Author Topic: Fuse box - unidentified relays  (Read 115 times)

0 Members and 1 Guest are viewing this topic.

andyzeetec

  • Super Member
  • ***
  • Posts: 397
  • Karma: 2
  • 126 BIS
  • Location: EAST SUSSEX
Fuse box - unidentified relays
« on: May 06, 2019, 01:39:42 PM »
Hi.

Does anyone know what the 2 relays are at each end of the fuse box, as they are not shown in the workshop manual.

Thanks.

nick7nick7

  • Member
  • *
  • Posts: 24
  • Karma: 0
  • Location: scunthorpe
Re: Fuse box - unidentified relays
« Reply #1 on: May 06, 2019, 03:52:45 PM »
big round one is indicator relay,
The other i think is for the headlight

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1660
  • Karma: 8
  • I may be slow, but im still in front =D
Re: Fuse box - unidentified relays
« Reply #2 on: May 13, 2019, 01:51:24 PM »
If you mean the two outside the box i do not Know, but mine has them too, so i wish someone would shed some light on the subject. All I Know my First bis did not have them so they might be aftermarket. I plan to remove them once i re-install my wiring loom and see what happens.


p.s. try taking it out and see what does not work….  ;D


Da Londo

  • Super Member
  • ***
  • Posts: 279
  • Karma: 0
  • It's not the carb size that matters, it's the jet
    • Fiat 126 blog
  • Location: Maasmechelen, Belgium
Re: Fuse box - unidentified relays
« Reply #3 on: May 13, 2019, 04:15:37 PM »
p.s. try taking it out and see what does not work….  ;D

What he says!

Sent from my HUAWEI VNS-L31 using Tapatalk
« Last Edit: May 13, 2019, 04:17:11 PM by Da Londo »

andyzeetec

  • Super Member
  • ***
  • Posts: 397
  • Karma: 2
  • 126 BIS
  • Location: EAST SUSSEX
Re: Fuse box - unidentified relays
« Reply #4 on: May 13, 2019, 09:01:53 PM »
If you mean the two outside the box i do not Know, but mine has them too, so i wish someone would shed some light on the subject. All I Know my First bis did not have them so they might be aftermarket. I plan to remove them once i re-install my wiring loom and see what happens.


p.s. try taking it out and see what does not work….  ;D

Yes, the 2 outside the box each end. The fact that the worshop manual doesn't show them suggests there was a design/revision change at some point, but the manual wasn't updated to refect the changes. Good idea, I'll give it a go at some point.