Club126UK
Fiat 126 Chat => Fiat 126 Chat => Topic started by: amam on March 29, 2016, 08:49:47 PM
-
hello people
new to this as just bought a FIAT 126 based kit car
just wanted to know what oil people use in there aircooled engines?
the haynes manual states 15/40 mineral oil but some seem to use 20/50 classic oils
-
new to this as just bought a FIAT 126 based kit car
This wouldn't be the MCA from Classic
Richard in Wakefield, would it, by any chance ... ?
-
Hi, hope its the MCA you bought! :)
I use 15W/40 in my 126's
Chris
-
This wouldn't be the MCA from Classic
Richard in Wakefield, would it, by any chance ... ?
yes its the MCA Spider from wakefield
i wanted a coupe but beggers can't be choosers and it was on my doorstep
-
Castrol 20W/50 !! :)
-
I was told that its important to use an oil that ends with "40" e.g 10W40, 15W40 etc.
This is because the engines don't have a proper oil filter - instead they rely on a centrifuge.
If the oil you are using is too 'thick' then the little particles can't be flung out of the oil very easily, so the oil doesn't get filtered so well.
-
I was told that its important to use an oil that ends with "40" e.g 10W40, 15W40 etc.
This is because the engines don't have a proper oil filter - instead they rely on a centrifuge.
If the oil you are using is too 'thick' then the little particles can't be flung out of the oil very easily, so the oil doesn't get filtered so well.
i heard something a bit similar today, was told not to get oil with many additives or detergents in it since there is no filter or it just drag alot of the rubbish from the oil galleries and send it around the engine