Club126UK
Fiat 126 Chat => Fiat 126 Mechanical Problem Solving => Topic started by: amam on May 22, 2016, 04:28:27 PM
-
well on another thread i said on my MCA kit car (based on a 79 aircooled fiat 126) is pretty difficult to engage reverse gear, trying to do it even when pressing the gear stick down it 99% of the time engages 4th instead of reverse
the whole gear change doesnt seem very positive
i tried to adjust the linkage as it says in the haynes manual but hasn't made much difference
took a closer look and you can even see some of the broken bush under the gear stick
(https://scontent-lhr3-1.xx.fbcdn.net/v/t1.0-9/13239037_10207945890319261_7819919203930613091_n.jpg?oh=358b8e149ab26378dd1058b7e7a3aab7&oe=57E15DCE)
(https://scontent-lhr3-1.xx.fbcdn.net/v/t1.0-9/13267874_10207945890439264_8549615657287213135_n.jpg?oh=a4b7d80832fc9046db9ad768e44af997&oe=57D6984C)
im guessing this is the kit i need? and also is there anything else i need to improve it
http://www.superflex.co.uk/proddetail.php?prod=SF115-2899K
-
Hello
from your own experience suggests seen on these items
The problem can be worn with a gearbox rod coupling (loose)
or gear selector, to exchange
gear stick rather will be at the end of the suspect