Fiat 126 Chat > Reputable Companies

Reverse Eyed Spring Lowers Front By 30mm

(1/2) > >>

Pete126:
I had my front spring refurbished and made into reverse eye by these guys, they did a good job and it works well, and it cost less than half the price of importing one, around 50/60quid

P.S. I forgot to add this lowers the front of the car by 30mm



SMJ.
LEAF SPRINGS MANUFACTURERS.
UNIT 5B.
STANINGLEY TRADING ESTATE.
PUDSEY.
LEEDS LS28 6BZ.
Tel 0113-2360396  Fax0113-2612357

mattlucas:
hi there can you tell me do you need any special tools to remove / attach the leaf spring ??

MaLi:
And one question from me:
Is the last leaf spring just up-side down or they have bend both ends of it to make eyes higher? (I cannot see on the foto)

Pete126:
no special tools needed Matt, a couple of jacks, axel stands, and common sense, be very careful, you must support the spring at each end.

As for the spring Mali, they strip it down and re-temper/bend the bottom leaf, with the eyes on top, then reassemble it.

MaLi:
Thanks!

I am just bit worried that leaf can crack near eyes. I'll wait and see if it will.  

If nothing happens I'll do the same to mine   :wink:

Navigation

[0] Message Index

[#] Next page

Go to full version