Club126UK
Fiat 126 Chat => Tuning & Customising 126 Models => Topic started by: Darrell on March 03, 2016, 11:26:14 AM
-
Anyone tried it?
Seems fairly strait forward however I can see myself getting a shock or two and burnt fingers.
-
I used one years ago, it's ok for getting the mixture set for idle so that the idling is smooth. If I remember you have to make sure that the glass doesn't get sooted, otherwise you will have difficulty viewing the combustion flame, there should be a cleaning kit included in the kit.
-
Yeah there is a little brush included.
-
I saw this recently on YouTube.
https://www.youtube.com/watch?v=Y9t8XhFlKbk
-
I have one and used it to tune up a 2 stroke twin motorbike, much easier than removing the plug, adjusting,running, removing the plug to check again.
Used to take ages setting each carb up, this made it much less trouble :)
-
I have one ..sort of okay.
-
I own one but never had any luck with it setting up the carb on the 126 bis. I also have Gunson's Gastester which seems a much more useful tool in my eyes.
I wound the mixture screw in (lean) so far the engine was almost stalling and jumping around and running unevenly - the Colortune plug showed blue. The gastester said 0.5%. The other spark plug in the engine now had white deposits.
Next I turned the mixture screw out a few more turns untill the engine seemed "happy" and idled very smoothly - the colortune showed blue - the gastester said 1.7%, the other plug had light brown deposits.
Next I screwed out the mixture screw a long way until the engine was hunting badly it was so rich - the Colortune just stayed blue - the gastester said 3.7% and the other plug now had black deposits.
So I settled on the middle setting where it was happy but learned nothing at all from the Colortune - It always displayed blue.