it.....you buy me one,deal?...in fact i'll up that to £50.00........both ways mate  :cool: you wana take the wager????????
Title: 150 ish Bhp
Post by: 126dave on July 31, 2006, 09:20:23 PM
Tommo..............helllooooooo?????????? :lol:
Title: 150 ish Bhp
Post by: Tommy D on August 01, 2006, 12:03:54 AM
Fiatfsm, shut up #####! - (Foul Language removed, if such language is used again you will be removed from the forum.) C.Lakin

As for the others, especialy Chris who took the time to email me i have gained respect for you. I also accept that there are a wide range of people on here from those who want to keep things Classic and those who want to maximise the potential of the cars. I have already offered any standard parts i dont use, who knows i may enjoy the standard engine? I have great admiration for sleepers as well as classics. If someone has come on here and bodged one up before, dont judge the new guy.

I have lots of plans, ill just post what i do, if i have any problems ill sort it myself, that way ill have a 126 that reflects my style and taste, if u cant deal with that, u need a life outside this site.

As for the wager, i cant guarantee ill break 100bhp, it depends on what options are suitable and practical, i may even like the standard engine with BPU's. I am used to 200bhp+ cars so i might keep it simple and just enjoy the car. I will at some point boost the engine just for fun, iv had a look at the layout and with good cooling/fuelling etc the 8.0:1 CR should boost to 10psi, easily attainable with a small turbo. Maybe big Bhp is not the answer and just enjoying the car should be the main priority initialy. Who knows, i may not end up liking the car and sell it?  Untill i have anything done or achieved, thats all i have to say, thanks
Title: 150 ish Bhp
Post by: fiatfsm on August 01, 2006, 08:50:35 AM
meow :lol: great idea re the rodding section, then anyone who doesnt have any interest doesnt have to look, go for it.
Title: 150 ish Bhp
Post by: 126dave on August 01, 2006, 06:01:52 PM
hehehehe,i'll put my money away then................... :cool:........nah,think i'll splurge it on a hoodie..............................that'll give me at least 20bhp more,oh,and bolt the seat to the floor as well....................+10bhp.......if i keep going i mite get 100bhp + :lol:

you will have fun with the standard car tommo,you can drive them right at the limit and still not get any points!!!,but,if not,nigel is thinking of selling his fast and furious 650 motor i think???................if you have probs with modding/sourcing parts,ask on here,most of it has been done already,either here or in poland/germany.......
Title: 150 ish Bhp
Post by: dajwid on August 01, 2006, 09:35:35 PM
Echo!

Havn't we been here before?

I give the 126 3 months before it is sold on. 1 month tinkering, then giving up. 2 months standing and rotting, the ebay.

If not I am sure we would be happy to see the result.

Have a look at:

http://fiat126club.co.uk/forum/viewtopic.php?t=1040

250-300Bhp 126 been done.
Title: 150 ish Bhp
Post by: PaulB on August 01, 2006, 10:07:59 PM
Well, thousands upon thousands of these cars have been scrapped when they've been perfectly usable, and not by people like Tommy, but by people who have no regard for them at all, who think they are the greatest pile of crap ever made... MOT failures on a brake lining or badly adjusted handbrake.... dealers taking them as a deposit and then just junking them... people who don't change the oil for 30,000 miles....

I really don't have any interest in custom cars. I don't like many of them, more often  I just don't care. I quite enjoy ripping the **** out of the really stupid ones, but respect people like Slater and Nigel who really do something and go and create their own bit of pleasure. And there is something quite funny and ironic about the whole 126 tuning/customising scene. Its all a bit tongue in cheek.

I really think that everyone needs to accept a bit of ribbing, but there's having a laugh or being a bit cynical, and there's treating people like ****
Title: 150 ish Bhp
Post by: bis13 on August 01, 2006, 10:08:34 PM
ha ha ha i have had so much fun reading about this crap! and to think this is a car club how about crying over soldiers dying for nothing or innocents getting murdered by zionist war mongers?  not trying to be funny but just live and enjoy the club/ site and encourage others however crazy their ideas might be , build your car and kill yourself trying to drive it if that floats your boat cool. but please chill , listen to the dolphins  ccoo ccoo ccoo...... or i will get you with my machette .. he he he (must take the pills now , love mick) mwah
Title: 150 ish Bhp
Post by: PaulB on August 01, 2006, 10:16:10 PM
Bug*er - that's a much better post than mine  :D
Title: 150 ish Bhp
Post by: 126dave on August 02, 2006, 06:50:26 PM
loving this..........................mick,we are in the 3rd world(holy/oil) war,maybe its a point that the 2nd one never really was finished,but.its trully global this time tho with terrorisim etc.......they should have worked that out before inlisting,those guys arnt dying for nothing,took the kings shilling etc,anyone that has joined up in the last 20 or so years should expect some kind of action,not just the 'see the world' bit?,more so now.

i agree tho that bitchin over a 150 bhp 126 that may end up scrapped is small fry to what is happening/going to happen in the middle east...............................be nice to chat with you over a pint sometime................... :)...
Title: 150 ish Bhp
Post by: dajwid on August 02, 2006, 07:47:52 PM
jesus, you lot really don't read the papers or watch the news. We all know about the fact that by some cars are seen as 'weapons', put in a bigger engine and the distruction caused would be massive.

A while a go Mr Bush and later Mr Blair heard that a mad sod in Iraq planned on putting a big block chevy lump in a 126. A weapon of mass distruction. What could they do but attack.

