Club126UK
Fiat 126 Chat => Tuning & Customising 126 Models => Topic started by: Frigorius on March 17, 2016, 12:19:10 PM
-
Few years ago, the ceiling of my Fiat 126 Bis started to come down. Certain moment, while explaining this to someone, I tore a little crack in it. Whilst this was exactly hanging in my face and giving a lot of dust, I decided to put a new ceiling in it.
(http://i259.photobucket.com/albums/hh307/Frigo/Fiat%20126%20ceiling/100_2547_zpsuelyexoc.jpg)
(http://i259.photobucket.com/albums/hh307/Frigo/Fiat%20126%20ceiling/100_2551_zpsqdq4u2mm.jpg)
When I started cutting, I discovered there was a wooden plate underneath it, and what appeared to be the rest of some isolating fiber. Which gave a lot more dust
(http://i259.photobucket.com/albums/hh307/Frigo/Fiat%20126%20ceiling/100_2552_zpsoeymxabx.jpg)
(http://i259.photobucket.com/albums/hh307/Frigo/Fiat%20126%20ceiling/100_2553_zpsu3pazxct.jpg)
This is where the drivers seat was normally located. A looooooot of dust :)
(http://i259.photobucket.com/albums/hh307/Frigo/Fiat%20126%20ceiling/100_2554_zpshtcfytrs.jpg)
At first, I was doing this very secure, slowly and making sure I did not break anything.
But that didn't take long, as I started pulling "a little heavier" towards the end
(http://i259.photobucket.com/albums/hh307/Frigo/Fiat%20126%20ceiling/100_2555_zpsd1ua5yvc.jpg)
(http://i259.photobucket.com/albums/hh307/Frigo/Fiat%20126%20ceiling/100_2556_zpsinxafvwn.jpg)
Which you can't actually see on this picture, but you can believe me when I say the ceiling did not had any plans in the direction of leaving the car, before I started pulling. Quite robust, I'd say.
But I won:
(http://i259.photobucket.com/albums/hh307/Frigo/Fiat%20126%20ceiling/100_2557_zpsledg69c6.jpg)
(http://i259.photobucket.com/albums/hh307/Frigo/Fiat%20126%20ceiling/100_2557_zpsledg69c6.jpg)
Now I could start the manufacturing of a new ceiling.
(http://i259.photobucket.com/albums/hh307/Frigo/Fiat%20126%20ceiling/100_2559_zpsy5ux9rfj.jpg)
(http://i259.photobucket.com/albums/hh307/Frigo/Fiat%20126%20ceiling/100_2560_zpshlrcz63u.jpg)
I added the tape, to make sure there was no trembling going on up there
(http://i259.photobucket.com/albums/hh307/Frigo/Fiat%20126%20ceiling/100_2561_zpsycct4xya.jpg)
(http://i259.photobucket.com/albums/hh307/Frigo/Fiat%20126%20ceiling/100_2562_zpsodjmx7au.jpg)
While I'm not such a good craftsmen, I had to screw - unscrew most of these planks numerous times.
And then again.
(http://i259.photobucket.com/albums/hh307/Frigo/Fiat%20126%20ceiling/100_2563_zpsijjgxqyn.jpg)
For example: did you know you can never fit in that fifth one, if you don't unscrew the fourth and the middle one?
(http://i259.photobucket.com/albums/hh307/Frigo/Fiat%20126%20ceiling/100_2564_zpsmjjgwd0u.jpg)
(http://i259.photobucket.com/albums/hh307/Frigo/Fiat%20126%20ceiling/100_2565_zpsw18mcsl3.jpg)
Try to put the screw in a nice straight line. By measuring and drawing a line, as some one said to me later, in stead of trying to do that with eye sight.
(http://i259.photobucket.com/albums/hh307/Frigo/Fiat%20126%20ceiling/100_2566_zpswi63urbo.jpg)
(http://i259.photobucket.com/albums/hh307/Frigo/Fiat%20126%20ceiling/100_2567_zpsats1ns0d.jpg)
In a later stadium, I have changed the sun flaps (? ). In the future, I will add speakers to the ceiling too. And maybe some lights.
Hope you liked the story.
-
Wow :o never seen a 126 with a solid thick wooden roof lining before. Looks good and good luck to you.
Doesn't your head bump on it?
-
Different :o ;D
-
Very handy if you roll it on its roof....................... LOL
-
Adds a lot of weight this.
-
@Bambino 126: I have order new seat springs, so mayby my head will bounce again it then. But for the moment I still have 18 cm free space :-). I'm not so big myself :-)
@Da Londo: This I very thin wood, I guess it adds ten kg at most.
@126 Blackbird: let's not try that :-)