Club126UK
Fiat 126 Chat => Tuning & Customising 126 Models => Topic started by: Bar Vitelli on February 18, 2018, 08:52:19 AM
-
Would these wheels fit a Fiat 126 aircooled car either early model or later edition?
https://www.ebay.it/itm/MINI-INNOCENTI-MINI-DE-TOMASO-RARI-CERCHI-CMR-5x12-OLD-STOCK/122954710751?hash=item1ca0abfedf:g:kawAAOSwI~taeg-t
If not, what modifications would be required to make them work?
-
They would only fit the later 98pcd wheels with wobble bolts so not ideal :)
-
I would have thought not as I thought the mini innocenti was based on the BMC/Leyand mini which I'm sure is an imperial PDC size like 4x101. That said though if you look at a classic mini wheel the studs look further apart than the ones in the innocenti wheels so maybe they were metric for the Italian market
-
I would have thought not as I thought the mini innocenti was based on the BMC/Leyand mini which I'm sure is an imperial PDC size like 4x101. That said though if you look at a classic mini wheel the studs look further apart than the ones in the innocenti wheels so maybe they were metric for the Italian market
101.5 apparently http://www.fitmentguide.co.uk/mg-rover-mini-wheel-fitment#one
-
Ooooh I was close :P
-
The wobble bolts I have seen will not cover the 3.5mm difference here.
-
Its a straightfoward job, get them offset drilled at TT Tools in Essex and use wobbly tuner bolts they have a smaller 60 degree taper .
-
Mine are mini wheels and they sorted these out no problem, fit perfect, remember to get the centre bore altered whilst your having the boilt holes done,
-
nice! 8)