This was no small story. 150 Bhp in a 126 in the UK. Do you really want Bush atacking?
Ok if a person lives on a desert island with empty roads like Jersey, nobody will notice a bright yellow 126 racing around with flashy brakes and revving its little head off at 150,000 revs with no silencer, but here in Europe we need to be carefull.
Build whatever you want but any sign of trouble and stick it in a cave.
Title: 150 ish Bhp
Post by: dajwid on August 02, 2006, 07:49:10 PM
jesus, you lot really don't read the papers or watch the news. We all know about the fact that by some cars are seen as 'weapons', put in a bigger engine and the distruction caused would be massive.

A while a go Mr Bush and later Mr Blair heard that a mad sod in Iraq planned on putting a big block chevy lump in a 126. A weapon of mass distruction. What could they do but attack.

This was no small story. 150 Bhp in a 126 in the UK. Do you really want Bush atacking?
Ok if a person lives on a desert island with empty roads like Jersey, nobody will notice a bright yellow 126 racing around with flashy brakes and revving its little head off at 150,000 revs with no silencer, but here in Europe we need to be carefull.
Build whatever you want but any sign of trouble and stick it in a cave.
Title: 150 ish Bhp
Post by: 126dave on August 02, 2006, 08:46:28 PM
jeez.......i cannot laugh anymore!!!!!!!!!!!!!!!!!!! tears here david!!!!!
Title: 150 ish Bhp
Post by: neil 126 on August 05, 2006, 09:09:05 PM
i just spent the last 20 minutes reading this thread, oh boy did i laugh.
i dont  know if i can compare to the previous elequance of entries.
when i got my first 126 i wanted to mod it and make it fast, but lacking in nearly any mechanical know how i settled for a standard run of the mill one, three years on i know the 126 but still want phat one.
anyone who can do it should do it.
good luck to anyone who tries.
Title: 150 ish Bhp
Post by: Chris Lakin on August 07, 2006, 11:14:09 PM
bk from 6 days in Isle of Wight (not a good place for a 126 without 1st gear, lots of hills) I saw 1 white bis, left a note etc. First thing i did when i got home was to turn pc on and catch up with forum posts. A full scale club civil war has erupted in my absence. Mick (BIS13) has proposed that our site will now be shut down and used for stop the middle eastern conflict, and the site has been hijacked by obscene language directed at our finest members.  :lol:  :lol: :lol: 126 club/forum was designed as a way of escapism from the everyday crap and to block out those perpetual images of war for example in the media. Long live 126 chat!!!!

regards

Chris
Title: 150 ish Bhp
Post by: bis13 on August 09, 2006, 09:56:29 PM
just to clear a point . i used the" soldiers dying for nothing "line as an example of misguided importance , the whole point is that this is a fun subject and the whole thread was just too heated and too serious for good reading and interaction.     :smt062   so there! he he
Title: 150 ish Bhp
Post by: stuey on August 10, 2006, 08:52:28 PM
1-build it!
2-prove us wrong! personally id love to see a 150bhp 126 (without a v8 hanging out the back!!!!!!)
3-put up a decent website that shows us how to do it so we can all build one!!!!!

oh and welcome to the foum!
Title: 150 ish Bhp
Post by: paul harbinson. on August 11, 2006, 08:12:56 AM
I havn't laughed as much since my granny caught her tit in the mangle :lol:
Title: 150 ish Bhp
Post by: Tomasz on August 11, 2006, 10:06:58 PM
Hey Tommy, i look forward to seeing how you get on too, i am interested in the whole tuning thing as well as long as its tasteful.  ACM did a really nice job with one of their projects.  It was lowered with flared arches and chrome bumpers.  Each to their own i say, everyone should relax, we are not going to run out of aircooled 126's, Poland is full of them (thats where mine is from!)  I do agree with leaving the old ones alone though.

Oh and to everyone, does anyone know where i can get a chrome filler cap like the original 126's, i emailed gerstl because i couldn't see any on their site but if anyone has one i would be most interested.

Cheers guys.
Title: 150 ish Bhp
Post by: 126dave on August 16, 2006, 07:18:27 PM
tomasz.....just noticed the pic of your car,does it have bis air intakes fitted?,standard or retro fitted??.or is it just the pic?...im thinking of fitting to mine,the normal ones are very small
Title: 150 ish Bhp
Post by: Tomasz on August 18, 2006, 09:12:59 AM
Yeah they are the larger intakes like on the bis.  Im not sure if it had these originally 'cause i didn't fit them.  Mine is a Polski Fiat from '91 so maybe they used these on some of their aircooled 126's.
Title: 150 ish Bhp
Post by: Chris Lakin on August 18, 2006, 11:05:56 AM
yer they seemed to do things like that, i think it depends where they were made, the ones for the czech had the bracket holes for the BIS bumpers. suppose you could change them, for a few quid but looks good!

Chris
Title: 150 ish Bhp
Post by: 126dave on August 18, 2006, 06:07:22 PM
i have some spare from the bis in the yard,i was thinking it might improve airflow..........there is quite a ''draw/suction'' from the fan thro the standard vents,it means cutting the body tho,not keen on that realy,but you ever know................... :lol:
Title: 150 ish Bhp
Post by: 126dave on August 19, 2006, 08:32:50 AM
i know you like your chrome tomasz.......did you know you can get most types of plastic ''flash'' chromed???....look in yellow pages for plastics companys/injection moulders......they will know of somewhere local to you.................we used to use small companys for ''cromeing'' our model car wheels etc when i was in business.....you could then get your air intakes etc done,they look like ABS to me,so should chrome ok.
Title: 150 ish Bhp
Post by: Tomasz on August 20, 2006, 02:45:59 PM
No i didnt know that, thank you, i will have to check that out!
Title: Re: 150 ish Bhp
Post by: Darrell on July 06, 2010, 03:47:28 PM
Any news on the 150hp 126? :oops: