Author Topic: lowering 126's  (Read 6086 times)

0 Members and 1 Guest are viewing this topic.

stuey

  • Subscribers
  • Super Member
  • ****
  • Posts: 1409
  • Karma: 14
  • Location: kings lynn
lowering 126's
« on: April 04, 2005, 08:10:32 PM »
Ive got a 126 bis sitting on mag alloys on 175/50/13 tyres (see avatar)and I want to lower it thoughts and idea and reccomended places to buy the bits?  :?:
one resprayed and another arrives- double trouble BIS style!!

Chris Lakin

  • Super Member
  • ***
  • Posts: 2105
  • Karma: 0
    • http://www.fiat126.co.uk
lowering 126's
« Reply #1 on: April 04, 2005, 09:04:51 PM »
Hi stuart you could try ricambio send them an email, see what they say remember you get 10% off ;)

I got your payment ok Stuey, nice to see a pic of your car too.

Chris Lakin
+ SKYPE USERNAME: fiat126.co.uk
+ CLUB (ENQUIRIES): fiat126club@gmail.com

stuey

  • Subscribers
  • Super Member
  • ****
  • Posts: 1409
  • Karma: 14
  • Location: kings lynn
lowering 126's
« Reply #2 on: April 05, 2005, 12:22:43 AM »
thanks chris ill give them a go.. glad you like the car lots to do yet but its getting there...
one resprayed and another arrives- double trouble BIS style!!

PaulB

  • Super Member
  • ***
  • Posts: 333
  • Karma: 0
lowering 126's
« Reply #3 on: April 12, 2005, 08:00:23 PM »
anyone tried the road sets (springs/shocks) from 500sport or 500mania? i think they are both the same. Just wondered how hard they are... are they going to ruin the ride?

Cheers

stuey

  • Subscribers
  • Super Member
  • ****
  • Posts: 1409
  • Karma: 14
  • Location: kings lynn
lowering 126's
« Reply #4 on: April 12, 2005, 08:54:41 PM »
paul do they have a website/ phone numebr? ill give them a call to find out..
one resprayed and another arrives- double trouble BIS style!!

PaulB

  • Super Member
  • ***
  • Posts: 333
  • Karma: 0
lowering 126's
« Reply #5 on: April 14, 2005, 08:38:07 AM »

stuey

  • Subscribers
  • Super Member
  • ****
  • Posts: 1409
  • Karma: 14
  • Location: kings lynn
lowering 126's
« Reply #6 on: April 14, 2005, 06:42:19 PM »
these look like what i am after , im wating to for a price from ricambio but if they come in more expensive ill give one of these guys a try.... really like this coilover set up-

http://www.fiat500sport.com/foto/0479_s.jpg[/img]

thanks

stuey :)
one resprayed and another arrives- double trouble BIS style!!

PaulB

  • Super Member
  • ***
  • Posts: 333
  • Karma: 0
lowering 126's
« Reply #7 on: April 14, 2005, 07:33:53 PM »
My worry is the ride will be too hard. Also beware that 500 and aircooled suspension is pretty interchangeable. the BIS has a different setup at the back and maybe at the front?

there's a couple of german suppliers that stock alot of 126 stuff, though the tuning gear is quite pricey.

that said, prices in the UK are about ?1 = ?1, which is crazy.

slater

  • Super Member
  • ***
  • Posts: 215
  • Karma: 0
    • http://www.retro-rides.com
lowering 126's
« Reply #8 on: April 14, 2005, 08:48:44 PM »
Ive been looking at coilovers/lower wishbones for mine, Do you think coilovers like the ones 500sport sell woudl be avalible from a uk company like GAZ or Avo?


stuey

  • Subscribers
  • Super Member
  • ****
  • Posts: 1409
  • Karma: 14
  • Location: kings lynn
lowering 126's
« Reply #9 on: April 14, 2005, 09:36:31 PM »
Quote from: "slater"
Ive been looking at coilovers/lower wishbones for mine, Do you think coilovers like the ones 500sport sell woudl be avalible from a uk company like GAZ or Avo?


slater ive tried alot of the british companies but they simply dont touch it because of the leaf set up on the front  a custom cmpany say like andy robinson racing might build you a similar bolt in set up for about the same price as the italian companies......  ive seen rear clip set ups for tubbing out strett rods that are of a similar type...... worth a try.
one resprayed and another arrives- double trouble BIS style!!

slater

  • Super Member
  • ***
  • Posts: 215
  • Karma: 0
    • http://www.retro-rides.com
lowering 126's
« Reply #10 on: April 14, 2005, 09:58:56 PM »
Yep thats pretty much what i was expecting. :(

Im going to build the wishbones and x-member myself, that part is easy. I was hoping i could get hold of some shocks that would bolt in without body mods but if i cant get any over here i can do the body mods and fit generic coilovers.

Im not afrade of a little fabrication, done it all before. just tryign to get an idea of whats avalible

stuey

  • Subscribers
  • Super Member
  • ****
  • Posts: 1409
  • Karma: 14
  • Location: kings lynn
lowering 126's
« Reply #11 on: April 14, 2005, 10:01:26 PM »
try rayvern hydralics, ray might be able to help the build all sorts of stuff like that....
one resprayed and another arrives- double trouble BIS style!!

stuey

  • Subscribers
  • Super Member
  • ****
  • Posts: 1409
  • Karma: 14
  • Location: kings lynn
lowering 126's
« Reply #12 on: April 15, 2005, 09:48:17 PM »
depends on the amount of batteries and the size of the bags you use, bagged cars can go quick but you really want  hydralic rams for proper fast up/down action check rayverns site for info.... (no i dont have shares)
one resprayed and another arrives- double trouble BIS style!!

slater

  • Super Member
  • ***
  • Posts: 215
  • Karma: 0
    • http://www.retro-rides.com
lowering 126's
« Reply #13 on: April 15, 2005, 11:05:57 PM »
I know you can get the stuff to do Minis so it shouldent be that hard to find 8)

gorilly

  • Member
  • *
  • Posts: 50
  • Karma: 0
    • http://www.fiat126.co.uk
lowering 126's
« Reply #14 on: April 17, 2005, 11:29:42 PM »
Quote from: "PaulB"
anyone tried the road sets (springs/shocks) from 500sport or 500mania? i think they are both the same. Just wondered how hard they are... are they going to ruin the ride?

Cheers

if your running on low profile tyres you will have a bumpy ride no matter what suspension your have (if you dont then you need to change your springs and shocks!).

the handling will be improved.


try looking at some VW caddy forums/FAQs, they have leaf suspension and the caddys have been heavily modded so they are experts when it comes to leaf suspension!. a common thing they do is flip the axel giving around a 2 inch drop, but go take a look, it might help
problems with your pc?
www.ccleaner.com (be clean!)
www.mozilla.com (get firefox for safer browsing)
http://www.safer-networking.org/en/index.html (spybot to get rid of those nasties)

 

SimplePortal 2.3.6 © 2008-2014, SimplePortal