Club126UK

Fiat 126 Chat => Fiat 126 Mechanical Problem Solving => Topic started by: derekscoopers on June 25, 2018, 08:17:33 AM

Title: 126 ELX WIRING
Post by: derekscoopers on June 25, 2018, 08:17:33 AM

I am fitting a complete new 500r loom from Autobella to my 126 but need to refer to an original 126ELX diagram to convert, it's mainly the column wiring I am interested in to cross over, does anybody have a copy of that system ?

Title: Re: 126 ELX WIRING
Post by: ChrisRLewis on June 25, 2018, 10:59:28 AM

At a guess I would suspect that the Bis wiring diagram would be very similar to the ELX, especially if it is just the steering column wiring that's needed.

Title: Re: 126 ELX WIRING
Post by: derekscoopers on June 25, 2018, 11:10:55 AM

Thanks Chris, found a couple on a Polish site but all in Polish !!

I am doing away with most switches on the stalks just want to know what they did and what wires to remove

Will look at the Bis diagrams

Cheers

Title: Re: 126 ELX WIRING
Post by: derekscoopers on July 02, 2018, 06:19:59 PM

well the Bis diagram helps a bit but have a question somebody may know the answer to,

The engine I have fitted has a pre engaged starter, and as well as the thick brown wire it has a red slightly thinner wire in a lucar connector right next to the main nut connector for the brown, this red wire does not appear on any of the diagrams I have, and I have quite a few !!

also does anybody have an old standard regulator box for sale , I dose not need to be  working, just to use for wire connections to the alternator, unless any other suggestions to keep the wires tidy.