Fiat 126 Chat > Fiat 126 Mechanical Problem Solving

Brakes pulling on one side

(1/1)

Neville Minuti:
Hi
Recently I changed the following:
Master cylinder
Shoes for the 4 wheels
All Wheel cylinders - front larger than the rear
Brake rubber hydraulic pipes of 4 wheels.

Now I have the car pulling on one side, i.e. the front right wheel and rear left wheel are braking well.

What could the problem be?

Thanks,
Neville

Pete126:
The self adjusters on the shoes may be stuck and might not have adjusted yet, on a clear road stamp on the brake pedal, do some emergency stops forward and reverse see if it improves

Gordan:
It seems that only one hydraulic circuit is working properly then. As far as i Know there are 2 hydraulic circuits that operate the brakes - one front and one rear wheel, independently. Something must be up with one of the circuits, ie. a clogged pipe or air in the pipes. try bleeding the brakes again and see if that helps….

Neville Minuti:
Thanks everyone for the feedback

Navigation

[0] Message Index